ALPS ALPINE P74P0 Switch Assy Immobilizer Antenna User Manual user manual P74P0

Alps Electric Co., Ltd. Switch Assy Immobilizer Antenna user manual P74P0

User Manual

　The connector is arranged as shown in the figure below.■CAUTION■・Disassembly and modification.Operating voltage DC6～16V・Do not contact and bring metals close to the engine SW and the key.・It may not be operated when using the equipment of the same frequency band in the vicinity.・Give a shock.・Get it wet. If it got wet, wipe and dry up.Consumption current spec MAX 150mA(@12.5V 25℃) at operation　Since this device is always used with vehicle, it is not sold to general end users separately.Therefore there is no user manual ofthis device by alone.The following statements must be described on the user manual of the vehicle;Operating temperature range -40~＋85　degree CMAX 0.7mA(@12.5V 25℃) at standbyWeightDC6V～16VAC/DC SupplyUser's Manual　It communicates with IC used both as Transponder and Passive RKE through LF ANT(Z axis) of I-key H/U, and operates as ANTto exchange communication data depending on community signal with BCM.　The immobilizer antenna communicates with the transponder in the hand unit when the hand unit is brought close, and receives thecode of the key. The immobilizer is used by bringing the hand unit close as shown in figure.Product name : Switch Assy Immobilizer AntennaType : P74P0Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority tooperate the equipment.Size This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interference that may cause undesired operation of thisdevice.Operation of frequency 125kHz Please DO NOT the following. Engine is not started by failure of electronic parts. (Product can not receive the signal correctly)DC12VRange of voltageConsumption current Under 0.7mA（Standby current）W45.0xL57.7xH45.0（mm）FCC WARNING Pay attention to the following.(The operation range might be changed by the environment. )0.043kgHUND UNIT Switch Assy Immobilizer AntennaCONNECTORPINLAYOUT

Navigation menu