ALPS ALPINE SVH300UW Headphone User Manual 0

Alpine Electronics Inc Headphone 0

Contents

User Manual 3

Turning on Your HeadphonesGetting Started11Press the power button to turn on the headphones. A white light will appear for 2 seconds, and then will blink to indicate the headphones are on. To turn off the headphones, press the power button.When there is no audio for 45 seconds, the headphone power automatically shuts off.The power button turns red to indicate low power and the need to charge the headphones.Using Your HeadphonesBlinkingRedWhiteBlack Power OffPower OnBattery OKBattery LowNeed to ChargePower On -Power On -BlinkingBattery Power Indicators
Charging Your HeadphonesGetting Started12Headphones should be fully charged before they are first used.To charge the headphones, connect the micro USB cable to the headphone USB port. You can use an AC adapter with a USB jack, for example the one that comes with your iPhone. Please note Alpine headphones do not include an AC adapter. The power button stays red while charging. The power button light changes to white when the headphones are fully charged, which takes about 4 hours.Using Your Headphones
Using the Audio Cable Remote ControlGetting Started13Adjusting VolumeTo increase volume, push the top button on the remote control.To decrease volume, push the lower button.Play /PauseTo play or pause the music, press the middle button.Next TrackTo skip to the next track, rapidly press the middle button twice.Previous TrackTo go back to the previous track, quickly press the middle button three times.Fast ForwardTo fast forward, quickly press the middle button twice and hold.RewindTo Rewind, quickly press the middle button three times and hold.Answer/End Phone CallTo answer or end a phone call, press the middle button.Using Your Headphones12313222222The remote control and microphone attached to the audio cable are intended for use only with Apple products.
Folding Your HeadphonesGetting Started14Using Your HeadphonesYour headphones can be folded flat to make them easier to pack. Carefully turn the right earcup inward, to the left, and turn the left earcup inward, to the right, until each is at a 90-degree angle to the headband.
Technical Specifications15Impedance 30 ± 20% Ω at 1kHzFrequency response 15Hz - 24,000HzSound pressure level 107dB ± 3dB at 1kHz maxTotal harmonic distortion <0.1 % at 1mW/1kHzNOTE: Specifications and design are subject to change without notice.
Limited Warranty16This warranty, effective 1 year from original purchase date, covers product defects in materials or workmanship. This warranty covers only the original product purchaser or person who received the product as a gift, and only residents of the United States, Puerto Rico or Canada.This warranty does not cover normal wear and tear, loss or theft; damage occurring during product shipment for repair, or damage caused by negligence, improper operation or failure to follow instructions in the owner’s manual or if caused by act of God or other acts of nature; service performed by an unauthorized person, company or association; any product with serial number defaced, altered or removed; any product not distributed by Alpine in the United States, Puerto Rico, or Canada, or not purchased from an Authorized Alpine dealer.How to obtain warranty service1) You are responsible for sending the product to Alpine Customer Service (USA), Inc. for repair, and for paying initial shipping charges. If warranty covers repairs, Alpine will either repair or replace the product with a new or reconditioned one without charge, and will pay return shipping charges. 2) Provide a detailed description of the problem(s) requiring service. 3) Supply proof of product purchase. 4) Package the product securely to avoid damage during shipment. ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE. NO PERSON IS AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH SALE OF THE PRODUCT.ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. “INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE ORIGINAL PURCHASER’S TIME AND LOSS OF USE OF THE PRODUCT. “CONSEQUENTIAL DAMAGES” REFERS TO COST OF REPAIRING OR REPLACING OTHER PROPERTY DAMAGED WHEN THIS PRODUCT DOES NOT WORK PROPERLY. REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
Limited Warranty17This warranty gives you specific legal rights. You may have additional rights that vary according to state or country. Should the product require service, please call Alpine Tech Support to verify issue. Once verified, send to Alpine Customer Service (USA), Inc. at 2012 Abalone Ave., Unit D, Torrance, CA 90501.CUSTOMER SERVICE 1-800-421-2284, ext. 860304TECH SUPPORT 1-800-TECH-101 (1-800-832-4101)or visit our website at http://www.alpine-usa.com.ALPINE ELECTRONICS OF AMERICA INC., 19145 Gramercy Place, Torrance, California 90501, U.S.ADo not send products to this address.©2014 Alpine Electronics of America, Inc. All rights reserved.“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. iPhone, iPod and iPod nano are trademarks of Apple Inc., registered in the U.S. and other countries.Made foriPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPod with Video, iPod nano (6th and 7th generation)

Navigation menu