ALPS ALPINE WB1G0125 TRANSMITTER, ELECTRICAL KEY User Manual Short Term Confidential

Download:
Mirror Download [FCC.gov]
Document ID	2997470
Application ID	01pI+hA+CK+AI+mkt9jftA==
Document Description	(Short-Term Confidential) User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.8kB (197510 bits)
Date Submitted	2016-05-20 00:00:00
Date Available	2016-11-17 00:00:00
Creation Date	2016-05-20 08:52:05
Producing Software	Acrobat Distiller 10.1.2 (Windows)
Document Lastmod	2016-05-20 08:52:05
Document Title	(Short-Term Confidential) User Manual
Document Creator	PScript5.dll Version 5.2.2

Since this device is always used with vehicle, it is not sold to general end users separately.
Therefore there is no user manual of this device by alone.
1. Electrical Characteristics
(1) Hand Unit
Lock
Lock
Unlock
Unlock
Trunk
R-psd
Panic







Modulation type
Operating supply voltage
Operating supply current
Stand-by current
Operating ambient temperature
Antenna direction
Battery life
L-psd
R-psd
Transmission：FSK Reception：ASK
2.5V ~ 3.2V (3.0V Battery)
< 15mA
< 7.5uA
-20oC to +60oC
3-Dimension (X, Y, Z), to be considered
2.5 Years (Low battery indication is considered)
2.Passsive Accsess Entry Functionality
A handle sw located on, for example the door handles, mirrors and trunk lid will be used for proximity check
if user is in neighborhood of the vehicle. The switch input will trigger for unlocking and open the doors and
trunk.
Door Handle SW
Figure 1
2.1.Door Unlocking





User pushes door handle sw.
ECU sends LF-challenge via exterior antenna.
FOB sends RF-response to the ECU.
Door unlocking status is engaged.
Doors are opened.
LF
RF
Figure 2
FOB
2.2.Engine Start






User operates the engine start knob or switch.
ECU sends LF-challenge via interior antenna.
FOB sends RF-response to the ECU.
Immobilizer ECU receives and authorizes the response.
Engine controller ECU receives the authorization for engine start.
Start the engine.
RF
LF
FOB
Figure 3
2.3.Engine Stop




User operates the engine stop knob or switch.
ECU communicates with the other ECU for engine start request.
Engine controller ECU receives the request.
Stop the engine.
Figure 4
2.4.Door Locking (Push switch)






User closes the door and pushes the switch (sensing of door locking switch).
ECU sends LF-challenge via exterior antenna.
FOB sends RF-response to the ECU.
Door locking status is engaged.
Doors are locked.
(Indicates the door locking status by means of Flasher / Buzzer or stuff)
2.5.Trunk Opening




User pushes trunk sw.
ECU sends LF-challenge via exterior antenna.
FOB sends RF-response to the ECU.
Trunk is opened.
3.Active Access Entry Functionality
3.1.Door Unlocking
Same functionality as the current one.
3.2.Engine Start
This function does not effect on the active entry system.
3.3.Engine Stop
This function does not have influence on the active entry system.
3.4.Door Locking
Same functionality as the current one.
3.5.Trunk Opening
Same functionality as the current one.
4. Communication Areas
Exterior operating range:
Interior operating range:
MIN 0.8m
Only inside the car
Number of the exterior exciters:
Number of the interior exciters:
typ.3, however, it is depending on the type of the vehicle.
max.4 (min.2)
Interior
Exterior
Dr
As
Back
Figure 5
Exterior antenna functionality:
 Unlock / lock doors.
 Open trunk.
 Activate / deactivate alarm system.
 Activate immobilizer
Interior antenna functionality:
 Deactivate immobilizer
 Engine start
5. Marked contents
The following statements must be described on the user manual of the vehicle;
FCC ID is marked inside the product.
A user replaces the battery without using special tools.
And FCC ID can be confirmed when the battery is replaced
-CAUTION - Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
-CAUTION - Do not exposed to excessive heat such as sunshine, fire or the like.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2016:05:20 08:52:05+09:00
Modify Date                     : 2016:05:20 08:52:05+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.2 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:aa7bce60-60d2-4832-9cde-6f3a0f8998dc
Instance ID                     : uuid:37d5dc64-f3df-42fa-b1a8-45c58c40cdcf
Page Count                      : 6

EXIF Metadata provided by EXIF.tools