ALPS ALPINE WB1U331 Automobile Security System User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	170547
Application ID	fz6oLNwD1+Y6uqC852NPDQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.13kB (489165 bits)
Date Submitted	2001-09-20 00:00:00
Date Available	2001-09-18 00:00:00
Creation Date	2001-09-14 11:10:41
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-09-14 11:10:52
Document Title	users manual
Document Creator	Microsoft Word 9.0
Document Author:	Alps Automotive, Inc.

7. Insert the shade into the side mounting brackets and check to make
sure that it operates properly.
Cargo utility hooks (Sedan)
The utility hooks located in side the trunk can be used to hang small
items on. Do not hang more than 12 kg (20 lbs) on the hooks. The hooks
are not designed to restrain objects during a collision.
REMOTE ENTRY SYSTEM (IF EQUIPPED)
The remote entry system allows you to look or unlock all vehicle doors,
trunk and liftgate Without a key
The remote entry features only operate with the vehicle in P (Park) or N
(Neutral) and the ignition in the, ACC, OFF or ON positions.
If there is any potential remote keyless entry problem with your vehicle, 3
ensure ALL key fobs (remote entry transmitters) are brought to the
dealership, to aid in troubleshooting.
Unlocking the doors/litigate 6‘
Press this control to unlock the
driver‘s door. The interior lamps W'lll
illuminate with the ignition OFF.
Press the control a second time
within three seconds to unlock all
doors and liftgate (wagons).
66
Locking i
press this
and liftgal
To confirr
lot ked, Pl
tune with
do s W111
“ill chirp
ll any of t
ajar. the l
clm‘ps, re
(lose all (
, Unlockin
( Press the
Iiflgate/tr
Soundin
Press thi:
alarm.
To deacti
control a
ACC or (
This ClEV]
the FCC
Industry
subject 1
conditior
cause ha
interfere
operatic!
oaks
it is
Will
e h mks
do< 1 ‘
rk) x N
vchh'lc.
) thv
A and liftgate (wagons)
V 1b confirm all doors are closed and
‘ Lacking the doors/Iiflgate @
Press this control to lock all doors
locked, press the control a second
time within three seconds, The
doors will look again and the horn
will chirp.
If any of the doors or liftgate are
ajar, the horn will make two quick
chirps, reminding you to properly
close all doors.
Unlocklng the litigate/trunk
Press me control to unlock the
liftgate/trunk.
Sounding a panic alarm 13)
Press this control to activate the
alarm.
To deactivate the alarm, press the
control again or turn the ignition to
ACC or ON.
This device complies with part 15 of
the FCC rules and with R82“) of
industry Canada, Operation is
subject to the following two
conditions: (1) This device may not
Cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
oDeraition.
67
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment
Illuminated entry
The interior lamps illuminate when the remote entry system is used to
unlock the door(s).
The system automatically tum; off after 25 seconds or when the ignition
is turned to the ON or ACC position. The dome lamp control (if
equipped) must not be set to the OFF position for the illuminated entry
system to operate.
The inside lights will not turn off if:
0 they have been turned on with the dimmer control or
0 any door is open,
The battery saver will shut off the interior lamps 10 minutes after the
ignition has been turned to the OFF position
Replacing lost transmitters
If a remote transmitter has been lost
and you would like to remove it
from the vehicle’s memory, or you
would like to purchase additional
remote transmitters and have them
programmed to your vehicle:
0 Take all your vehicle's
transndtters to your dealer for
programming, or
0 Perform the programming
procedure yourself
Programming remote transmitters
It is necessary to have all (maximum of [our 7 original and/or new) of
your remote transmitters available prior to beginning this procedure.
To pros
- Placr
mm
and
l(0l
tucc
with
4 (C
lock
pros
o Wltl
butt
rem
paSl
mo<
- Re]:
i The
t bee
‘ . Wh
the
loo]
Repla
The r
butter
be up
opera
U Vile
- ne:
0 str
0 ct]
;ed to
ignition ‘
ed entry
ar the
new) «it
dure.
To program the transmitters yourself:
. Place the key in the ignition and e,
turn from 2 (LOCK) to 3 (oer) @ 6) i”
and cycle between 3 (OFF) and r;
4(ON) eight times in rapid / l®‘
succession (within 10 seconds) /
with the eighth turn ending in the @ \@
4 (ON) position. The doors Will
lock/unlock to confirm that
programming mode has been entered.
c Within 20 seconds, program a remote transmitter by pressing any
button on a transmitter: The doors will lock/unlock to confirm that the
remote transmitter has been programmed. (If more than 20 seconds
pass before pressing a remote transmitter button, the programming
mode will exit and the procedure will have to be repeated.)
- Repeat the previous step to program additional remote transmitters.
The doors will lock/unlock to confirm that each remote transmitter has
been programmed.
- When you have completed programming the remote transmitters, turn
the ignition to 3 (OFF) or wait 20 seconds. Again the doors will
lock/unlock to confirm programming has been completed.
Replacing the battery
The remote transmitter is powered by one coin type three-volt lithium
battery CRZOSZ or equivalent. Typical operating range will allow you to
be up to 10 meters (33 feet) away from your vehicle A decrease in
operating range can be caused by:
0 weather conditions
- nearby radio towers
0 structures around the vehicle
' other Vehicles parked next to the vehicle
69
To replace the battery:
1. Twist a thin coin between the two
halves of the transmitter near the
key ring. DO NOT TAKE THE
FRONT PART OF THE
TRANSMITTER APART.
2. Place the positive (+) side of new
battery in the same orientation.
Refer to the diagram inside the
transmitter unit.
3. Snap the two halves back
together.
Replacement of the battery will not cause the remote transmitter to
become deprogrammed from your vehicle, The remote transmitter should
operate normally after battery replacement.
PERIMETER ALARM SYSTEM (IF EQUIPPED)
The perimeter anti-theft system will help prevent your vehicle from
unauthorized entry.
If there is any potential perimeter anti»theft problem with your vehicle,
ensure ALL key fobs (remote entry transmitters) are brought to the
dealership, to aid in troubleshooting.
Arming the system
When armed, this system will help protect your vehicle from
unauthorized entry. When unauthorized entry occurs, the system will
flash the headlamps and/or parking lamps, and Wlll chirp the horn.
The system is ready to arm whenever the key is removed from the
ignition. Any of the following actions will prearm the alann system:
70
. Press
contrt
. Press
keyles
time t
npene
. Open
There is
before tl
Each dot
door/boo
armedi
When yo
tmce Wii
remote G
will chit;
all doors.
are close
lf the do
remote G
will chin
open.
‘om
Iehicle,
to the
he
em:
- Press the remote entry lock
control (doors opened or closed).
- Press 7/8 and 9/0 controls on the
keyless entry pad at the same
time to lock the doors (doors
opened or closed).
0 Open a door and press the power door lock control to lock the doors.
There is a 20 second countdown when any of the above actions occur
before the vehicle becomes ARMED
Each door/hood or liftgate (Wagon) arm individually, and if any
door/hood or liftgate (Wagon) is open, then it must be closed for it to be
armed
When you press the lock control
twice within three seconds on your
remote entry transmitter, the horn
will chirp once to let you know that
all doors/hood and liftgate (wagon)
are closed.
lfthe doors/hood or liftgate (wagon) are not closed and you press the
remote entry transmitter twice to confirm the doors are locked, the horn
Will chirp twice to warn you that a door/hood or liftgate (Wagon) is still
open.
71
Disarming the system
You can disarm the system by any of the follom'ng actions-
- Unlock the doors by using your
remote entry transmitter.
0 Unlock the doors by using your [xf‘h‘
keyless entry pad, 1 2 3 4 5
- Unlock the doors or liftgate with a key. Tum the key full travel
(toward the front of the vehicle) to make sure the al
0 Turn ignition to ON.
- Press the PANIC control on the
remote entry transmitter. This
will only shut the horn OFF when
the alarm is sounding. The alarm
system nil] still be armed.
Triggering the anti-theft system
The armed system will be triggered if;
- Any door, Liftgate or hood is op
remote entry transmitter.
c The trunk is forced opened.
72
Lew. - ~6
arm disarms.
KEY
Witl:
can:
1 0 lo
0 or
- ar
See :
chap
Your
entn
code
0 0D
- ta]
- or
WheI
midd
Prog
1. En
2. PH
secor
3, En
Enter
ened without using the door key or the
of ths
Do in
three
press
Tinev
Your 1
deal e]
s" .on
Code

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2001:09:14 11:10:52-04:00
Author                          : Alps Automotive, Inc.
Create Date                     : 2001:09:14 11:10:41
Creator                         : Microsoft Word 9.0
Page Count                      : 7
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools