ALPS ALPINE WB1U343 Auto Security Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	228598
Application ID	cIm3pB/kOIVCucCqT/wOaQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39kB (487516 bits)
Date Submitted	2002-03-01 00:00:00
Date Available	2002-03-01 00:00:00
Creation Date	2002-02-28 17:02:23
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual
Document Creator	User Manual - Microsoft Word

7. Insert the shade into the side mounting brackets and check to make
sure that it operates properly
Cargo utility hooks (Sedan)
The utility hooks located in side the trunk can be used to hang small
items on. Do not hang more than 12 kg (20 lbs) on the hooks. The hooks
are not designed to restrain objects during a collision.
REMOTE ENTRY SYSTEM (IF EQUIPPED)
The remote entry system allows you to look or unlock all vehicle doors,
trunk and liftgate without a key.
The remote entry features only operate with the vehicle in P (Park) or N
(Neutral) and the ignition in the, ACC, OFF or ON positions
If there is any potential remote keyless entry problem with your vehicle, .
ensure ALL key fobs (remote entrv transmitters) are brought to the
dealership, to aid in troubleshooting.
Unlocking the doors/litigate d“
Press this control to unlock the
driver’s door. The interior lamps will
illuminate with the ignition OFF.
Press the control a second time
within three seconds to unlock all
doors and lil'tgate (Wagons).
66
Locking 1
Press this
and liftgal
To roniirr
lurked, 1)!
time with”
lom's will
will chirp
Ll any of l
ajul: the l
alums, re
close all (
Unlockin
Press the
Iill gate/tr
Soundln
Press this
alarm.
To deacti
tontrol 3
ACC or (
This deVi
the FCC
Industry
subject t
conditior
cause ha
interfere
Operatic]
oak :
it} is
ml”,
e h: LkS
dot: \
rklvih'
vehi‘ in
) Llu
3 Locking the doors/Ilftgate (9
‘ Press this control to lock all doors
and liftgate (wagons).
To confirm all doors are closed and
locked, press the control a second
time within three seconds. The
doors will lock again and the horn
will chirp.
if any of the doors or liftgate are
ajar, the horn will make two quick
chirps, reminding you to properly
close all doors
Unlocking the litigate/trunk
Press the control to unlock the
liftgate/tmnk,
Sounding a panic alarm ‘3
Press this control to activate the
alarm,
To deactivate the alarm, press the
Control again or turn the ignition to
ACC or ON.
This device complies with part 15 of
the FCC rules and width RS-ZlO of
industry Canada. Operation is
subject to the foliovm'ng, two
conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
Operation.
67
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Illuminated entry
The interior lamps illuminate when the remote entry system is used to
unlock the door(s).
The system automatically turns off after 25 seconds or when the ignition
is tumed to the ON or ACC position. The dome lamp control (if
equipped) must not be set to the OFF position for the illuminated entry
system to operate.
The inside lights will not turn off if:
t they have been turned on with the dimmer control or
- any door is open.
The battery saver will shut off the interior lamps 10 minutes after the
ignition has been turned to the OFF position.
Replacing lost transmitters
If a remote transmitter has been lost
and you would like to remove it
from the vehicle’s memory, or you
would like to purchase additional
remote transmitters and have them
programmed to your vehicle:
- Take all your vehicle‘s
transmitters to your dealer [or
programming, or
0 Perform the programming
procedure yourself
Programming remote transmitters
It is necessary to have all (maximum of four — original and/or new) of
your remote transmitters available prior to beginning this procedure.
To PYOE
- Placr
turn
and
MOI
eucc
with
4 (C
lock
DYOE
- Witl
butt
rem
pas:
mot
0 Rep
The
l bee
' - Vh
the
loci
Repli
The r
batter
he up
opera
- we
' 0 net
0 str
0 Qt]
;ed to
ignition
ad entry
‘,l" the
new) ”1
dure.
To program the transmitters yourself:
. Place the key in the ignition and
tum from 2 (LOCK) to 3 (OFF)
and cycle between 3 (OFF) and
4(ON) eight times in rapid
succession (within 10 seconds)
with the eighth tum ending in the
4 (ON) position. The doors will
lock/unlock to confirm that
programming mode has been entered.
- Within 20 seconds, program a remote transmitter by pressing any
button on a transmitter. The doors will lock/unlock to confirm that the
remote transmitter has been programmed. (If more than 20 seconds
pass before pressing a remote transmitter button, the programing
mode will exit and the procedure will have to be repeated.)
0 Repeat the previous step to program additional remote transmitters.
The doors will lock/unlock to confirm that each remote transmitter has
been programmed.
- When you have completed programming the remote transmitters, turn
the ignition to 3 (OFF) or wait 20 seconds. Again the doors wlll
lock/unlock to confirm programming has been completed.
Replacing the battery
The remote transmitter is powered by one coin type three-volt lithium
battery CRZOSZ or equivalent. Typical operating range will allow you to
be up to 10 meters (33 feet) away from your vehicle. A decrease in
operating range can be caused by:
0 weather conditions
' nearby radio towers
0 structures around the Vehicle
0 other vehicles parked next to the vehicle
69
To replace the battery:
1. Twist a thin coin between the two
halves of the transmitter near the
key ring. DO NOT TAKE THE
FRONT PART OF THE
TRANSMITTER APART.
2. Place the positive (+) side of new
battery in the same orientation.
Refer to the diagram inside the
transmitter unit.
3, Snap the two halves back
together.
Replacement of the battery will not cause the remote transmitter to
become deprogrammed from your vehicle. The remote transmitter should
operate normally after battery replacement.
PERIMETER ALARM SYSTEM (IF EQUIPPED)
The perimeter anti-theft system will help prevent your vehicle from
unauthorized entry.
If there is any potential perimeter anti—theft problem with your vehicle,
ensure ALL key fobs (remote entry transmitters) are brought to the
dealership, to aid in troubleshooting.
Arming the system
When armed, this system will help protect your vehicle from
unauthorized entry. When unauthorized entry occurs, the system will
flash the headlamps and/or parking lamps, and will chirp the horn
The system is ready to arm whenever the key is removed from the
ignition. Any of the following actions will prearm the alarm system:
70
- Press
keyles
time t
opene
- Open
There is
before t}
Each dot
door/hoe
ai med.
When yo
twice wit
remote G
will chir;
all doors.
are close
If the do
remote e
will chin
Open.
er to
er should
‘om
lehicle.
.0 the
- Press the remote entry lock
control (doors opened or closed).
a Press 7/8 and 9/0 controls on the
keyless entry pad at the same
time to lock the doors (doors
opened or closed).
0 Open a door and press the power door lock control to lock the doors.
There is a 20 second countdown when any of the above actions occur
before the vehicle becomes ARMED.
Each door/hood or liftgate (wagon) arm individually, and if any
door/hood or liftgate (wagon) is open, then it must be closed for it to be
armed.
When you press the lock control
twice within three seconds on your
remote entry transmitter, the hom
will chirp once to let you know that
all doors/hood and liftgate (wagon)
are closed,
If the doors/hood or liftgate (wagon) are not closed and you press the
remote entry transmitter twice to confirm the doors are locked, the horn
will chirp twice to warn you that a door/hood or liftgate (wagon) is still
Open
71
Disarming the system
You can disarm the system by any
- Unlock the doors by using your
remote entry transmitter.
of the following actions:
0 Unlock the doors by using your
keyless entry pad,
0 Unlock the doors or liftgate with a key. Turn the key full travel
(toward the front of the vehicle) to make sure the alarm disarms
0 Turn ignition to ONA
- Press the PANIC control on the
remote entry transmitter. This
will only shut the horn OFF when
the alarm ls sounding. The alarm
system will still be armed.
Triggering the anti-theft system
The armed system Will be triggered if:
0 Any door, liftgate or hood is 0
remote entry transmitter.
0 The trunk is forced opened.
pened without using the door key or the
72
KEY
With
can:
o In
or
c O}
1 ar
> See:
chap
Your
entq
(rude
The
. on
o ta]
- or
Whei
midd
Prog
1. En
2. PH
secor
3, En
Enter
of the
Do nr
three
prese
Thiev
Your 1
deal e]
sr ;on
code

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 7
Creator                         : User Manual - Microsoft Word
Create Date                     : 2002:02:28 17:02:23
Title                           : User Manual
Producer                        : Acrobat PDFWriter 4.05 for Windows

EXIF Metadata provided by EXIF.tools