ALPS ALPINE WB1U443 Remote Control for the Vehicle User Manual

Download:
Mirror Download [FCC.gov]
Document ID	985535
Application ID	BeTFlv7z56XeNfITXRlKSw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.19kB (77347 bits)
Date Submitted	2008-08-15 00:00:00
Date Available	2008-08-15 00:00:00
Creation Date	2008-08-05 21:17:16
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2008-08-05 21:17:16
Document Title	(Microsoft Word - \203\206\201[\203U\201[\203Y\203}\203j\203\205\203A\203\2131.doc)
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	ALJP3D000259

HOW TO USE REMOTE KEYLESS ENTRY SYSTEM WITH IGNITION KEY REMOVED
LOCKING DOORS
1. Close all doors.
2. Push the lock button on the remote controller.
3. All doors will lock.
4. The hazard indicator flashes twice.
・ When the lock button is pushed with all doors locked, the hazard indicator flashes
twice as a reminder that the doors are already locked.
UNLOCKING DOORS
1. Push the unlock button on the remote controller.
2. Only the driver side door will unlock. Push the unlock button on the remote controller again
within 3 seconds.
3. All doors will unlock.
4. The interior light will stay on for 30 seconds.
The interior light can be turned off without waiting for 30 seconds by inserting the
key into the ignition or by locking the doors with the remote controller.
OPENING THE DRIVER'S AND PASSENGER'S WINDOW
1. Push the unlock button on the remote controller for longer than 1.5 seconds after
all doors are unlocked.
2. The driver’s and passenger’s window will open.
The driver’s and passenger’s window cannot be closed by using the remote controller.
RELEASING THE TRUNK LID
1. Push the trunk lid release button for longer than 1.0 second.
2. The trunk lid will open.
The trunk will not open with the trunk lid release cancel switch to OFF.
USING THE PANIC ALARM
If you are near your vehicle and feel threatened, you may activate the alarm to call attention
as follows:
1. Push the panic button on the remote controller for longer than 1.5 seconds.
2. The theft warning alarm and headlight will stay on for 30 seconds.
3. The alarm will stop when any of the key functions are used.
BATTERY REPLACEMENT
Replace the battery as follows;
1. Open the lid using a suitable tool.
2. Replace the battery with a new one.
Recommended battery: Sanyo CR2025 or equivalent
3. Close the lid securely.
4. Press the key button two or three times to check its operation.
If the battery is removed for any reason other than replacement, perform step 4 above.
・ An improperly disposed battery can harm the environment. Always confirm local
regulations for battery disposal.
・ The remote controller is water-proof; however, if it does get wet, immediately wipe
completely dry.
・ The operational range of the remote controller extends to approximately 49 it (15 m)
from the vehicle.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 3
Producer                        : AFPL Ghostscript 8.54
Create Date                     : 2008:08:05 21:17:16
Modify Date                     : 2008:08:05 21:17:16
Title                           : (Microsoft Word - \203\206\201[\203U\201[\203Y\203}\203j\203\205\203A\203\2131.doc)
Creator                         : PrimoPDF http://www.primopdf.com
Author                          : ALJP3D000259

EXIF Metadata provided by EXIF.tools