ALPS ALPINE WC1U241 Receiver for Vehicle Entry/Monitoring System User Manual

Alps Electric Co., Ltd. Receiver for Vehicle Entry/Monitoring System Users Manual

Users Manual

Download: ALPS ALPINE WC1U241 Receiver for Vehicle Entry/Monitoring System User Manual
Mirror Download [FCC.gov]ALPS ALPINE WC1U241 Receiver for Vehicle Entry/Monitoring System User Manual
Document ID605321
Application IDB9i/Rn2/3IcaE8tg9vu6PA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.07kB (38378 bits)
Date Submitted2005-11-23 00:00:00
Date Available2005-11-23 00:00:00
Creation Date2005-11-07 15:24:50
Document Lastmod0000-00-00 00:00:00
Document TitleUsers Manual
Document CreatorRST3.5.6.1

ALPS.
User’s Manual
MODEL No.1 TWC1U241
The radio frequency keyless entry-TPMS system has the following functions.
1. Locking and unlocking the doors without mechanical key.
2. Sounding a panic alarm during vehicle is not running.
3. Tire-pressure data monitor by receiving RF signal from RF transmitter in
tires during vehicle is running.
This system consists of RF Tuner, transmitters, and BCM.
The RF Tuner (EUT) is supplied BV from BCM. It is designed to operate on
a single fixed frequency RF 315MHZ by amplitude modulation. It receives
unique identification code and function code transmitted from transmitters.
After receiving RF signal, demodulation lC in Tuner demodulates RF signal
from transmitters. And then driving circuit in Tuner outputs the
demodulated signal to BCM.
ALPS.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measuresi
‘Reorient or relocate the receiving antenna
'Increase the separation between the equipment and receiver.
“Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
“Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Creator                         : RST3.5.6.1
Create Date                     : 2005:11:07 15:24:50
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CWTWC1U241

Navigation menu