ALTEC LANSING Speakers Manual L0806638
Altec Speaker Speaker System L0806638
User Manual: ALTEC ALTEC LANSING Speakers Manual ALTEC LANSING Speakers Owner's Manual, ALTEC LANSING Speakers installation guides
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
_®
ALTEC
LANS
User's guide
ING
°
CAUTION
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the
Caution: To prevent the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
The exclamation
point within an equilateral triangle
is
intended to alert the user to the presence of important
operating and maintenance
(servicing) instructions
in
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
the literature
I
CAUTION
To prevent electric shock do not use this (polarized)
plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure.
I
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
WARNING
RAIN
OR MOISTURE.
CONNECTING
Snap
plug
THE
into
POWER
power
RECHARGEABLE
supply
(AC
CORD
and then
insert
WALL
the
blades
outlet.
YEAR
LIMITED
WARRANTY
type.
if battery
Do not
The batteQ/used
is incorrectly
in this product
3.7V
heat
Capacity:
Replace
only with
such as sunshine,
must be recycled
removing the battery can be found in the
center for proper handling
of the battery.
Rated voltage:
replaced.
expose to excessive
or properly
"Power"
2150mAh
section.
THE
EUROPEAN
UNION
that its products
stated below.
AND
ASIA)
shall be free from
so the
above
limitation
may not
apply
to you.
What Does The Warranty
Not Cover?: This warranty
does not cover any defect, malfunction
or
failure that occurs as a result of: improper
installation;
misuse or failure to follow the product
limitation
or exclusion
may not apply
like.
of. Instructions
Please contact
your
to you.
The Problem?: Altec
Lansing
will, at its option,
repair
or
replace any product that proves to be defective
in material or workmanship.
If your product is
no longer being manufactured,
or is out of stock, at its option, Altec Lansing may replace your
product with a similar or better Altec Lansing product.
the same or
fire, or the
disposed
Type number:
WARRANTY
IN
What Is The Period Of Coverage?: For units purchased in European Union or Asia, this
warranty
runs for two years from the date of purchase. For units not purchased
in Europe or
Asia, this warranty
runs for one year from the date of purchase. The term of any warranties
implied by law shall expire when your limited warranty
expires. Some states and/or Member
States in the European Union do not allow limitations
on how long an implied warranty
lasts,
What Will Alte¢ Lansing Do To Correct
of explosion
equivalent
ONE
LIMITED
What Does The Warranty Cover?: Altec Lansing warrants
defects in materials or workmanship,
with the exceptions
above
BATTERY
CAUTION
Danger
LANSING
(Two=YEAR
the appliance.
directions;
abuse; or use with improper,
unintended
or faulty equipment.
(For information
on
proper installation,
operation
and use consult the manual supplied with the product. If you
require a replacement
manual, you may download
a manual from www.alteelansing.eom.)
Also, consequential
and incidental
damages are not recoverable
under this warranty. Some
states do not allow the exclusion or limitation
of incidental
or consequential
damages, so the
OUTLET)
into the
I
I
ALTEC
accompanying
for
local recycling
NTA2455
How To Get Warranty
Service: To get a covered product repaired
or replaced, you must contact
Altec Lansing during the warranty
period by email (csupport@alteclansing.com).
You must
include in your email, your name, address, email address, telephone
number, date of purchase
and a complete
description
of the problem
you are experiencing.
In the United States, you may
Read these instructions.
alternatively
contact Altec Lansing by telephone
at 1-800-ALTEC88 -- please be prepared to
provide the same information.
If the problem appears to be related to a defect in material or
workmanship,
Altec Lansing will provide you a return authorization
and instructions
for return
shipment.
Return shipments shall be at the customer's expense, and the return must be
accompanied
by the original
proof of purchase. You should insure the shipment
as appropriate
2.
Keep these instructions.
because
3.
Heed
4.
Follow
5.
Do not use this apparatus
near water -- This apparatus shall not be exposed
or splashing, and no objects filled with liquids, such as vases, shall be placed
How Will State Law Affect Your Rights?: This warranty
gives you specific legal rights, and
you may also have other rights which vary from state to state. Please note that in the
European Union, you as a consumer might have other legal rights under national
legislation
of
European Union Member States governing
the sale of Altec Lansing's goods. Those rights are
IMPORTANT
1.
SAFETY
INSTRUCTIONS
all warnings.
all instructions.
to dripping
on the
apparatus.
6.
Clean only with
dry cloth.
7.
Do not block any ventilation
openings.
Install in accordance with the manufacturer's
instructions.
The apparatus
should not be situated on a bed, sofa, rug or similar surface
that may block the ventilation
openings. The apparatus
must not be placed in a builtdn
installation,
such as a closed bookcase or cabinet that may impede the flow of air
through
the ventilation
openings. Ventilation
should
openings with items such as newspapers,
tablecloths,
8.
Do not install near any heat sources such as radiators,
apparatus
(including
amplifiers)
that produce heat.
9.
No naked
10.
flame
Do not defeat
sources,
the
such as lighted
safety purpose
candles,
of the
polarized
not be impeded
curtains, etc.
should
heat
registers,
be placed
by covering
the
stoves, or other
on the apparatus.
or grounding-type
plug.
A polarized
plug has two blades with one wider than the other. A grounding
type plug has two
blades and a third grounding
prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
the replacement
of the obsolete outlet.
you are responsible
not affected
for
the product
until
limited
purchaser,
if, and to the extent,
CUSTOMER
warranties
and remedies
valid
are sole warranties
and enforceable
need, please
your retailer
call our customer service team for
under their return policy.
assistance
Email:
to
before
returning
the speakers
to
csupport@alteclansing.com
If you live outside
select your region
of North America, please visit our website
to locate your country's distributor.
For the most up-to-date
information,
at www.alteclansing.com
and
be sure to check our Web site at www.alteclansing.com
INTERNATIONAL
International
customers:
For information
regarding
in your country, please visit www.altedansing.com
Power source -- Use only power supplies of the type specified in the operating
instructions
or as marked on the appliance.
If a separate
power supply is included with
this apparatus, do not substitute
with any other power supply -- use only manufacturer-
DISPOSAL
DISTRIBUTION
OF OLD
ELECTRICAL
the distribution
of Altec Lansing
and click on your region.
& ELECTRONIC
products
EQUIPMENT
supplies.
14.
Unplug
15.
Refer all servicing to qualified
service personnel.
Servicing is required when the apparatus
has been damaged
in any way, such as power-supply
cord or plug is damaged,
liquid has
been spilled or objects have fallen into the apparatus,
the apparatus
has been exposed to
rain or moisture, does not operate normally,
or has been dropped. For service, refer to
apparatus
qualified
service
assistance.
available
law.
Tel: 800-258-3288
Do not install in an area which impedes the access to the power plug. Disconnecting
the
power plug is the only way to completely
remove power to the product and must be
readily accessible at all times.
this
and remedies
the applicable
The answers to most setup and performance
questions can be found in the Troubleshooting
guide. You can also consult the FAQs in the customer support section of our Web site at
www.alteclansing.com
If you live in North America and still can't find the information
you
12.
power
under
SERVICE
Protect the power cord from being walked on or pinched -- particularly
at plugs,
convenience
receptacles, and the point where they exit from the apparatus.
provided
at Altec Lansing.
by this guarantee.
The above
11.
13.
it arrives
during
personnel,
lighming
return
incorporate
storms
or when
to the dealer;
batteries,
for long
or call the Altec Lansing
periods
service
16.
For products which
battery disposal.
17.
Only use attachmentdaccessories
18.
Use only with
thecart,
manufacturer
when moving
or sold with the apparatus. When a cart is used, use caution
the cart/apparatus
combination
to avoid iqjury from tip-over.
specified
stand, tripod,
please
unused
by the
bracket,
refer to local regulations
manufacturer.
or table
specified
bythe
for
of time.
line for
proper
be treated as household
waste. Instead it shall be handed over to the applicable
This symbol on the product or on its packaging
indicates that this product shall not
collection
point for the recycling of electrical and electronic
equipment.
By ensuring
this product is disposed of correctly, you will help prevent potential
negative
consequences
for the environment
and human health, which could otherwise
be
caused by inappropriate
waste handling of this product.
The recycling of materials will help to
conserve natural resources. For more detailed information
about recycling of this product,
please contact your local city office or your household
waste disposal service.
INMOTION
DIGITAL
After this connection
into a wall outlet.
IM600
SPEAKER
SYSTEM
THE NEW STANDARD
FROM
THAT SET THE STANDARD
THE
FOR
IPOD
_
COMPANY
Thank you for purchasing the Altec Lansing iM600
digital speaker system for iPod. When Altec Lansing
introduced the original inMotion, it set new standards
for sound and size and let a whole lot of music out of
the iPod. Today, the new iM600 raises the bar again
with an innovative and performanceqeading
design.
I I{O)_4[O[O]#JIII ll#JII_I
• inMotion iM600 mobile speaker system
• Wireless remote
is made, insert the power supply
DO (Battery) Power
The inMotion iM600 features
Lithium-ion battery.
a built-in
rechargeable
Charging time
up to 3 hours
Continuous
up to 5 hours
Playing Time
Charging the rechargeable battery:
The battery should be fully charged before
initial use.
To recharge the battery, insert the barrel connector
from the power supply into the DC connector on the
rear of the inMotion iM600. After this connection is
made, insert the power supply into a wall outlet. The
indicator light turns on. When the battery is fully
recharged, the indicator light turns off.
•
Power supply
•
User's guide and quick connect instructions
When the battery icon on the LCD screen displays a
single segment the battery should be recharged.
When the icon starts flashing, the iM600 is about to
shut down.
•
iPod touch
Warning: During the recharging process it is typical for
the battery to become warm. To be safe, keep
flammable materials away from the inMotion iM600.
•
iPod classic
•
iPod with video
•
iPod nano (3rd generation)
•
iPod nano (2nd generation)
•
iPod nano (1st generation)
2. Open the inMotion iM600 by pressing the button
the front of the speaker system.
•
•
iPod with color display
iPod mini
3. Remove the rechargeable battery
by removing the 2 screws.
•
iPod with dock connector
4. Unplug the battery and remove it.
I ',iII-_TI! I _,till
Note: To conserve battery
iM600 volume level.
Disconnecting the rechargeable battery:
1. Unplug the inMotion iM600 from the wall outlet.
I I 111lili _ tOIl I tO] _,ii _ I[i[i_
Alternate
i l I _!k"_ (OIl II (O)_I _lFtTi_
audio
sources--such
as non-dockable
iPod models, CD players, MP3 players, portable
DVD
players, and laptops--can
also be connected
to the
inMotion
iM600. For more information,
see the
"Connecting
to alternate
Use one of the following
inMotion iM600:
AC (Wall outlet)
audio
cover
source"
1. Turn on your iPod.
2. Turn on the inMotion
button. The indicator
iM600 by pushing the
light turns on.
3. Press the SOURCE button
the LCD screen.
Dock your iPod by sliding your iPod on top of the iM600
docking
station.
If necessary, first install the docking
adapter that came with your iPod. While the docking
adapter
is not required
for proper functioning
of your
iPod and iM600, it will provide a better fit.
Note:
compartment
on
kllW-I_'il
i I',I
Ir_-Yl
I_[II
Open the inMotion iM600 by pressing the button on
the front of the speaker system. Position the inMotion
iM600 on a level surface, preferably close to you (within
three feet).
V:!,,I,1_1_I "! I I_,[lll
power, reduce the inMotion
section.
two options to power your
Power
Insert the barrel connector from the power supply into
the DC connector on the rear of the inMotion iM600.
until "iPod"
is displayed on
Note: To avoid hearing a popping sound when you turn
on your inMotion iM600, always turn on your audio
source first.
Turn off the inMotion iM600 by pushing the (!) button.
The indicator light shuts off.
F_-I
lJ lifO]
hl; |III| lllO_l,vlVll
_I
During battery-only
operation
the inMotion
iM600
automatically
shuts down if no audio is detected
for
four minutes.
Press the d) button to turn the inMotion
iM600 back on.
NOTE: The Auto Shut-down
feature
is active during
battery-only
operation.
If the AC wall adapter
is used,
the inMotion
iM600 will remain on until the _ button
is pushed
and the indicator
light
shuts off.
The inMotion
Activate
iM600 features a built-in
FM radio.
the FM radio mode:
Press the SOURCE button
LCD screen.
until "FM" is displayed on the
Scanning FM radio stations:
Press and hold the (_ or (_ buttons
stations in an incremental manner.
to scan radio
Note: When the reception level of the FM station is
strong enough for stereo reception, the FM stereo
indicator on the LCD screen will illuminate.
Programming FM radio stations:
To program FM radio stations into the wireless remote,
follow the steps below:
1. Press the SOURCE button
the LCD screen.
until "FM" is displayed on
2. Use the (_ and (_ buttons
be preset.
to tune in the station to
Once an FM radio station has been programmed, simply
press the appropriate preset button [P1, P2, P3, P4] to
select it.
Note: To re-program a station in the inMotion
memory, simply repeat steps 1-3.
iM600
|eJ_,[lli{o}_,l
The inMotion iM600 is compatible with your iPod
device's alarm clock feature. To use your iPod and the
inMotion iM600 as an alarm clock, follow the steps
below:
1. Activate the alarm clock feature on your iPod (for
more information,
consult your iPod user's guide.)
2. Dock your iPod in the inMotion
3. Make sure the inMotion
wall outlet.
4. Turn on the inMotion
button. The indicator
iM600.
iM600 is plugged
into a
iM600 by pushing the
light turns on.
5. Press the SOURCE button
the LCD screen.
until "iPod"
6. Use the '%" and "-" buttons
to set the master volume.
1. Locate a 3.5 mm stereo cable (sold separately).
2. Connect one end of the 3.5 mm stereo cable into
the auxiliary input,jack (AUX) located on the back
of the inMotion iM600 system, and the other end
to the headphone or line out,jack on your alternate
audio device.
3. Press the SOURCE button
the LCD screen.
until "AUX"
is displayed on
on the inMotion
iM600
Note: For the alarm clock function to work properly, the
inMotion iM600 must be plugged in to a wall outlet.
The inMotion iM600 will otherwise automatically shut
down if no audio is detected for four minutes.
is displayed on
4. Set the volume on the audio source at mid-level.
5. Set the volume on the inMotion
level and adjust to a comfortable
3. To program the station in the inMotion iM600
memory, press and hold for 3 seconds one of the
preset buttons [P1, P2, P3, P4] on the wireless
remote. The LCD will display the preset number
together with the word "SAVED" when a station has
been successfully programmed.
IP':_llr*.1
_'|_ I [lll[O[ll[41
The inMotion iM600 system includes an auxiliary input
jack that allows you to connect to alternate audio
sources, such as non-dockable iPod models, CD players,
MP3 players, portable DVD players, and laptops. To
connect the iM600 to an alternate audio source, follow
the steps below.
iM600 at minimum
listening
level.
kV£O}ILIJ_ I H
The "+" and "-'" buttons control the master volume.
Press and hold the '%" button to increase the volume
and the "-'" button to decrease the volume.
FOR ADDITIONAL
BASS
The inMotion iM600 is equipped with a subwoofer
out jack ("SUB OUT"). This output should only be
used to connect an Altec Lansing optional subwoofer
specifically designed to increase the bass output of this
speaker system. Please check www.alteclansing.com
for
availability information.
fillUtTo]eJz)III_ 8 [oIo]l UO_[e)
lw_
The
rechargeable
battery
won't
charge and
no power
indicator
light is
on (AC
operation).
J g m] Ill _,,lu lJ LIWJ
I1 m _Uk_
The surge protector
powered on.
l_h
(if used) isn't
R ui
IIII L_J
Ih,.
If the power supply cord is plugged into a surge
protector, make sure the surge protector is switched on.
The wall outlet is not functioning.
Plug another device into the same wall outlet to
confirm the outlet is working.
The power
Turn on the inMotion iM600 by pushing the _) button.
The indicator light turns on.
isn't turned
on.
No Power
indicator
light is on
(Battery
operation).
The rechargeable
charged,
No sound is
The volume is set too low.
The power
battery
isn't turned
isn't
on.
Recharge the battery
details.)
(see the "Power"
section for
Turn on the inMotion iM600 by pushing the (n)button.
The indicator light turns on.
The "+" and "-" buttons control the master volume.
Press and hold the "+" button to increase the volume.
coming from
speakers.
Check the volume level on alternate
device and set at midqevel.
audio source
An incorrect source has been selected.
Press the SOURCE button until the appropriate
is displayed on the LCD screen.
The iPod is not correctly seated into
the docking station,
Turn off the iPod, remove it from the docking station,
reseat it, and turn it on again.
If using an alternate audio source, the
audio source is not properly connected
to the inMotion iM600 or there is a
problem
source.
with the alternate
audio
Connect an alternate
audio source--such
source
as a CD
player, MP3 player, or portable DVD player--to your
inMotion iM600 by plugging one end of a 3.5mm
stereo cable (sold separately) to the line out of your
portable device (if it has one) or to the device's
headphone jack. Connect the other end to the input
marked "AUX" on the back of the inMotion iM600.
Set the volume on the audio source at mid-level.
Set the volume on the inMotion iM600 at minimum
level and adjust upward
level.
to a comfortable
listening
Ib|
Ik;J
I _11 ILWJk_
There is a
crackling
sound
coming from
speakers.
I.W_'_'_]l
II o_l !
I_J iJ i,IwJ
Ill III m4k_
_WJRWJWL_JL
The iPod is not correctly seated into
the docking station.
Turn off the iPod, remove it from the docking station,
reseat it, and turn it on again.
If using an alternate audio source, the
audio source is not properly connected
to the inMotion iM600 or there is a
• Connect an alternate
problem
source.
with the alternate
audio
audio source--such
player, MP3 player, or portable DVD player--to your
inMotion iM600 by plugging one end of a 3.5mm
stereo cable (sold separately) to the line out of your
portable device (if it has one) or to the device's
headphone jack. Connect the other end to the input
marked "AUX" on the back of the inMotion iM600.
• Set the volume on the audio source at midqevel.
• Set the volume on the inMotion iM600 at minimum
level and adjust upward
level.
There is a
as a CD
to a comfortable
listening
The operating
set too high.
system's volume level is
Check the operating
it if necessary.
The sound
The inMotion
iM600's volume level is
The "+" and "-"
is distorted,
set too high.
Press and hold the "-"
There is
radio
interference.
The unit is too close to a radio tower.
Move the unit to see if the interference
Intermittent
buzzing,
The unit is located too close to a GSM
cell phone.
Move the GSM cell phone away from the unit.
The
inMotion
iM600
exhibits
erratic or
Static electricity, momentary
interruption
of power, or abnormal
operating conditions may be
responsible.
1. Disconnect the power supply from the wall outlet.
2. Disconnect the rechargeable battery per instructions
in the "Power" section.
3. Wait 20-30 seconds.
crackling
sound
system volume level and decrease
coming from
speakers
(when
connected
to PC or
laptop).
unexpected
behavior.
Controls do
not function.
buttons control
the master volume.
button to decrease the volume.
4. Reconnect the rechargeable battery.
5. Reconnect the power supply.
goes away.
ALTEC
LANSING
This Class B digital apparatus complies with Canadian ICES003 • Cet appareillage digital de Classe B est conforme au ICES003 canadien
'Made for iPod' means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards
Patents pending
_) 2007 Plantronics Inc All rights reserved
Altec Altec Lansing, inMotion the Altec Lansing inMotion logo SFX and the SFXlogo are registered trademarks or trademarks of Altec Lansing
Plantronics the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics Inc
iPod is a trademark of Apple Inc registered in the US and other countries
All other trademarks appearing herein are the property of their respective owners
Designed byAltec Lansing in the USA Made in China
CORPORATE
HEADQUARTERS
535 Rte 6 & 209 Milford PA 18337 0277 USA * 86&570 5702 * 570 29&4434 * Fax 57&296 6887
Designed in USA Made in China
A12118
ROT
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Wed Jul 02 04:15:21 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools