ANLEON Electronic MTG-100 Wireless acoustic Transmission System User Manual
Shenzhen ANLEON Electronic Co.,LTD Wireless acoustic Transmission System Users Manual
Users Manual
ANLEON Wireless Acoustic Transmission System
Components
① MIC socket: input MIC or AUX signal (the signal input mode selection switch⑥ should
match with the input signal)
② Power button: long press to turn on/off, short press for mute/speak
③ Power indicator: when the transmitter is turned on, the indicator is green. When it is in mute
state, the indicator is flickering green. When it is at low power, the indicator is flickering red,
please replace the battery timely
④ Antenna: 1/4 wave whip antenna
⑤ LCD panel: indicates the current working channel and battery power level
⑥ Signal input mode selection switch: shift the switch to "AUX" for line input mode and shift the
switch to "MIC" for microphone input mode
⑦ Channel adjustment: short press "CH" button to shift to the needed channel, 6 channels for
option
⑧ Battery compartment: assemble 2pcs of AA batteries
Operating Instruction
1. Assemble the supplied batteries into the battery compartment and turn on the power, when the
indicator lights up, it means the transmitter is under normal working status.
2. Insert the microphone into MIC socket(switch signal input mode to "MIC"position)
3. Turn on the receiver after assembling the batteries, when the indicator lights up, it means the
receiver is under normal working status( adjust the CH button to match the channel with that of
the transmitter)
4. Insert the earphone into headphone sockets⑤ and adjust the volume to gain the satisfied sound
effect
Cautions
1. Keep the distance between vocal and mic as 60cm to avoid high voice
2. Make sure the batteries are assembled with correct polarity to avoid damage
3. This product has been modulated by accurate equipment, do not dismantle it by yourself to
avoid abnormal working
4. Do not use or store it under dusty, humid, high temperature and strong magnetic environment to
avoid lifetime influence
5. Use standard new battery, it may lead to chemical material leakage and damage the electronic
components if using inferior and low power battery
6. Take out the batteries when not using it for a long time
7. LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE.
USE AS LOW A VOLUME AS POSSIBLE.
Simple Trouble Shooting
Trouble Possible reason Method
The transmitter is not turned on Turn on the transmitter
The receiver is not turned on Turn on the receiver
Frequencies are not matched Adjust the CH
b
utton on the
receiver to match the channel
Receiver volume is too low Adjust the volume of the receiver
No sound
Battery power is low Replace with new battery
The power indicator does
not light
Battery is assembled oppositely Check if the battery is assembled
wrongly, reassemble it in the
right way
The receiver receives
other sound or
broadcasting
The working channel is close to other
frequency channel
Adjust a new channel for the
transmitter and the receiver
Specification
Frequency Range: UHF 650-680Mhz
Power Supply: DC 3V/2pcs AA 1.5V batteries
Operating Range: 50m (environment dependent)
Transmit Power: <10dBm
Operating Hours: 12Hours
Product Content
Transmitter 1pc
Receiver 1 pc
Headworn Microphone 1 pc
Earphone 1 pc
3.5mm-3.5mm Conversion Cable 1 pc
User Manual 1 pc
Application
Wireless tour guiding, simultaneous translation, audio-visual education