AOB ELECTRONICS ES52040BT Mini Speaker User Manual 52040manual

SHENZHEN AOB ELECTRONICS CO.,LTD Mini Speaker 52040manual

user manual

17493 MINI BLUETOOTH SPEAKER GB INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE
APPEARANCE AND CONTROLS Key operation Key function definition PACKAGE CONTENTS  Mini Bluetooth speaker  Auxiliary cable  USB cable  Instruction Manual INSTRUCTIONS 1. Turn on the speaker by sliding the ON/OFF switch (located on the bottom of the speaker) to the "On" position. The red LED indicator should be lit. 2. Connect to the "Audio-out port" on your computer, mobile phone or the earphone jack of other musical devices like disc man etc, using the provided auxiliary cable. 3. Using Bluetooth a) Turn on the speaker by sliding the ON/OFF switch to the “ ”, the LED of the speaker will flash blue, which indicates a searching status. b) Turn “ON” the Bluetooth option on your source device (mobile phones, laptop, tablet etc) to pair with the Bluetooth speaker. Input the password “0000” if necessary during pairing. c) Once the device is paired with the speaker, desired music can be played using the external (paired) device via Bluetooth through the speaker. d) If it still doesn’t work, please re-start the unit or turn off the Bluetooth, and follow the above steps again. 4. Volume can be controlled by adjusting the volume of your source device or computer. 5. Charge the speaker by connecting the provided USB cable to powered USB port on your computer. 6. The speaker takes 2-3 hours to get fully charged. Depending on the volume and the type of music played, each charge can last between 30-50 minutes. Note: Battery life may vary depending on volume, handling, control range etc. PRODUCT SPECIFICATIONS: Power output : 2.0W SNR : >85+2dB Speakers : (Dia.) 36mm (20Hz – 20KHz) Lithium battery input : 180mAH (DC5V) Dimension : (Dia.) 43mm (H) 50mm Material : ABS Case + Metal Net-cover Charging time : 2~3 hours Play time : 30-50 minutes
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Navigation menu