APEXIS ELECTRONIC APAHWFD2M WIFI Doorbell User Manual

SHENZHEN APEXIS ELECTRONIC CO., LTD. WIFI Doorbell

Users manual

Quick Installation GuideWIFI DoorbellModel No.: M806Thank you for choosing our product ! This quick Installation guide will help you install, setup and use your camera on Mobile Phone APP very easily and quickly.Download the App:Search and download the Free App in iOS Store or Google Play; The App name: Its Mycam; you can also scan below QRCode todownload:iOS:Google Play:A: Setup the camera: Wireless Connection1. Plug the power adapter for doorbell /camera and Place the doorbell /camera within 5 meters near to WIFI router.(Note: After power plugged ,you will hear 2 seconds ‘voice from doorbell /camera (if doorbell/camera support two way audio),which meansDoorbell/ cameras is ready to setup now, if not, please reset the cameras to factory default by pressing the Reset button about10seconds )2. Connect your mobile phone to the your home WIFI SSID you want setup to camera
3.RuntheApptoclick ‘AddCamera’ forsettingup ‘Wireless Connection’ Scan QRCode on the camera’s lable”Enter the camera name as your idea , the default password ”Input your home WIFI Password Finished setup.(If setup fails, Please back to first setting step on APP and check your WIFI password , reset the camera to factory setting by pressing thereset button of camera for 15 seconds, then try again)
FCC StatementChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for helpThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimumdistance 20cm between the radiator & your body.

Navigation menu