AQUATIC AV AQRFDM5D WATER/DUST PROOF MP3/IPOD DIGITAL MEDIA LOCKER User Manual DM 5 UBT IB 122813
AQUATIC AV WATER/DUST PROOF MP3/IPOD DIGITAL MEDIA LOCKER DM 5 UBT IB 122813
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2171835 |
| Application ID | JiuMHBtd6S0CROH/3xoclA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.81kB (560130 bits) |
| Date Submitted | 2014-01-21 00:00:00 |
| Date Available | 2014-01-21 00:00:00 |
| Creation Date | 2013-12-31 08:57:54 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2013-12-31 08:57:54 |
| Document Title | Microsoft Word - DM-5 UBT IB_122813 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | USER |
CONTENTS DIGITAL MEDIA LOCKER™ • AQ-DM-5UBT Digital Media Locker™ • 2-Way RF Wireless Remote Control (AQ-RFDM-5U) • 3.5mm to 3.5mm Jack Cable • Wiring Harness (AQ-UNH-2) optional • Six (6) Stainless Steel Mounting Screws • One (1) CR-2430 Battery • Mounting Template • Owner’s Manual AQ-DM-5UBT OWNERSMANUAL INSTALLATION 1. 12-pin Watertight Harness The 12-pin harness supplies power and ground connections to the Digital Media Locker and four (4) speaker channel output connections from the Digital Media Locker. Do not cut or modify the 12-pin harness on the Locker side or warranty will be void. 2. FM Radio Antenna Jack Connect antenna (AQ-ANT-1 sold separately) to female antenna receptacle. For best FM performance make sure the antenna is extended to the highest achievable position. 3. Auxiliary Outputs Allows external amplifiers to be connected to power additional speakers. 4. 12V DC External Trigger Allows for an external light or relay to be triggered (350mA max load). 5. Backlighting 12V DC input (orange) Allow to connect to an external 12V DC, light up LED backlight. DIGITAL MEDIA LOCKER™ 12-PIN HARNESS CONNECTION The AQ-DM-5UBT includes the universal harness AQ-UNH-2 in order to connect the dock to power and speakers. All open wire connections should be soldered and protected against water and dust for best long term performance. REMOTE BATTERY INSTALL Remove the RF Wireless Remote control from the Digital Media Locker. Unscrew the waterproof cap on the back of the remote control. Place the CR-2430 battery in the RF Remote control and replace the water/dust proof cap. POWER ON Press the on/off button. Standby will be indicated by a red LED and ON by a blue LED. For applications that require low current draw and where battery drain may occur, the power button must be turned OFF. When the power button is in the OFF position the red LED will not be lit. For applications where a 12V battery is not used, such as in a Spa, the power button can be left ON and the remote control can then be used to power on/off accordingly. REMOTE SYNCHRONZING 1. Turn the Digital Media Locker to standby with the power button inside the door. The LED should illuminated red. 2. Press the red( MOUNTING THE UNIT 1. Mounting templates is included. Aquatic AV recommends using the ‘measure twice, cut once’ method. 2. Once the mounting hole is complete, make sure the outside surface is clean and clear of debris. The Digital Media Locker has an external water/dust proof gasket, but this requires a clean surface for best performance. 3. The Digital Media Locker has six (6) front screws. Drive the screws using a screw driver. During final mounting apply equal pressure to all points for the best water/dust outer seal performance. 4. Review all outside surfaces of the Digital Media Locker to ensure proper water/dust seal. This is important for long term environmental protection performance for your digital media device. ) button on the remote. 3. Press and hold the( 4. Continue to press the( ) button until the LCD reads PAIR. ) button during step 5 below. 5. Turn the docking station stand by (within 10 seconds) with the on/off button inside door(the red LED will illuminate). 6. The remote’s LCD should read WELCOME or show a mode position such as RADIO, BT or AUX IN. For any additional remote controls, you will also need to activate/synchronize those remote controls by following the steps above. If the pairing process is not effective, switch the locker off using the on/off button located inside the door of the dock. Unplug the 12-pin Harness on the back of the Locker for 3minutes. Reattach the Harness and repeat steps 1-6 above. If the LCD displays “NO LINK” in either mode, this means the remote is out of reception range. Move the remote closer to the Locker and try again. If you lose your remote control and buy another new remote control, please follow the above to start pairing before normal usage. DIGITAL MEDIA LOCKER Buttons Music Mode FM Radio Mode Power Press once: Toggle from Operation mode to Standby mode or vice‐versa. Mode Press once: Change the source. Press once: Change the source Press once: Volume up Press once: Volume up Press and hold: Fast volume up Press and hold: Fast volume up Press once: Volume down Press once: Volume down Press and hold: Fast volume down Press and hold: Fast volume down Press once: Previous track Press once: Seek down Press and hold: Fast rewind Press and hold: Toggle manual scanning Volume up Volume Down ‐ Fast Rewind << Fast Press once: Next track Press once: Seek up Press and hold: Fast forward Press and hold: Toggle to manual scanning 12V Press once: Random playback function Press once: No function Trigger/random Press and hold: Toggle external 12V power on/off Press and hold: Toggle external 12V power Forward >> on/off 1. Digital Media Locker Open/Close Latch & Protective Door. 2. Power ON/OFF Button 3. Water/Dust Protection Inner Gasket 4. 3.5mm Aux Input for MP3 Devices 5. Power ON/OFF LED. 6. Security Strap for digital media devices. 7. Door Control Keypad. 8.LED Mode indicator. 9.Back lighting. DOOR CONTROL KEYPAD Play/pause Press once: Play/Pause Press once: Toggle mute 1/DIR‐ Press and hold: Play/Pause Press once: Back to previous folder Press and hold: Toggle mute Press once: Listen to FM preset station 1 Press and hold: Set preset FM station 1 2/REPEAT 3/DIR+ Press and hold: Back to previous folder Press once: Repeat function Press and hold: Repeat function Press once: Forward to next folder Press and hold: Forward to next folder Press once: Listen to FM preset station 2 Press and hold: Set preset FM station 2 Press once: Listen to FM preset station 3 Press and hold: Set preset FM station 3 The keypad on the door has a set of keys fewer than those on the remote but has exactly the same functions correspondingly. This keypad allows you to operate the dock even underno remote condition. REMOTE CONTROL If your music player is connected via the Auxiliary input you will not be able to control track or receive track information. In order to prolong remote battery life the LCD will shut off in 20 seconds if no other button is pressed. To turn remote back on press any key once and then press the command desired. Turn off DSP to access control of Bass and Treble ○ ○ Buttons Power Mode Music Mode FM Radio Mode Press once: Toggle from Operation mode to Standby mode or vice‐versa. Press once: Change the source. Press once: Change the source Press and hold: Pair Press and hold: Pair Audio Press once: Volume up Press and hold: Fast volume up Press once: Volume down Press and hold: Fast volume down Press once: Play/Pause Press and hold: Play/Pause Press once: Previous track Press and hold: Fast rewind Press once: Next track Press and hold: Fast forward Press once: Back to previous folder Press and hold: Back to previous folder Press once: BAS‐TRE‐BAL‐FAD‐DSP‐AREA USA‐LOUD‐DX‐STEREO‐BATT ON‐VOL Press and hold: BAS‐TRE‐BAL‐FAD‐DSP‐AREA USA‐LOUD‐DX‐STEREO‐BATT ON‐VOL Press once: Volume up Press and hold: Fast volume up Press once: Volume down Press and hold: Fast volume down Press once: Toggle mute Press and hold: Toggle mute Press once: Seek down Press and hold: Toggle manual scanning Press once: Seek up Press and hold: Toggle to manual scanning Press once: Listen to FM preset station 1 Press and hold: Set preset FM station 1 Press and hold: BAS‐TRE‐BAL‐FAD‐DSP ‐LOUD ‐BATT ON‐VOL Volume up Volume Down A. Remote Control LCD B. Remote Control keypad C. Battery Door ‐ Play/pause Fast Rewind Fast Forward 1/DIR‐ 2/REPEAT Press once: Repeat function Press and hold: Repeat function Press once: Listen to FM preset station 2 Press and hold: Set preset FM station 2 3/DIR+ Press once: Forward to next folder Press and hold: Forward to next folder Press once: Listen to FM preset station 3 Press and hold: Set preset FM station 3 Press once: Random playback function Press and hold: Toggle external 12V power on/off Press once: No function Press and hold: Toggle external 12V power on/off 12V trigger /random LISTENING VIA 3.5MM JACK PAIR WITH BLUETOOTH DEVICE 1. Power up the Digital Media Locker. 2. Attach your MP3 device to the 3.5mm connector. 3. Secure the device with the anchor straps provided. 4. Secure the Digital Media Locker’s protective door. 5. Press (Mode) on the remote control to select ‘AUX IN’ mode. 1. Switch on your Bluetooth device. 2. Select ‘AQUATIC AV’ from the list of available devices to pair (no password is needed). Only one Bluetooth device can be paired with the Digital Media Locker at any time. PLAY SONG FROM BLUETOOTH DEVICE ADJUST VOLUME LEVEL 1. Press + (VOLUME UP) once to increase the volume. 2. Press - (VOLUME DOWN) once to reduce the volume. 3. Press and hold either + or - and the Digital Media Locker will increase or decrease audio volume continuously. ENTER FM 1. Press( MODE) on remote control to switch to FM radio mode. RADIO MODE If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD. FM radio is only available when you are in the FM Radio mode. TO SCAN OR NAVIGATE CHANNELS 1. Press (FAST REWIND) or 2. Press and hold either or forward. FAST FORWARD) to seek another station. (FAST REWIND) or (FAST FORWARD) for manual tuning back SAVING RADIO CHANNEL TO MEMORY 1. If you want to save the current frequency into memory, press and hold, than 2 seconds. The station will be stored into relevant button. or for more LISTENING TO SAVED RADIO MEMORY 1. Press the, or button once to listen to the station stored in button. SWITCH BETWEEN US & EURO FM MODES 1. Make sure dock and remote are turned on and in ‘RADIO’ mode. 2.Press the AUDIO button 6 time in a row. 3. The remote will display ‘AREA USA’ or ‘AREA EUR’ depending on which tuning mode is currently selected. 4. Use the + & - buttons to switch between US or European modes. 5.Press( PLAY/PAUSE) to select the desired tuning mode. 6. Once you switch modes it will default to the FM station stored in ‘PRESET 1’. US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,88.7 MHz. EUR mode will increase and decrease the FM frequency in steps of 0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz. 1. Bluetooth mode will be activated once a Bluetooth device is linked. 2. Play the song from device and the sound will play through the Digital Media Locker. 3. Press for play/pause. 4. Press button to play previous/next song file. EXTERNAL TRIGGER TECHNICAL SPECIFICATIONS Aquatic AV understands the need for more flexible remote applications. With the Digital Media Locker Aquatic AV has provided an independent 12V ‘accessory’ trigger, activated from the RF wireless remote. This could activate any 12V based device like 12Vlights or surveillance camera. Media Supported media.......................................Bluetooth/iPod/ iPhone /MP3/FM Device control............................................via Door Controls & RF Remote Control 1. In any operational mode, press the(12V TRIGGER) key to activate. Press again to deactivate. Inputs Auxiliary.................................................... 1x 3.5mm Stereo Jack Socket Outputs Pre-Out......................................................1x Stereo pair RCA (4V P-P) FM Radio FM pre-sets............................................... 3 US/Euro frequencies................................. Yes Power Output voltage @ 2 Ohm.......................... 4x 72W Output voltage @ 4 Ohm.......................... 4x 45W Operation voltage......................................10.7V - 15.6V DC Max current draw...................................... 7A Standby current draw................................ 6mA Multi-environment Certifications Waterproof / Dustproof..............................Yes (IP65 Digital Media Locker™) Waterproof / Dustproof..............................Yes (IP66 Remote Control) Conformal PCB coating.............................Yes UV protection.............................................500 hours stable, ASTM D4329 compliant Salt/Fog protection.................................... 500 hours stable, ASTM B117 compliant Stainless Steel mountings.........................Yes 2. We strongly recommend you speak to our technical service staff or your dealer if you are considering using this feature. Load on External Trigger should not exceed 350mA. REMOTE CONTROL LCD AUTO OFF To maximize battery life of the Remote Control, the LCD will be OFF if no key is pressed for 20 seconds. To re-activate the LCD display, press any key once to bring the remote control to normal operation. DOCK LIGHT Plug the orange wire to the brown wire, use the trigger of the remote to toggle the dock light ON/OFF. DIMENSIONS Aquatic AV offers a limited warranty of our products on the following terms: Length of warranty 2 years on audio systems, electronics, speakers, and accessories (receipt required). Coverage This warranty covers only the original purchaser of a Aquatic AV product purchased from an authorized Aquatic AV dealer in the United States. In order to receive service, the purchaser must provide Aquatic AV with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase. Defective products Products found to be defective during the warranty period will be repaired or replaced(with a product deemed to be equivalent) at Aquatic AV’s discretion. What is not covered Damage caused by accident, abuse, improper operations, water, theft. Any cost or expense related to the removal or reinstallation of product. Service performed by anyone other than an authorized Aquatic AV service center. Any product with the serial number or tamper labels defaced, altered, or removed. Subsequent damage to other components. Any product not purchased from an authorized Aquatic AV dealer. Limit on implied warranties Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product. How to obtain service You must obtain a return material authorization number (RMA) to return any product to Aquatic AV. You are responsible for shipping charges of returned products to Aquatic AV. Please record the model and serial number[s] of your equipment in the space provided below as your permanent record and will assist us with your factory warranty coverage.These numbers can be found on the rear of the Digital Media Locker. Model number(s) Serial number(s) FCC ID: WBQAQRFDM5D MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. NOTE: The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : USER Create Date : 2013:12:31 08:57:54+08:00 Modify Date : 2013:12:31 08:57:54+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Microsoft Word - DM-5 UBT IB_122813 Creator : USER Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.5.5 (Windows) Document ID : uuid:180ec442-a768-4440-8f39-018e1cffe1aa Instance ID : uuid:d691a72c-dd3c-45b3-b872-1915588a9a96 Page Count : 9EXIF Metadata provided by EXIF.tools