AQUATIC AV AQRFDM6BU Multimedia Locker User Manual IB 6500 V0 1 20161203

AQUATIC AV Multimedia Locker IB 6500 V0 1 20161203

Contents

15_6500-915 UserMan.pdf

products with watertight reputation6500-915WATERPROOF MEDIA PLAYERfor Bluetooth MP3 devicesOWNER'S MANUALPLEASE READ THIS INSTRUCTION MANUAL BEFOREINSTLAATION AND OPERATION! !is a trademark of Jacuzzi Products CoBluetooth
1 Getting Started 1.1 Contents 1.2 Connections 1.3 12-pin Harness Connection1.4 Mounting the BlueCube Media Player1.5 Power On1.6 Handheld Remote Control Charging1.7 Handheld Remote Control Synchronizing2 Location of Controls 2.1 Wireless Handheld Remote Control2.2 Using Audio Menu on Handheld Remote Control2.3 Wired Remote Control 3. Listening to Devices 3.1 Listening via Bluetooth 3.1.1 Pairing with Bluetooth Device3.1.2 Listening via Bluetooth Device3.2 Listening via Auxillary Input3.3 Adjusting Volume Level4. Other Features4.1 Using VBass 4.2 External Trigger4.3 Pump Control 5. Specifications and Dimensions 4.1 Specifications 4.2 Dimensions 6. Warranty Information7. FCC Statements333445556 6667777777777888910Table of Contents Bluecube Media Player 6500-915www.aquaticav.com 2
Getting Started Bluecube Media Player 6500-915www.aquaticav.com 31.1 Contents 6500-915 BlueCube Media PlayerWiring Harness (AQ-UNH-2)Owner's Manual 1.2 Connections 1: 12-pin Watertight Harness The 12-pin harness supplies power and ground connection to the BlueCube Media Player and four (4) speaker channel output connections from the BlueCube Media Player. 2: Spa Controller This must be connected to the spa controller. 3: Subwoofer Output Connect to a subwoofer amplifier. 4: 3.5mm Auxiliary Input Connect to an audio source, such as MP3 player or other audio line out. 5: 8-pin DIN Cable for remotes Connect to optional wireless or wired Remote Control (sold separately). 6: EXT Trigger Provide 12Vdc when EXT trigger is pressed on remote control (sold separately).7: Power On LED When the BlueCube is powered On, the LED will lit. 8: Bluetooth Antenna ConnectionConnect to the Male SMA connector of the Bluetooth antenna. Do not apply excess torque to the SMA connector (no more than 0.5N-m). Use hands to tighten the connection. (No wrench is used) 12-pin Watertight Harness14568236Connect SPA controller (Black)Connect To Subwoofer (brown)3.5mm Female Auxiliary Input8-pin DIN cable for Remote (black)External Trigger (brown)Power On LED
Getting Started Bluecube Media Player 6500-915www.aquaticav.com 41.3 12-pin Harness ConnectionThe AQ-BC-6BT includes the universal harness AQ-UHN-2 in order to connect the BlueCube to power and speakers. All open wire connections should be soldered and protected against water and dust for best long term performance. Power Antenna (7)DC Ground (10)LR-(2) No connectionLR+(3)LF-(5)LF+(6)RF-(8)RF+(9)RR-(11)RR+(12)FUS E BOXLeft Rear Speaker+-Left Front Speaker+-+-+-Right Front SpeakerRight Rear SpeakerPlease put a fuse into the box(Blue color)(Green/strip)(Green color)(White/strip)(White color)(Gray/strip)(Gray color)(Purple color)(Purple/strip)(Black color)No lower than 2 Ohm load should be used or damage may occur to the BlueCube MediaPlayer. Make sure the polarity of speakrs areconnected correctly. (Yellow color)+12VDC(1)1.4 Mounting the BlueCube Media Player1. Make sure the outside surface is clean and clear of debris2. The BlueCube Media Player has four (4) front screws. Drive the screws using a screw driver. Make sure screws are snug and do not over tighten.
Getting Started Bluecube Media Player 6500-915www.aquaticav.com 51.5 Power OnThe stereo (6500-915) requires +12V dc to both the red and yellow wires. When both of these wires have power, the stereo is always powered on and is indicated by a red LED coming out of the heatsink of the stereo. Ground is connected to the Black wire. If the stereo is not connected to the same power supply, please make sure to switch ON the stereo (6500-915) before the spa controller is turned on. For detailed instructions, you can check out our online video: "How to wire your Aquatic AV stereo system"http://www.aquaticav.com/support/videos1.6 Handheld Remote Control Charging (AQ-DM-6UBT-T sold separately)The remote has a built-in Polymer Lithium rechargeable battery. It comes with a custom made charging cable. Connect one end to the blades of the remote control and another the other end to any USB female device (5V dc) for charging.Make sure the remote has been charged before used. 1.7 Handheld Remote Control Synchronizing (AQ-DM-6UBT-T sold separately)The remote has a receiver dongle (AQ-DM-6UBT-R) with a built-in male DIN connector. Connect the dongle to the female DIN connector of BlueCube Media Player (AQ-BC-6BT). The remote should already be paired from the factory, but if you need to synchronize the remote, follow below steps. 1. Make sure BlueCube Media Player (AQ-BC-6BT) is powered ON (red LED lit)2. Put the remote close to the dongle (AQ-DM-6UBT-R) (ideally within 0.5 meter) 2. Press and hold MODE until the LCD shows "Pairing in Progress". Release the button. 3. WIthin 2 seconds, the LCD will show "Paired". If it fails to pair, the LCD will show "Retry again". If this happens, wait 5 seconds and repeat the above procedures. For any additional remote controls, you will also need to synchroize those remote controls to the BlueCube Media Player (AQ-BC-6BT). If the pairing process is not successful, try again to put your remote close to the dongle.Depending on the frequency of usage, the remote might drain its battery. Please charge the remote before use. If the LCD shows nothing, it means that the battery has been drained. If you have lost your remote control and buy a new remote control, please follow the above steps to pair the remote control
Location of Controls Bluecube Media Player 6500-915www.aquaticav.com 62.1 Wireless Handheld Remote Control AQ-RF6UBT-T (sold separately) 231AUDIO AUDIO MODEMODEPAIRPAIRAUDIO AUDIO MODEMODEPAIRPAIRButtons AUX IN Mode Bluetooth ModePowerMode/PairVolume UpVolume Down23EXT TriggerAudioVBassFastForwardFastRewindPlay/Pause1123Press once: Toggle Operational mode to Standby mode or vice versaPress once: Change the sourcePress and hold: PairPress once: Volume upPress and hold: Fast volume upPress once: Volume downPress and hold: Fast volume downPress once: no functionPress and hold: no functionPress once: Next trackPress and hold: Fast ForwardPress once: no functionPress and hold: no functionPress once: Previous trackPress and hold: Fast backwardPress once: Toggle mutePress and hold: no functionPress once: Play/PausePress and hold: no functionPress once: Toggle Pump 1 on or offPress and hold: no functionPress once: Toggle Pump 2 on or offPress and hold: no functionPress once: Toggle Pump 3 on or offPress and hold: no functionPress once: Toggle EXT trigger ON (12V dc) or OFF Press and hold: no functionPress once: no function Press and hold: no functionPress once: Toggle VBass ON or OFFPress and hold: no function2.2 Wired Remote Control AQ-WR6 (sold separately) Coming Soon!AUDIO MENUShort press AUDIOBALANCE Use +/- to adjustFADERROCKBASS TREBLEShort press AUDIOUse +/- to adjustUse +/- to adjustCLASSICPOPUse +/- to adjustShort press AUDIOShort press AUDIOShort press AUDIOShort press AUDIOShort press AUDIO Long press AUDIOto save and exit Short press AUDIOLong press AUDIOto save and exit Long press AUDIOto save and exit Long press AUDIOto save and exit Long press AUDIOto save and exit Long press AUDIOto save and exit 2.2 Using Audio Menu on Handheld Remote Control (purchased separately)BlueCube+ Media Player (AQ-BC-6UBT) has equiped with a audio DSP to meet different listening experiences. 1. To enter audio menu, press once AUDIO button. 2. Each press of AUDIO button will advance to the next audio setting as described on the right. 3. In the audio menu, press and hold will save and exit the audio menu to the original mode. If you have chosen preset equalizer (Rock, Classic, or Pop), the previously set Bass, Treble will be overrided.
Listening to Devices Bluecube Media Player 6500-915www.aquaticav.com 73.1 Listening via Bluetooth 3.1.1 Pair with Bluetooth Device 1. Switch on your Bluetooth device. 2. Select 'AQUATIC AV' from the list of available devices to pair (no password is needed). 3.1.2 Listening via Bluetooth Device 1. Bluetooth mode will be activated once a Bluetooth device is paired. 2. Play the song from device and the sound will play through the Bluecube Media Player. 3. Press Play/Pause to play/pause the song.4. Press Fast Rewind or Fast Forward buttons to play previous or next song5. Track and volume can be controlled directly from your Bluetooth device or remote control. 3.1.3 Multi-link FeatureA second Bluetooth device can always pair to the BlueCube Media Player even when it has been paired to another Bluetoot device. 3.2 Listening via Auxiliary Input 1. Connect your MP3 device to the 3.5mm stereo jack. 2. Press Mode on the remote control to select 'AUX IN' mode. 3.3 Adjust Volume Level 1. Press Volume Up once to increase the volume. 2. Press Volume Down once to reduce the volume. 3. Press and hold either Volume Up or Volume Down to increase or decrease audio volume continuously. Other Features4.1 Using VBass1. VBass is a features to boost up the bass of the audio using latest DSP technology. 2. Press VBass once to toggle it ON or OFF. 4.2 12V External TriggerPress EXT on the remote to toggle the External Trigger ON/OFF. When Ext Trigger is turned on, +12Vdc will be from EXT wire. This can be used for turning ON/OFF other devices. 4.3 Pump ControlPress 1, 2, or 3 to toggle the pump 1, 2, or 3 On/Off.
Specifications & Dimensions Bluecube Media Player 6500-915www.aquaticav.com 84.1 SpecificationsMedia Supported mediaDevice control Inputs AuxiliarySubwoofer Sub-outPowerOutput voltage @2 Ohm Output voltage @4 OhmOperation voltageMax current drawStandby current draw Multi-Environment CertificationsWaterproof / Dustproof Conformal PCB coatingUV ProtectionSalt/Frog protectionStainless steel mountings Bluetooth/MP3via Bluetooth / MP3 devicevia Jacuzzi Spa Top Side Panel, RF Handheld Remote Control or Wired Remote Control (sold separately)1x stereo pair 3.5mm stereo input1x connector 4x 72W 4x 45W9.6V - 14.4V7A6mAYes IP64Yes500 hours stable. ASTM D4329 compliant500 hours stable. ASTM B117 compliantYes
Warranty Information Bluecube Media Player 6500-915www.aquaticav.com 9Aquatic AV offers a limited warranty of our products on the following terms: Length of Warranty2 years on audio systems, electronics, speakers, and accessories (receipt required). CoverageThis warranty covers only the original purchaser of a Aquatic AV product purchased from an authorized Aquatic AV dealer in the United States. In order to receive service, the purchaser must provide Aquatic AV with a copy of the receipt stating the customer name, dealer name, product pruchased and date of purchase. Defective productsProducts found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Aquatic AV's discretion. What is not coveredDamage caused by accident, abuse, improper operation, theft. Any cost or expernse related to the removal or reinstallation of the product. Service performed by another other than an authorized Aquatic AV service center. Any product with the serial number or tamper labels defaced, altered or removed. Subsequent damage to other components. Any product not purchased from an authorized Aquatic AV dealer. Limit on implied warrantiesAny implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitation on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product. How to obtain serviceYou must obtain a return material authorization number (RMA) to return any product to Aquatic AV. You are responsible for shipping charges of returned products to Aquatic AV. Please record the model and serial number[s] of your equipment in the spaced provided below as your permanent record and will assist us with your factory warranty coverage. These numbers can be found on the rear of the BlueCube Media Player. Model number[s]: Serial number[s]:
FCC Statements Bluecube Media Player 6500-915www.aquaticav.com 10FCC ID: MADE IN CHINAThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver. -- Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. WBQAQRFDM6BU
products with watertight reputationAquatic AV282 Kinney DriveSan Jose, CA65112, USAE-mail: info@aquaticav.comUS & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125www.aquaticav.com

Navigation menu