AQUATIC AV AQRFDM6BU Multimedia Locker User Manual IB BC 6UBT V0 1 20161202

Download:
Mirror Download [FCC.gov]
Document ID	3267494
Application ID	dJRxtNLOwIo7X5xf/do2gw==
Document Description	15_AQ-BC-6UBT UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	132.85kB (1660574 bits)
Date Submitted	2017-01-23 00:00:00
Date Available	2017-01-23 00:00:00
Creation Date	2016-12-08 19:57:42
Producing Software	Corel PDF Engine Version 1.0.0.536
Document Lastmod	0000-00-00 00:00:00
Document Title	IB-BC-6UBT-V0.1-20161202.cdr
Document Creator	CorelDRAW 版本 12.0

products with watertight reputation
BLUECUBE+ AQ-BC-6UBT
'HIDE-AWAY' MEDIA PLAYER
for Bluetooth, USB, iPhone, iPod, MP3 devices, and FM Radio
USER / INSTALLATION MANUAL
USB 2.0
Bluetooth
PLEASE READ THIS INSTRUCTION MANUAL BEFORE
INSTLAATION AND OPERATION
Table of Contents
Bluecube Media Player AQ-BC-6UBT
1 Getting Started
1.1 Contents
1.2 Connections
1.3 12-pin Harness Connection
1.4 Mounting the BlueCube Media Player
1.5 Power On
1.6 Handheld Remote Control Charging
1.7 Handheld Remote Control Synchronizing
2 Location of Controls
2.1 Wireless Handheld Remote Control
3. Listening to Devices
3.1 Listening via USB
3.1.1 USB thumb drive
3.1.2 Charging
3.2 Listening via Bluetooth
3.2.1 Pair with Bluetooth Device
3.2.2 Listening via Bluetooth Device
3.2.3 Multi-link
3.3 Listening via Auxiliary Input
3.4 Adjusting Volume Level
4. Listening to FM Radio
4.1 Enter FM Radio Mode
4.2 Scan or Seek FM Radio Channels
4.3 Saving Radio Channel to Memory
4.4 Listening to Saved Radio Memory
4.5 Adjust Volume Level
5 Using Audio Menu on Handheld Remote Control
6 Using VBass
7 Additional Features
5.1 External 12V Trigger
5.4 Connectng Multiple Amplifiers or High Current Draw Lighting Systems
8 Specifications & Dimensions
6.1 Specifications
6.2 Dimensions
10
10
10
9 Warranty Information
11
10 FCC Statements
12
www.aquaticav.com
Getting Started
Bluecube Media Player AQ-BC-6UBT
1.1 Contents
 AQ-BC-6UBT BlueCube+ Media Player
 2-Way RF Waterproof Remote Control
 Wiring Harness (AQ-UNH-2)
 Four (4) Staineless Steel Mounting Screws
 Owner's Manual
1.2 Connections
1: 12-pin Watertight Harness
The 12-pin harness supplies power and ground connection to the BlueCube+ Media Player and four (4)
speaker channel output connections from the BlueCube+ Media Player.
Do not cut or modify the 12-pin harness on the unit side or warranty will be void.
2: FM Radio Antenna Jack
Connect antenna (AQ-ANT-1 sold separately) to female antenna receptacle. For best FM performance,
make sure the antenna is extended to the highest achievable position.
3: Auxiliary Outputs - Rear
Allows external amplifiers to be connected to power additional speakers.
4: Auxiliary Outputs - Front
Allows external amplifiers to be connected to power additional speakers.
5: Auxiliary Inputs
Connect to a portable audio player through the AUX IN cable on the back of the BlueCube+ Media Player.
6: 12V DC External Trigger
Allows for an external light or relay to be triggered (2A max load). There are two external triggers
7: USB Connector
Connect a USB device play music.
8: Wired Remote 8-pin DIN Connector
Connect to a wired Remote Control
9: Power On LED
When the BlueCube is powered On, the LED will lit.
10: Bluetooth Antenna Connection
Connect to the Male SMA connector of the Bluetooth antenna (AQ-BTANT-1). Do not apply excessive
torque on the SMA connector (no more than 0.5N-m). Use hands to tighten the connection. (No wrench is
used)
2 FM Radio Antenna Jack
1 12-pin Watertight Harness
3 RCA Auxiliary Outputs (Rear)
4 RCA Auxiliary Outputs (Front)
5 RCA Auxiliary Outputs (Front)
6 External 12V Trigger wires (Brown)
7 USB Connector
8 8-pin DIN Cables (Black)
9 Power On LED
10 Bluetooth Antenna Connector
www.aquaticav.com
Getting Started
Bluecube Media Player AQ-BC-6UBT
1.3 12-pin Harness Connection
The AQ-BC-6UBT includes the universal harness AQ-UHN-2 in order to connect the BlueCube to power and
speakers.
All open wire connections should be soldered and protected against water and dust for best long term
performance.
Left Rear Speaker
LR-(2) (Green/strip)
LR+(3) (Green color)
Left Front Speaker
LF-(5) (White/strip)
LF+(6) (White color)
(Red color)
ACC
Please put a
fuse into the box
FUSE BOX
+12VDC(1)
Power Antenna (7)
(Yellow color)
(Blue color)
DC Ground (10)
Right Front Speaker
RF-(8)
RF+(9) (Gray color)
Right Rear Speaker
(Black color)
(Gray/strip)
RR-(11) (Purple/strip)
RR+(12) (Purple color)
No lower than 2 Ohm load should be used
or damage may occur to the BlueCube Media
Player.
Make sure the polarity of speakrs are
connected correctly.
1.4 Mounting the BlueCube Media Player
1. Make sure the outside surface is clean and clear of
debris
2. The BlueCube Media Player has four (4) front
screws. Drive the screws using a screw driver.
Make sure screws are snug and do not over tighten.
www.aquaticav.com
Getting Started
Bluecube Media Player AQ-BC-6UBT
1.5 Power On
The AQ-BC-6UBT requires +12V dc to both the red and yellow wires. When both of these wires have power,
the AQ-BC-6UBT is always powered on and is indicated by a red LED coming out of the heatsink of the
stereo. Ground is connected to the Black wire.
In a SPA application, this requires the red and yellow wires to be jumped together and tehn connected to
+12V dc output of the power source. In this set up, the AQ-BC-6UBT will always be on, with a very low
current draw when idle.
In a bot, ATV or other application requiring power from a battery, the yellow wire (constant power) should be
connected to the battery, and the red wire connected to the ignition or a switch.
For detailed instructions, you can check out our online video:
"How to wire your Aquatic AV stereo system"
http://www.aquaticav.com/support/videos
1.6 Handheld Remote Control Charging
The remote has a built-in Polymer Lithium rechargeable battery. It comes with a custom made charging
cable which is used. Connect one end to the blades of the remote control and another to any USB charger
(5V dc) for charging.
Make sure the remote has been charged before used.
1.7 Handheld Remote Control Synchronizing
The remote should already be paired from the factory, but if you need to synchronize the remote, follow
below steps.
1. Make sure BlueCube+ Media Player (AQ-BC-6UBT) is powered ON (red LED lit)
2. Put the remote close to the BlueCube+ Media Player (within 0.5 meter)
2. Press and hold MODE on remote control until the LCD shows "Pairing in Progress". Release the button.
3. WIthin 2 seconds, the LCD will show "Paired". If it fails to pair, the LCD will show "Retry again". If this
happens, wait 5 seconds and repeat the above procedures.
For any additional remote controls, you will also need to synchroize those remote controls to the BlueCube
Media Player (AQ-BC-6UBT).
If the pairing process is not successful, try again to put your remote close to the dongle.
Depending on the frequency of usage, the remote might drain its battery. Please charge the remote before
use. If the LCD shows nothing, it means that the battery has been drained.
If you have lost your remote control and buy a new remote control, please follow the above steps to pair the
remote control
www.aquaticav.com
Location of Controls
Bluecube Media Player AQ-BC-6UBT
2.1 Wireless Handheld Remote Control AQ-RF6UBT-T (sold separately)
MODE
PAIR
AUDIO
Buttons
Button Action
Bluetooth
AUX
MP3
FM Radio
Press once:
Press and hold:
Toggle Operational mode to Standby mode or vice versa
No function
Press once:
Press and hold:
Change mode
Synchronize remote control
Volume
Up
Press once:
Press and hold:
Volume up
Fast volume up
Volume
Down
Press once:
Press and hold:
Volume down
Fast volume down
Fast
Forward
Press once:
Press and hold:
Next track
Fast forward
No function
No function
Next track
Fast forward
+0.05kHz
Scan up
Fast
Rewind
Press once:
Press and hold:
Previous track
Fast Rewind
No function
No function
Previous track
Fast Rewind
-0.05kHz
Scan down
Play/
Pause
Press once:
Press and hold:
Play / Pause
No function
Mute / unmute
No function
Play / Pause
No function
Mute / unmute
No function
Power
MODE
Mode/Pair
PAIR
Press once:
Press and hold:
No function
No function
No function
No function
No function
No function
Preset 1
Save to Preset 1
Press once:
Press and hold:
No function
No function
No function
No function
No function
No function
Preset 2
Save to Preset 2
Press once:
Press and hold:
No function
No function
No function
No function
No function
No function
Preset 2
Save to Preset 2
EXT
Trigger
Audio
AUDIO
VBass
www.aquaticav.com
Press once:
Press and hold:
Toggle EXT 1 on/off Toggle EXT 1 on/off Toggle EXT 1 on/off Toggle EXT 1 on/off
Toggle EXT 2 on/off * Toggle EXT 2 on/off * Toggle EXT 2 on/off * Toggle EXT 2 on/off *
Press once:
Press and hold:
Enter Audio Menu
Exit Audio menu
Press once:
Press and hold:
Toggle VBass on/off
No function
Listening to Devices
Bluecube Media Player AQ-BC-6UBT
3.1
Listening via USB
3.1.1
USB thumb drive
1. Attach your USB thumb drive to the femal USB socket of the BlueCube+ Media Player.
2. Press MODE on the remote to select USB mode.
3. Press
to play or pause the music.
4. Press once
/ to play previous / next song file.
5. Press and hold / to fast forward / fast rewind the song file.
3.1.2
Charging
The USB socket can deliver 2.1A of current to charge a device battery.
3.2
Listening via Bluetooth
3.2.1
Pair with Bluetooth Device
1. Switch on your Bluetooth device.
2. Select 'AQUATIC AV' from the list of available devices to pair (no password is needed).
3.2.2
Listening via Bluetooth Device
1. Bluetooth mode will be activated once a Bluetooth device is paired in any mode. Use MODE to
change to the Bluetooth mode to listen to music.
2. Play the song from device and the sound will play through the Bluecube Media Player.
3. Press
to play/pause the song.
4. Press / to play previous or next song
5. Press and hold / to fast forward / fast rewind the song file.
Track and volume can also be controlled directly from your Bluetooth device or remote control.
3.2.3
Multi-link
A second Bluetooth device an always pair to the BlueCube Media Player even when it has been paired
to another Bluetoot device.
3.3
Listening via Auxiliary Input
1. Connect your MP3 device ot the RCA inputs
2. Press MODE on the remote control to select 'AUX' mode.
IMPORTANT: Only one Auxiliary input (RCA) can be used at any one time.
3.4
Adjust Volume Level
1. Press Volume Up once to increase the volume.
2. Press Volume Down once to reduce the volume.
3. Press and hold either Volume Up or Volume Down to increase or decrease audio volume
continuously.
www.aquaticav.com
Listening to FM Radio
4.1
Bluecube Media Player AQ-BC-6UBT
Enter FM Radio Mode
1. Press MODE on the remote control to switch to FM radio mode.
2. Press
to mute or unmute the audio
If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD.
FM radio is only available when you are in FM Radio mode.
4.2
Scan or Seek FM Radio Channels
1. Press and hold / to seek another station
2. Press once / to -0.05kHz or +0.05kHz to the frequency.
4.3
Saving Radio Channel to Memory
To save the current frequency to memory, press and hold 1, 2 or 3 for more than 2 seconds. The
station will be stored into relevant button.
4.4
Listening to Saved Radio Memory
Press the 1, 2, or 3 preset button once to listen to the station stored in that button.
4.5
Adjust Volume Level
1. Press + once to increase the volume one step.
2. Press - once to reduce the volume one step.
3. Press and hold either + or - to increase or decrease audio volume continuously.
5.
Using Audio Menu on Handheld Remote
Control
BlueCube+ Media Player (AQ-BC-6UBT) has
equiped with a audio DSP to meet different
listening experiences.
1. To enter audio menu, press once AUDIO button.
2. Each press of AUDIO button will advance to the
next audio setting as described on the right.
3. In the audio menu, press and hold AUDIO will
save and exit the audio menu to the original
mode.
If you have chosen preset equalizer (Rock,
Classic, or Pop), the previously set Bass, Treble
will be overrided.
6.
Short press AUDIO
AUDIO MENU
BALANCE
Use +/- to adjust
Short press AUDIO
Long press AUDIO
to save and exit
FADER
Use +/- to adjust
Short press AUDIO
Long press AUDIO
to save and exit
BASS
Use +/- to adjust
Short press AUDIO
Long press AUDIO
to save and exit
TREBLE
Use +/- to adjust
Short press AUDIO
Long press AUDIO
to save and exit
Long press AUDIO
to save and exit
Long press AUDIO
to save and exit
ROCK
Short press AUDIO
CLASSIC
Short press AUDIO
POP
Short press AUDIO
Using VBass
1. VBass is a features to boost up the bass of the audio using latest DSP technology.
2. Press
once to toggle it ON or OFF.
www.aquaticav.com
Additonal Features
7.1
Bluecube Media Player AQ-BC-6UBT
External 12V Trigger
Aquatic AV understands the need for more flexible remote applications. With the BlueCube+ Media
Player, Auquatic AV has provided an independent 12V 'accessory' trigger, activated from the RF
wireless remote. This could activate any 12V based device like 12V lights or 12V motors.
In any operational mode, press the
(12V TRIGGER) button to activate. Press again to deactivate.
Depending on the versions, if there are two external trigger wires, you can also activate the second
external trigger by press and hold
for the second external trigger.
Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV dealer if you are
considering this feature.
Load on External Trigger(s) should not exceed 2A.
7.2
Connecting Multiple Amplifiers or High Current Draw Lighting Systems
Wiring a Single Pole Single Throw (SPST) Relay
The SPST is necessary to protect the stereo in
systems with multiple amplifiers. The AQ-BC-6UBT
remote and trigger wire provide 2A max current. While
this is enough to power a single amplifier, complex
systems with multiple amplifiers will require a SPST
relay.
12V DC output for amplifier
87
87
Position 30: requires 12VDC from the main power
source (12V battery, power supply etc). This should be
the same power source that is powering your stereo.
Position 85: this is where you connect your ground
from your power source (12V battery, power supply,
etc.) This should be the same ground reference as
your stereo.
Position 86: position 86 is triggered 12V, and is sent
when your stereo is powered on.
Triggered
12V DC from
stereo (Blue or
Brown wire)
86
85
30
Common
ground
Triggered
12V DC from
stereo (Blue or
Brown wire)
For Aquatic AV stereos, position 86 can be connected to either the blue remote wire in the harness or
the brown 12V trigger on the rear of the unit. There differences are below:
Blue (recommended): The blue (remote wire) provides a 12V DC output when the stereo is
powered on. Meaning as soon as the stereo is powered on, the blue wire sends 12V DC through th
relay powering on the amplifier.
Brown: The brown (12V Trigger) provides 12V DC output when it is triggered via the lightning bolt
icon on the faceplate or handheld remote. This setup is more advantageous in a more complex
system with several zones, as it gives you control of when an amplifier is on or off.
Position 87: this is 12V DC output that you will provide 12V DC to the remote turn on to the amplifiers
in your system.
www.aquaticav.com
Specifications & Dimensions
8.1
Bluecube Media Player AQ-BC-6UBT
Specifications
Media
Supported media
Device charging
Device control
A2DP / USB / iPod / iPhone / MP3 / FM / AUX
via USB (Remote by cable)
via RF Handheld Remote Control or Wired Remote Control
(sold separately)
Inputs
USB
Auxiliary
USB 2.0
1x stereo pair RCA input
Outputs
Pre-Out
2x stereo pair RCA (4V rms)
Power
Output voltage @2 Ohm
Output voltage @4 Ohm
Operation voltage
Max current draw
Standby current draw
4x 72W
4x 45W
9.6V - 14.4V
7A
6mA
Multi-Environment Certifications
Waterproof / Dustproof
Conformal PCB coating
UV Protection
Salt/Frog protection
Stainless steel mountings
Yes IP64
Yes
500 hours stable. ASTM D4329 compliant
500 hours stable. ASTM B117 compliant
Yes
www.aquaticav.com
10
Warranty Information
Bluecube Media Player AQ-BC-6UBT
Aquatic AV offers a limited warranty of our products on the following terms:
Length of Warranty
2 years on audio systems, electronics, speakers, and accessories (receipt required).
Coverage
This warranty covers only the original purchaser of a Aquatic AV product purchased from an authorized Aquatic
AV dealer in the United States. In order to receive service, the purchaser must provide Aquatic AV with a copy
of the receipt stating the customer name, dealer name, product pruchased and date of purchase.
Defective products
Products found to be defective during the warranty period will be repaired or replaced (with a product deemed
to be equivalent) at Aquatic AV's discretion.
What is not covered
Damage caused by accident, abuse, improper operation, theft. Any cost or expernse related to the removal or
reinstallation of the product. Service performed by another other than an authorized Aquatic AV service center.
Any product with the serial number or tamper labels defaced, altered or removed. Subsequent damage to other
components. Any product not purchased from an authorized Aquatic AV dealer.
Limit on implied warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the
period of the express warranty set forth above. Some states do not allow limitation on the length of an implied
warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in
connection with the sale of the product.
How to obtain service
You must obtain a return material authorization number (RMA) to return any product to Aquatic AV. You are
responsible for shipping charges of returned products to Aquatic AV.
Please record the model and serial number[s] of your equipment in the spaced provided below as your
permanent record and will assist us with your factory warranty coverage. These numbers can be found on the
rear of the BlueCube Media Player.
Model number[s]:
www.aquaticav.com
Serial number[s]:
11
FCC Statements
Bluecube Media Player AQ-BC-6UBT
FCC ID :WBQAQRFDM6BU
MADE IN CHINA
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
www.aquaticav.com
12
Aquatic AV
282 Kinney Drive
San Jose, CA65112, USA
E-mail: info@aquaticav.com
US & Canada: 1 877 579 2782
International: +1 408 559 1668
Fax: +1 408 559 0125
products with watertight reputation
www.aquaticav.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.536
Mod Date--Text                  : 
Creator Tool                    : CorelDRAW 版本 12.0
Modify Date                     : 2017:01:11 17:05:17+08:00
Metadata Date                   : 2017:01:11 17:05:17+08:00
Format                          : application/pdf
Title                           : IB-BC-6UBT-V0.1-20161202.cdr
Document ID                     : uuid:12af87fc-041e-4b57-ac4e-cc0a1544f299
Instance ID                     : uuid:e9a03ad1-faaa-4108-bdc7-19b4d2664ce6
Page Count                      : 13
Create Date                     : D:20161208195742
Creator                         : CorelDRAW 版本 12.0

EXIF Metadata provided by EXIF.tools