AQUATIC AV CP6 CP6 User Manual

AQUATIC AV CP6

User Manual

PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATIONUSER / INSTALLATION MANUALCP6 - WATERPROOF STEREOCHARGINGRADIOAM/FMRADIOAM/FM288WPOWERTRIGGER12VTRIGGERS12VDSP EQDSP EQE-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 www.aquaticav.comAquatic AV 282 Kinney Drive San Jose, CA 95112, USAFCC ID: WBQCP6
1 Getting Started.........................................................................1.1 Contents............................................................................1.2 Connections.......................................................................1.3 Connections Diagram.........................................................1.4 Power On...........................................................................1.5 Installation........................................................................1.5.1 Mounting Hole Method 1.............................................1.5.2 Mounting Hole Method 2.............................................1.5.3 Installation Method 1..................................................1.5.4 Installation Method 2..................................................2 Controlling the Stereo...............................................................2.1 Location of Controls...........................................................2.2 Control Functions...............................................................2.3 Wired Remote Control WR6 (sold separately)...........................3 Listening via Bluetooth.............................................................3.1 Listening via Bluetooth......................................................3.2 Pair with Bluetooth Audio Device.......................................3.3 Listening via Bluetooth Audio Device.................................3.4 Bluetooth Multi-Link..........................................................4 Listening via USB.................................................................4.1 Listening via USB..............................................................4.2 Direct Search by Folder/File...............................................4.3 Direct Search by Track Number..........................................4.4 Random Playback..............................................................4.5 Repeat Playback................................................................4.6 Device Charging.................................................................5 Listening to DAB+ Digital Radio...............................................5.1 What is DAB+ Digital Radio?.............................................5.2 Listening to DAB+ Digital Radio........................................5.3 Manually Save DAB+ Stations to Memory..........................5.4 Automatically Save DAB+ Stations to Memory...................5.5 Listening to Saved Radio Memory.......................................6 Listening to AM/FM Radio.........................................................6.1 Listening to AM/FM Radio..................................................6.2 Manually Save AM/FM Radio Stations to Memory...............6.3 Automatically Save AM/FM Radio Stations to Memory........6.4 Listening to Saved Radio Memory.......................................333456667899101112121212121313131313131314141414141415151515157 Audio & Settings Menus...........................................................7.1 Audio Menu........................................................................7.1.1 Beep Tone...................................................................7.1.2 EQ...............................................................................7.1.3 Loudness.....................................................................7.2 Setting Menu.....................................................................7.2.1 Dimmer High/Low........................................................7.2.2 Priority Display (Info/Clock).........................................7.2.3 Power On Volume.........................................................7.2.4 Area US/Euro...............................................................7.2.5 Local On/Off................................................................7.2.6 Stereo/Mono................................................................7.2.7 Clock Settings.............................................................7.2.8 Bluetooth Off/Link.......................................................7.2.9 Restore........................................................................8 Additional Features..................................................................8.1 Listening to Auxilliary Devices...........................................8.2 External 12V Triggers.........................................................9 Specifications & Dimensions....................................................9.1 Specifications....................................................................9.2 Dimensions........................................................................10 Warranty Information..............................................................16161616161616171717171717171718181819191920Table of Contents CP6 WATERPROOF STEREOwww.aquaticav.com2CP6 WATERPROOF STEREO23www.aquaticav.comThis page is intentionally blank
*Retail packaged models only.• CP6 Waterproof Stereo• Silicon Faceplate• User/Installation Manual• Wiring Harness (AQ-UNH-2)*• Four (4) Stainless Steel Mounting Screws*• Mounting Template*1.1 Contents1. 12-pin Watertight Harness*The 12-pin harness supplies power and ground connections to the stereo and four (4) speaker channel output connections from the stereo.Do not cut or modify the 12-pin harness on the stereo side or warranty will be void.2. AM/FM Radio Antenna JackAllows connection of AM/FM radio antenna. For best AM/FM performance make sure the antenna is extended to the highest achievable position.3. Auxiliary OutputsAllows external amplifiers to be connected to power additional speakers.4. Auxiliary Inputs Allows an additional RCA input, from a standalone unit or another stereo source.5. Wired Remote Connector Allows connection of the wired Remote Control (WR6 sold separately).6. 12V DC External Trigger (x2)Allows for external lighting or relays to be triggered (3A max load).7. USB InputPlay USB thumb drives with supported audio media and charge devices when connected.8. DAB Input CableAllows connection of the DAB+ Digital Radio Receiver (sold separately).9. Bluetooth AntennaAllows a Bluetooth device to wirelessly connect to the unit.1.2 Connections (see Wiring Diagram 1.3)Aquatic AV does not recommend the Wired Remote Control WR6 for use in spa applications.Getting Started CP6 WATERPROOF STEREO3www.aquaticav.comCP6 WATERPROOF STEREOwww.aquaticav.com22This page is intentionally blank
1.3 Connections DiagramAll open wire connections should be soldered and protected against water and dust for best long-term performance.No lower than a 2 Ohm speaker load should be used or damage may occur to the stereo. Make sure the polarity of speakers is connected correctly.Aquatic AV does not recommend the Wired Remote Control WR6 for use in spa applications.*Retail packaged models only.Product design and specification subject to change without notice. E&OE.Doc V1.4147102A- A581136912AA12-pin Watertight Harness*Pin No. Wire Color Description1 Green LR Speaker (+)2 Green/Black LR Speaker (-)3 Red Acc (+12V)4 White LF Speaker (+)5 White/Black LF Speaker (-)6 Yellow Battery (+12V)7 Gray RF Speaker (+)8 Gray/Black RF Speaker (-)9 Blue Power AMP Remote10 Violet RR Speaker (+)11 Violet/Black RR Speaker (-)12 Black GroundBluetooth Antenna129643785AM/FM Radio Antenna Jack12V DC External Trigger 1 (Brown)12V DC External Trigger 2 (Brown)RCA Auxiliary Inputs (Black)RCA Auxiliary Outputs (Gray)USB Input (Black)DAB Input (Black)Wired Remote Connector (Black)12-pin Watertight Harness*FuseRight Channel (Red)Left Channel (White)Right Channel (Red)Left Channel (White)SMA Connector with Heat Shrink Tube FCC ID: MADE IN CHINA FCC Statement to the UserThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: 1. Reorient or relocate the receiving antenna. 2. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 3. Increase the separation between the equipment and receiver. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationGetting Started CP6 WATERPROOF STEREO FCC Statement CP6 WATERPROOF STEREO21www.aquaticav.comwww.aquaticav.com4
In a spa application the red and yellow wires should be jumped together and then connected to the +12VDC output of the power source. In this set up the CP6 will always be on, with a very low current draw when idle.In a boat, ATV or other application requiring power from a battery, the yellow wire (constant power) should be connected to the battery, and the red wire should be connected to the ignition or a switch. For detailed instructions you can check out our online video:‘How to wire your Aquatic AV stereo system’http://www.aquaticav.com/support/videosOnce all connections are made press the rotary knob and the stereo will turn ON. Press and hold rotary knob for 2 seconds to turn the unit OFF.1.4 Power OnAquatic AV offers a limited warranty of our products on the following terms:Length of warranty 2 years on audio systems, electronics, speakers, and accessories (receipt required).Coverage This warranty covers only the original purchaser of an Aquatic AV product purchased from an authorized Aquatic AV dealer. In order to receive service, the purchaser must provide Aquatic AV with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase.Defective products Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Aquatic AV’s discretion.What is not covered Damage caused by accident, abuse, improper operations or theft. Any cost or expense related to the removal or reinstallation of product. Service performed by anyone other than an authorized Aquatic AV service center. Any product with the serial number or tamper labels defaced, altered, or removed. Subsequent damage to other components. Any product not purchased from an authorized Aquatic AV dealer.Limit on implied warranties Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product.How to obtain service You must obtain a return material authorization number (RMA) to return any product to Aquatic AV. You are responsible for shipping charges of returned products to Aquatic AV.Please record the model and serial number[s] of your equipment in the space provided below as your permanent record and will assist us with your factory warranty coverage. These numbers can be found on the rear of the stereo.Model number[s]: Serial number[s]:Getting Started CP6 WATERPROOF STEREO5www.aquaticav.comWarranty Information CP6 WATERPROOF STEREOwww.aquaticav.com20
PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION. Aquatic AV recommends installtion of this stereo by a professional technician.A mounting template is included (retail packaged models only). Aquatic AV recommends using the ‘measure twice, cut once’ method!1.5 Installation1. Check clearances on both sides of a planned installation area before drilling any holes.2. Cut the mounting hole using one of the two methods detailed below.3. Once complete make sure the outside surface is clean and clear of debris. The CP6 stereo has an external water/dust proof gasket which requires a clean and flat surface for best performance.1.5.1 Mounting Hole Method 11. Use a spirit level to mark two points 2” (50.8mm) horizontally apart.2. Drill two pilot holes at the marked points and then using a circular saw drill two holes with a 3” (76.2mm) diameter.3. The CP6 should fit through the widest points of the hole and then be secured using either of the two installaion methods listed below.1. Using a jigsaw cut a rectangluar hole with dimensions 111mm (W) x 51mm (H).1.5.2 Mounting Hole Method 2*Retail packaged models only.111mm51mm Not to scale! Please use the mount-ing template provided*2”3”3”Chassis dimensions 110mmx 50mmNot to scale! Please use the mount-ing template provided*MediaSupported Media....................................Device Charging.....................................InputsAuxiliary................................................OutputsPre-Out..................................................12V Trigger............................................PowerOutput Voltage @ 2 Ohm.........................Output Voltage @ 4 Ohm.........................Operation Voltage...................................Max Current Draw...................................Standby Current Draw.............................RadioDAB+ Digital Radio.................................AM/FM Radio......................................... Multi-Environment CertificationsWaterproof / Dustproof............................Conformal PCB Coating...........................UV Protection.........................................Salt/Fog Protection.................................Stainless Steel Mountings.......................Bluetooth Audio / USB / DAB+ / MP3 / AM / FM / AUXvia rear USB cable (2.1A)1x stereo pair RCA1x stereo pair RCA (2V)2x 12V triggers (3A) 4x 72W4x 45W10.5V - 14.4V DC10A<3mA18 pre-set memory Requires AQ-DAB+ Radio Receiver (sold separately)18x FM pre-set & 12x AM pre-set memory. US/Euro frequenciesUS: FM 88.7 to 108.0 (100kHz spacing). AM 530 to 1710 (10kHz spacing)EURO: FM 87.5 to 108.0 (50kHz spacing). AM 522 to 1620 (9kHz spacing)IP65Yes500 hours stable, ASTM D4329 compliant500 hours stable, ASTM B117 compliantYes9.1 Specifications9.2 Dimensions102mm157mm50mm90mm89mm25mm 110mm142mm23mm50mm 90mmGetting Started CP6 WATERPROOF STEREO Specifications & Dimensions CP6 WATERPROOF STEREO19www.aquaticav.comwww.aquaticav.com6
Make sure to connect other wires before power connection.1. Slide the CP6 stereo through the mounting hole and secure the stereo using the mounting bracket. If the bracket needs to be shortened this can be done by removing the appropriate number of breakaway segments using a pair of pliars.2. Review all outside surfaces of the CP6 stereo to ensure a proper water/dust seal. This is important for long-term environmental protection performance.1.5.3 Installation Method 1DashboardMounting hole size (111 x 51mm)Break LinesMounting BracketThe CP6 stereo has two independent 12V ‘accessory’ triggers. These could activate any 12V based device, such as 12V lights or 12V motors.In any operational mode, press the 12V TRIGGER button to activate. Press again to deactivate.If using two external trigger wires you can also activate the second external trigger by pressing and holding the 12V TRIGGER button to activate. Press and hold again to deactivate.8.2 External 12V TriggersLoad on External Trigger should not exceed 3A.Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV dealer if you are considering using this feature.8.1 Listening to Auxiliary Devices1. Connect your audio device to the rear RCA connectors using a stereo RCA cable.2. Press MODE on the stereo or remote control to select ‘AUX’ mode.3. Play the song from your auxiliary audio device and the sound will play through the stereo.Always ensure you connect and disconnect the stereo with dry hands!Getting Started CP6 WATERPROOF STEREO7www.aquaticav.comAdditional Features CP6 WATERPROOF STEREOwww.aquaticav.com18
1. Remove the front trim ring from the CP6 stereo to reveal the four (4) front locking screws.2. Slide the CP6 stereo through the mounting hole and secure the stereo using the front locking screws.3. Drive the screws using a screw driver. During final mounting, apply equal pressure to all points for the best water/dust outer seal performance. Make sure screws are snug and do not over tighten.4. Review all outside surfaces of the CP6 stereo to ensure a proper water/dust seal. This is important for long-term environmental protection performance.5. After installation in complete snap the trim ring back firmly in to place to cover the screw holes.1.5.4 Installation Method 2Make sure to connect other wires before power connection.DashboardRemove Trim RingMounting hole size (111 x 51mm)Locking ScrewsTrim Ring7.2.9 RestoreRestores all factory settings.7.2.3 Power On VolumeSets the maximum volume the stereo will be set when powering the unit on. If the stereo is switched off with a lower volume than the P-Vol setting then the lower volume setting will be used.Normal volume control and operation is resumed once the Rotary Selector is turned after switching the stereo on.7.2.4 Area US/EuroSelect US or European AM/FM radio frequencies.7.2.6 Stereo/MonoChange the output mode between stereo and mono. Some applications only accept a mono input.7.2.7 Clock SettingsAdjust the time and switch the clock on or off.7.2.8 Bluetooth Off/LinkSwitches Bluetooth connectivity on or off. All paired devices will be disconnected in Bluetooth Off mode.US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,88.7 MHz. EUR mode will increase and decrease the FM frequency in steps of 0.05 MHz, e.g. 88.25, 88.30, 88.35 MHz.7.2.5 Local On/OffWhen Local is turned on the stereo seeks to only the radio channels with strong signal strength. When Local is turned off the stereo will seek to all radio channels it receives signal from.When Local setting is turned on the word ‘Local’ will appear in the upper right hand corner of the stereo’s display.7.2.2 Priority Display (Info/Clock)When set it to PRI INFO the display will by default show information relating to the music being played. Press and hold the MODE button to display the clock for 5 seconds.When set it to PRI CLK the display will by default show the clock. Pressing any key it will display information relating to the music being played for 5 seconds.Getting Started CP6 WATERPROOF STEREO Settings Operation CP6 WATERPROOF STEREO17www.aquaticav.comwww.aquaticav.com8
1. Preset 1 / Repeat Playback2. Fast Rewind3. Audio/Menu4. Mode button5. Rotary Selector6. Preset 2 / Random Playback7. 12V Triggers8. Fast Forward9. ESC/Preset10. Play/Pause11. Preset 312. LCD Display2.1 Location of ControlsRDMRPTAUDIO/MENUESC /Preset213MODE3 5421 6791011 8127.1 Audio MenuAny changes made in the Audio menu are system wide and will affect all modes.1. Press the AUDIO/MENU button to enter the Audio menu. The available Audio options are: BASS - TREBLE - BALANCE - FADER - BEEP - EQ - LOUD2. Turn the Rotating Selector to navigate the menu options.3. Press the Rotary Selector to open the desired Audio option or confirm changes to the Audio settings. 7.1.2 EQThe CP6 stereo is equipped with an audio DSP (Digital Signal Processor) to provide preset listening experiences for different music types. If you have chosen a preset equalizer setting (Flat, Rock, Classic, or Pop) the previous Bass & Treble settings will be overridden.7.1.1 Beep ToneThe beep tone plays when any button is pressed and can be switched on and off from this selec-tion.7.1.3 LoudnessIncreases the sound output level by 15dB.7.2 Settings MenuAny changes made in the Audio menu are system wide and will affect all modes.1. Press and hold the AUDIO/MENU button to enter the Settings menu. The available Settings options are: DIM H/L - PRI INFO/CLK - P-VOL - AREA USA/EUR - LOC ON/OFF - STEREO/MONO - CLOCKSET - BT OFF/LINK - RESTORE2. Turn the Rotating Selector to navigate the menu options.3. Press the Rotary Selector to open the desired Audio option or confirm changes to the Audio settings. 7.2.1 Dimmer High/LowAdjust the display brightness from 100% for normal operation to 30% brightness to reduce screen glare during night time operation.Controlling the Stereo CP6 WATERPROOF STEREO9www.aquaticav.comAudio & Settings Menus CP6 WATERPROOF STEREOwww.aquaticav.com16
2.2 Control FunctionsIf your music player is connected via the Auxiliary input you will not be able to control track or receive track information.Button Action AM/FM USB BT DAB AUXAudio/Menu Short Press Audio Menu: Bass - Treble - Balance - Fader - Beep - EQ - LoudLong Press Settings Menu: Dim H/L - PRI Info/Clk - P-Vol - Area US/Euro - Loc On/Off - Stereo/Mono - Clock Set - BT Off/Link - RestoreESC/Preset Short Press 1) In MENU: EXIT2) In FM: CH1-> CH2-> CH3-> CH4-> CH5-> CH6-> CH1…1) In MENU: EXIT2) In USB: Direct Search / Number Search1) In MENU: EXIT2) In BT: No Function1) In MENU: EXIT2) In DAB: CH1-> CH2-> CH3-> CH4-> CH5-> CH6-> CH1…1) In MENU: EXIT2) In AUX: No FunctionLong Press Auto Store No Function No Function DAB Scan No FunctionFast Rewind Short Press Seek Down Previous Track Previous Track Previous Station No FunctionLong Press Manual Tune Fast Rewind No Function No Function No FunctionFast Forward Short Press Seek Up Next Track Next Track Next Station No FunctionLong Press Manual Tune Fast Forward No Function No Function No FunctionPlay/Pause Short Press Mute Play/Pause Play/Pause Mute MuteLong Press Manual Tune No Function No Function Manual Store No FunctionMode/Disp Short Press Changes SourceLong Press Display Clock/Info1/RPT Short Press Preset Ch.1 Read Repeat One / Repeat AllNo Function Preset Ch.1 Read Display Software VersionLong Press Preset Ch.1 Save DIR / Folder Down No Function Preset Ch.1 Save No Function2/RDM Short Press Preset Ch.2 Read Random No Function Preset Ch.2 Read No FunctionLong Press Preset Ch.2 Save DIR / Folder Up No Function Preset Ch.2 Save No Function3 Short Press Preset Ch.3 Read No Function No Function Preset Ch.3 Read No FunctionLong Press Preset Ch.3 Save No Function No Function Preset Ch.3 Save No FunctionRotary Selector Rotate Volume Up/Down and Navigate MenusPower/Band (Push Rotary Selector)Short Press Power On / Band Change / EnterEnter when in MenuPower On Band Change / EnterPower OnLong Press Power Off12V Triggers Short Press 12V DC Trigger 1 Output On/OffLong Press 12V DC Trigger 2 Output On/OffNavigating past the last Settings Menu item (Restore) will automatically exit the Settings Menu and enter the Audio Menu. Press and hold Audio/Menu button to enter the Settings Menu again.6.2 Manually Save AM/FM Radio Stations to Memory1. Tune to the station you would like to be saved as a preset.2. Press and hold the Play/Pause button and the stereo will display ‘SAVE CH1’.3. Turn the Rotary Selector to select the desired preset slot you would like to save the current station to.4. Press the Rotary Selector to save the preset. 5. Upon successfully saving a preset the preset number that was chosen will be shown in the right corner.Presets are only for the current band you are on. Each band FM1, FM2, FM3, AM1 and AM2 has six presets for a total of 30 (18x FM & 12x AM).6.1 Listening to AM/FM Radio1. Enter radio mode by pressing MODE and selecting RADIO.2. Navigate the available stations using the Fast Forward/Fast Rewind buttons.3. Select the desired station by pressing the Rotary Selector button.4. Press FAST REWIND/FAST FORWARD to seek another station.5. Press and hold FAST REWIND/FAST FORWARD for manual tuning. (Manual tuning will time out after 5 seconds of no action then we revert back to Seek/Auto).6. Press the Rotary Selector to change the AM/FM radio band.6.3 Automatically Save AM/FM Radio Stations to MemoryPress and hold the ESC/Preset button for 2 seconds to auto store stations to preset locations 1-6 of bands 1-3.6.4 Listening to Saved Radio Memory1. Press the ESC/Preset button to display your presets.2. Turn the Rotary Selector to navigate to the desired preset.3. Press the Rotary Selector to listen to the preset.Press button 1, 2 or 3 to listen to preset 1, 2 or 3 respectively; or alternatively:Controlling the Stereo CP6 WATERPROOF STEREO15www.aquaticav.comListening to AM/FM Radio CP6 WATERPROOF STEREOwww.aquaticav.com10
2.3 Wired Remote Control WR6 (sold separately)Please note Aquatic AV does not recommend wired remote controls are used for spa or hot tub applications as use in such applications is not covered by warranty.1. Play/Pause2. Fast Rewind3. Audio4. 12V Triggers5. Mode6. LCD Display7. Random Playback8. Fast Forward9. VBass10. Rotary SelectorButton Action AM/FM USB BT DAB AUXAudio Short Press Audio Menu: Bass - Treble - Balance - Fader - Beep - EQ - LoudLong Press Settings Menu: Dim H/L - PRI Info/Clk - P-Vol - Area US/Euro - Loc On/Off - Stereo/Mono - Clock Set - BT Off/Link - RestoreFast Rewind Short Press Seek Down Previous Song Previous Song Previous Station No FunctionLong Press Manual Tune Fast Rewind No Function No Function No FunctionFast Forward Short Press Seek Up Next Song Next Song Next Station No FunctionLong Press Manual Tune Fast Forward No Function No Function No FunctionPlay/Pause Short Press Mute Play/Pause Play/Pause Mute MuteLong Press No Function No Function No Function No Function No FunctionMode/Disp Short Press Changes SourceLong Press Display Clock/InfoVBass Short Press Loud On/OffLong Press No FunctionRotary Selector Rotate Volume Up/Down and Navigate MenusPower/Band (Push Rotary Selector)Short Press Power On / Band Change / EnterEnter Power On Band Change / EnterPower OnLong Press Power OffRandom Short Press Ch.1 - Ch.2 - Ch.3 - Ch.1...Random Playback On/OffNo Function Ch.1 - Ch.2 - Ch.3 - Ch.1...No FunctionLong Press No Function Repeat One / Repeat AllNo Function No Function Display Software Version12V Triggers Short Press 12V DC Trigger 1 Output On/OffLong Press 12V DC Trigger 2 Output On/Off5.3 Manually Save DAB+ Stations to Memory1. Tune to the station you would like to be saved as a preset.2. Press and hold the Play/Pause button and the stereo will display ‘SAVE CH1’.3. Turn the Rotary Selector to select the desired preset slot you would like to save the current station to.4. Press the Rotary Selector to save the preset. 5. Upon successfully saving a preset the preset number that was chosen will be shown in the right corner.Presets are only for the current band you are on. Each band has six presets for a total of 18 presets.5.4 Automatically Save DAB+ Stations to MemoryPress and hold the ESC/Preset button for 2 seconds to auto store stations to numeric buttons 1-6 of bands 1-3.5.1 What Is DAB+ Digital Radio?DAB+ Digital Radio provides access to hundreds of stations when used with Aquatic AV’s Digital Radio Receiver AQ-DAB+ (sold separately). DAB+ is only available within certain countries - please check your local network for more information. 5.5 Listening to Saved Radio Memory1. Press the ESC/Preset button to display your presets.2. Turn the Rotary Selector to navigate to the desired preset.3. Press the Rotary Selector to listen to the preset.Press button 1, 2 or 3 to listen to preset 1, 2 or 3 respectively; or alternatively:Always ensure you connect and disconnect the stereo with dry hands!When a DAB station is received the station’s clock will auto update the stereo’s clock.1. Connect the AQ-DAB+ Digital Radio Receiver (sold separately) to the stereo.2. Enter DAB+ mode by pressing MODE and selecting DAB.3. The first time DAB+ mode is used the stereo will automatically scan all available DAB+ stations.4. If required, to re-scan for new stations, press and hold the ESC/Preset button for 2 seconds to scan all available DAB+ stations.5. Navigate the available stations using the Fast Forward/Fast Rewind buttons.6. Select the desired station by pressing the Rotary Selector button.7. Press the Rotary Selector to change the DAB+ radio band.5.2 Listening to DAB+ Digital Radio12345610789Controlling the Stereo CP6 WATERPROOF STEREO11www.aquaticav.comListening to DAB+ Digital Radio CP6 WATERPROOF STEREOwww.aquaticav.com14
1. Enable Bluetooth Audio mode by pressing MODE and selecting Bluetooth.2. Switch on your Bluetooth Audio device.3. Select ‘CP6’ from the list of available devices to pair. No password should be required however if prompted for a password use ‘0000’.4. A Bluetooth logo will illuminate on the stereo’s LCD to verify Bluetooth is connected.3.2 Pair with Bluetooth Audio Device3.1 Listening via BluetoothThe Bluetooth Audio menu is accessible by pressing the Audio/Menu button and is used to con-nect a Bluetooth Audio device or disconnect a Bluetooth Audio device that has already been paired.3.3 Listening via Bluetooth Audio Device1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any mode. Use MODE to change to Bluetooth Audio mode to listen to music from your device.2. Play the song from device and the sound will play through the stereo.3. Press PLAY/PAUSE to play/pause the song.4. Press FAST REWIND/FORWARD buttons to play previous/next song file.5. Previous/next track and volume up/down can also be controlled directly from your Bluetooth Audio device.3.4 Bluetooth Multi-link A second Bluetooth Audio device can pair to the stereo even when music is playing from the first Bluetooth Audio device.Once paired, playing music from device 2 will override device 1 and the stereo will begin playing music from device 2.Should you wish to play music from device 1 again, wait 10 seconds and press play on device 1. This process can be repeated between device 1 and device 2 indefinitely while both devices are paired.4.6 Device ChargingWhen specified USB devices such as Smartphones or MP3 players are connected with a standard male-to-female USB cable the device’s battery will charge automatically. The USB connection will deliver 2.1A of current to charge a device battery. 4.1 Listening via USB1. Attach your USB thumb drive to the female USB connector.2. If your USB device is readable then USB source mode will be automatically selected and your compatible content will begin to play.3. Press PLAY/PAUSE to play or pause the music. 4. Press FAST REWIND / FAST FORWARD once play previous / next song file. 5. Press and hold FAST REWIND / FAST FORWARD to fast forward / fast rewind the song file. Playback and navigation of music files via USB includes MP3 and WMA files.4.4 Random PlaybackPress the RDM button to toggle Random Play on or off.4.5 Repeat PlaybackPress the RPT button to toggle Repeat One or Repeat All.1. Press ESC/Preset once and display will show ‘DIR SCH’2. Turn the Rotary Selector to select a desired folder. (If you have files in the Root, select ‘Root’). Then press the Rotary Selector to enter into that folder.3. Turn the Rotary Selector to select the desired file that you wish to play. Only compatible files will be displayed.4. You can either allow the unit to auto select the track that is being displayed or press the Rotary Selector to select the desired track.4.2 Direct Search by Folder/File1. Press ESC/Preset twice and the display will show ‘NUM SCH’2. Turn the Rotary Selector to select the desired track number. Turning clock-wise will increase the track number and turning anti-Clock-wise will decrease the track number.3. You can either allow the unit to auto select the track that is being displayed or press the Rotary Selector to select the desired track.4.3 Direct Search by Track numberListening via Bluetooth CP6 WATERPROOF STEREO Listening via USB CP6 WATERPROOF STEREO13www.aquaticav.comwww.aquaticav.com12

Navigation menu