ARCTIC P604BT Dynamic Bluetooth 4.0 Headphones User Manual welcome guide P604 Wireless tommy

ARCTIC (HK) Ltd. Dynamic Bluetooth 4.0 Headphones welcome guide P604 Wireless tommy

Users Manual

Example: Android 4.0Press Menu > Settings > Switch on Bluetooth > Bluetooth > Search for devices > P604 Wireless > Pair Notes: - Pairing mode will last up to ten minutes or until a device is found, two tones will sound to let you know when pairing has stopped. - If you exceed the effective range of approx. 10M (33ft) the headphone will disconnect and will automatically reconnect if the speaker re-enters the effective range within ten minutes. Phone OperationsIf the mobile device that is paired (via Bluetooth) with the P604 Wireless headphone is a cellular phone you can:LED IndicatorsStatusChargingBattery Full On and PairedParing ModeLow BatteryIndicationRed LED onBlue LED onBlue LED flashes Red and Blue LED will flash alternatelyRed LED flashesReconnection1. Turn on Bluetooth on phone.2. Switch on the P604 Wireless by pressing the multifunction button for 3 seconds.3. If your device was the latest one to be paired with the P604 Wireless it will connect automatically otherwise please repeat pairing section.Answer Call Press the once.End Call Press the once.Refuse Call Press and hold for 2 seconds. Switch Call Press and hold for 2 seconds while in a call. OFFSwitch On BluetoothONSelectP604 WirelessP604 WirelessONClick Searchfor DevicesClickSettingsONBluetoothis OnONNowConnectedP604 WirelessSelectBluetoothClick SettingsBluetoothis OnSelect P604 WirelessP604 WirelessSwitch On BluetoothNowConnectedP604 WirelessExample: iOSPress Settings > Bluetooth and switch Bluetooth on > P604 Wireless > PairSwitch onPress the multifunction button for 3 seconds until the blue LED lights upSwitch offPress the multifunction button for 3 seconds until the red LED lights upFunction DiagramGetting ConnectedThe P604 Wireless allows you to pair with your mobile device in 2 different ways:Charging the headsetIt is recommended to fully charge before initial use for better battery life.USB Chargers are available atchargers.arctic.acThe P604 Wireless can be charged while switched on or off. 1. Insert the micro USB cable into the P604 Wireless and the USB side into a power source.2. When the Blue light on constantly the P604 Wireless is fully charged.Music Stutters456Switch On / Off multifunction buttonLED indicatorMicro-USB charging MicrophonePrevious trackNext trackSmart Charger48001. Switch on the P604 Wireless by Press the Multifunction Button for 3 seconds.2. The P604 Wireless automatically enters pairing mode shown by the red and blue LED flash alternately. 3. Turn on Bluetooth on your phone and pair it with the headphone.A. Bluetooth Pairing1. Switch on the P604 Wireless by Press the Multifunction Button for 3 seconds.2. Enable NFC on your mobile device. 3. Slide your phone very slowly from top to bottom across the shown area of the right side of the headphone until you hear a beep and a confirmation message comes up on your mobile device.4. Play music!B. NFC One Touch Pairing (only for NFC enabled phones)NFC antennaHow to wear the headsetSwitch the Headset On or Off ButtonsButtons

Navigation menu