ARESON Technology AA-SR1PWUB 2.4GHz Wireless USB Dongle User Manual L216 manual cover

ARESON Technology Corp. 2.4GHz Wireless USB Dongle L216 manual cover

Users Manual

WirelessLASER MOUSE User's Guide(AA-SM1PWLB/AA-SR1PWUB)
Pull out the receiverWheel buttonID reset buttonMouseIntroductionCongratulations on your purchase of the most innovative mini wireless mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable.A. Hardware Installation2.4GHz, 20 Channels/216 IDUsing state-of-art technology. High tracking speed and sensitivity.Nano receiver.Longer battery life.Auto-Link, Plug and Play! No need to set the channel ID.Power on/off switch.Ergonomic design.1600 dpi resolution.2*AAA Alkaline batteries included.Power on/off switchThis product complies with IEC 60825-1, Class I laser product. The product complies with FCC and CE rules.Safety NoticePlease DO NOT direct the laser beam at anyone's eyes.Features+-A wrong battery placementmay cause batteries overheat.Battery compartment cover2 * AAA batteriesBattery cover 2. Connect the receivera. Turn on your PC.b. Connect the receivere to USB port on PC.PCUSB portPower on/off: There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.Receiver1. Insert the batteriesa. Remove the battery compartment cover on the bottom case of the mouse.b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.c. Close the battery compartment cover properly.d. Make sure the Power on-off switch on the bottom of the mouse is ON.e. The Low Power LED on the wheel bar will be on for 2 seconds if the mouse power is on.Low power indicatorReceiver
◎ Battery use reminders1. Remove worn-out batteries from equipment immediately and dispose of promptly.2. Keep all batteries (used or new) out of the reach of children.3. To have the batteries with a regular check and replace new batteries if not used for a long time.4. Never dispose of batteries in fire, as they could explode.5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture.6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.7. Remove batteries from the electrical device if the device is not going to be used for a long time.8. If the performance of the batteries decreases substantially, it is time to replace the batteries.◎ Trouble Shootinga. Make sure you have connected the receiver correctly to the computer's USB port.b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the computer, the computer monitor or external storage drives.c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The mouse and the receiverd. If you find the communication channel does not connect well. You can use the software connection tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the package or download from your local brand vendor's website. Press ID reset buttonRe-plug receiver12 3ID links OK!4. Replace the new batteries Please replace a pair of new batteries and follow the previous instructions. (2, 3)The red LED on the scroll wheel is the low batteries power indicator. It indicates that batteries inside the mouse are needed to be replaced.NoteWhile the mouse is working, if encountering any interference, the mouse and the receiver will automatically source out and transfer to another free channel. During the transferring, the cursor movement may have a second delay.Note3. Communication : The mouse & the receiverThe 2.4Ghz RF mouse features a dual-way transmission technology which enables the mouse and the receiver auto-communication.A. Auto-link mode1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the mouse and the receiver is auto-linked successfully.B. Manual modeRe-plug receiver and the ID will be set up automatically. If channel / signal is conflict, press mouse ID button to set up ID by manual.e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts, and change the settings as required.f. Make sure that you are not working the mouse on glossy or reflective surfaces.FCC statementThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:● Reorient or relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices).This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation.This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end its life separately from your household waste. There are sparate collection system for recycling in the EU.For more information, please contact the local authority or your retailer where you purchased the product.

Navigation menu