ARESON Technology CB0010 Wireless Optical Mouse User Manual B213 3D3B manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1375799
Application ID	4215ZhzO5hdG5WLWQgTPUA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.93kB (1686590 bits)
Date Submitted	2010-11-15 00:00:00
Date Available	2010-11-15 00:00:00
Creation Date	2009-03-18 18:57:39
Producing Software	Adobe PDF library 8.00
Document Lastmod	2010-11-15 16:29:49
Document Title	B213-3D3B-manual-1
Document Creator	Adobe Illustrator CS3

B213/B213M
Wireless Optical Mouse
User's Guide
Introduction
Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
2 * AAA batteries
Battery compartment cover
Features
2.4GHz (distance 6~8m), 16 Channels/4096 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Ergonomic design.
800/1600 dpi switchable button.
Internet Forward & Backward button
Rubber side grips and finger grooves.
2*AAA Alkaline batteries included.
A wrong battery placement
may cause batteries overheat.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
sucessfully swithced.
2. Connect the receiver
Mouse
Wheel button
Dpi button
Low power indicator
Battery cover
Receiver release
button
Receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC
Receiver
Press the receiver
release button
ID reset button
Power on/off switch
PC
A. Hardware Installation
1. Insert the batteries
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will blink 3 seconds if the mouse power is on.
USB port
3. Communication : The mouse & the receiver
The 2.4Ghz RF mouse features a long-distance transmission technology which enables the
mouse and the receiver auto-communication.
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can use the software
connection tool to re-connect the mouse & receiver to reset a new channel ID. You are
able to get the software from the included diskette of the package or download from your
local brand vendor's website.
ID links OK!
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help.
●
Press ID reset button
Note
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
4. Replace the new batteries
Please replace a pair of new batteries and follow the previous instructions. (2, 3)
Note
The red LED on the scroll wheel is the low batteries power indicator. It indicates that
batteries inside the mouse are needed to be replaced.
Trouble Shooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the
computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The
mouse and the receiver
d. If you find the communication channel does not connect well. You can use the software connection tool to re-connect
the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the
package or download from your local brand vendor's website.
e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts,
and change the settings as required.
f. Make sure that you are not working the mouse on glossy or reflective surfaces.
◎
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation if this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
●
Execute ID connection software
◎
FCC statement
Battery use reminders
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all batteries (used or new) out of the reach of children.
3. To have the batteries with a regular check and replace new batteries if not used for a long time.
4. Never dispose of batteries in fire, as they could explode.
5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with
zinc carbon) will reduce overall performance and could cause leakage or rupture.
6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.
7. Remove batteries from the electrical device if the device is not going to be used for a long time.
8. If the performance of the batteries decreases substantially, it is time to replace the batteries.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment.
(Example-use only shielded interface cables when connecting to computer or peripheral
devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:11:15 16:29:49+08:00
Create Date                     : 2009:03:18 18:57:39+08:00
Metadata Date                   : 2010:11:15 16:29:49+08:00
Creator Tool                    : Adobe Illustrator CS3
Thumbnail Width                 : 172
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9633 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : B213-3D3B-manual-1
Document ID                     : uuid:fe5e8b00-3d69-498e-ba0a-03d15eb18a92
Instance ID                     : uuid:34668983-2a42-4198-9a5e-3920efb0b223
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : F:\說明書\B213\L213-3D3B.jpg
Manifest Reference Instance ID  : uuid:F734AB55DE66DE11BE04DE1CC2F5F2EC
Manifest Reference Document ID  : uuid:F634AB55DE66DE11BE04DE1CC2F5F2EC
Producer                        : Adobe PDF library 8.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 296.333333
Max Page Size H                 : 209.550000
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldItalicMT
Font Family                     : Arial
Font Face                       : Bold Italic
Font Type                       : Open Type
Font Version                    : Version 2.90
Font Composite                  : False
Font File Name                  : ARIALBI.TTF
Plate Names                     : Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : 白色, 黑色, 80% 黑色, 60% 黑色, 40% 黑色, 20% 黑色, 紅色 M=100 Y=100, 75% 紅色 M=75 Y=75, 50% 紅色 M=50 Y=50, 25% 紅色 M=25 Y=25, 綠色 C=80 Y=100, 75% 綠色 C=60 Y=75, 50% 綠色 C=40 Y=50, 25% 綠色 C=20 Y=25, 藍色 C=100 M=50, 75% 藍色 C=75 M=37.5, 50% 藍色 C=50 M=25, 25% 藍色 C=25 M=12.5, 橘色 M=50 Y=100, 75% 橘色 M=37.5 Y=75, 50% 橘色 M=25 Y=50, 25% 橘色 M=12.5 Y=25, 紫色 C=50 M=90, 75% 紫色 C=37.5 M=67.5, 50% 紫色 C=25 M=45 , 25% 紫色 C=12.5 M=22.5, 天藍色 C=80, 75% 天藍色 C=60, 50% 天藍色 C=40, 25% 天藍色 C=20, 黃色, 75% 黃色, 50% 黃色, 25% 黃色
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001, 60.000002, 39.999998, 19.999999, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000
Swatch Colorant Magenta         : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 50.000000, 37.500000, 25.000000, 12.500000, 90.000004, 67.500001, 44.999999, 22.500002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000
Swatch Colorant Black           : 0.000000, 100.000000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 13.0
For                             : user,
Bounding Box                    : -36 -632 878 36
Container Version               : 11
Creator Version                 : 13

EXIF Metadata provided by EXIF.tools