ARESON Technology CB0025 2.4GHz Wireless Mouse User Manual B213 3D manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3287146
Application ID	VWKKMJgMvKTSt6+pthm0EQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.6kB (1794962 bits)
Date Submitted	2017-02-17 00:00:00
Date Available	2017-08-16 00:00:00
Creation Date	2014-12-24 13:56:40
Producing Software	Adobe PDF library 8.00
Document Lastmod	2015-03-05 09:49:34
Document Title	B213-3D-manual-1
Document Creator	Adobe Illustrator CS5

2.4GHz Wireless Mouse
B258
Manufacturer information
Company Name: ARESON Technology Corp.
Company address: 11F, No.646, Sec.5, Chongxin Rd., SanChong Dist., New Taipei City
241,Taiwan(R.O.C.)
User's Guide
Introduction
Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
Battery compartment cover
Features
2.4GHz (distance 6~8m), 16 Channels/ 224 ID.
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
800/1600 dpi switchable button.
2*AAA Alkaline batteries included.
Super slim design.
Mouse: RATED VOLTAGE: 3V
2 * AAA batteries
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the battery power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
sucessfully switched.
RATED CURRENT: 100mA
Receiver: RATED VOLTAGE: 5V
RATED CURRENT: 100mA
Mouse
Wheel button
Low power indicator
Dpi button
A wrong battery placement
may cause battery overheat.
Receiver
ID reset button
Power on/off switch
2. Connect the receiver
a. Turn on your PC.
b. Connect the receiver to USB port on PC.
Pull out
the receiver
Receiver
Battery cover
release button
A. Hardware Installation
1. Insert the battery
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the battery according to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on/off swich on the bottom of the mouse is ON.
e. The Low Power LED on the top case will be on for 6 seconds if the mouse power is on.
PC
USB port
3. Communication : The mouse & the receiver
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can use the software
connection tool to re-connect the mouse & receiver to reset a new channel ID. You are
able to download the software from your local brand vendor's website.
ID links OK!
Execute ID connection software
Press ID reset button
Note
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
4. Replace a new battery
Please replace a new battery and follow the previous instructions. (2, 3)
Note
The red LED on the scroll wheel is the low battery power indicator. It indicates that
battery inside the mouse is needed to be replaced.
◎
Troubleshooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical
devices, such as the computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the
Communication:The mouse and the receiver.
d. If you find the communication channel does not connect well. You can use the software connection
tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software
from the included diskette of the package or download from your local brand vendor's website.
e. Make sure that you are not working the mouse on glossy or reflective surfaces.
◎
Battery use reminders
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all battery (used or new) out of the reach of children.
3. To have the battery with a regular check and replace a new battery if not used for a long time.
4. Never dispose of battery in fire, as it could explode.
5. Do not use the wrong type of battery (e.g. Ni MH, NiCd, and etc) in the mouse.
7. Remove battery from the electrical device if the device is not going to be used for a long time.
8. If the performance of the battery decreases substantially, it is time to replace the battery.
FCC statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. (Example-use only
shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits sent forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
This symbol on the product means that the button beside the symbol is for ID reset & pairing.
This symbol means battery cover release button. Press this button to open the battery cover.
This symbol on the battery compartment means that the positive electrode of the battery should be plased
toward outside.
This symbol on the battery compartment means that the negative electrode of the battery should be plased
toward outside.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This product uses non-rechargeable Alkaline batteries.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Modify Date                     : 2015:03:05 09:49:34+08:00
Create Date                     : 2014:12:24 13:56:40+08:00
Metadata Date                   : 2015:03:05 09:49:34+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 56
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5381 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : B213-3D-manual-1
Document ID                     : xmp.did:35B9CF9B318BE4119ECFED3DC5263945
Instance ID                     : uuid:2fc8570c-b7f4-4a67-a194-4f8e7c2b8cee
Original Document ID            : uuid:e22f8748-1b9b-47e3-9d5e-0a0d644f3b3b
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:34B9CF9B318BE4119ECFED3DC5263945
Derived From Document ID        : xmp.did:34B9CF9B318BE4119ECFED3DC5263945
Derived From Original Document ID: uuid:e22f8748-1b9b-47e3-9d5e-0a0d644f3b3b
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:34B9CF9B318BE4119ECFED3DC5263945, xmp.iid:35B9CF9B318BE4119ECFED3DC5263945
History When                    : 2014:12:24 13:56:31+08:00, 2014:12:24 13:56:40+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /
Producer                        : Adobe PDF library 8.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 296.333333
Max Page Size H                 : 209.550000
Max Page Size Unit              : Millimeters
Font Name                       : ArialNarrow, ArialMT, Arial-ItalicMT, Arial-BoldMT, Arial-BoldItalicMT, Arial-Black, AdobeMingStd-Light, MingLiU, DFHei-Md
Font Family                     : Arial, Arial, Arial, Arial, Arial, Arial, Adobe 明體 Std, 細明體, 華康中黑體
Font Face                       : Narrow, Regular, Italic, Bold, Bold Italic, Black, L, Regular, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType
Font Version                    : Version 2.37, Version 5.10, Version 5.08, Version 5.08, Version 5.08, Version 5.06, Version 6.007;PS 6.001;hotconv 1.0.67;makeotf.lib2.5.33168, Version 7.00, 1 Aug., 1999: Unicode Version 1.00
Font Composite                  : False, False, False, False, False, False, False, False, False
Font File Name                  : ARIALN.TTF, arial.ttf, ariali.ttf, arialbd.ttf, arialbi.ttf, ariblk.ttf, AdobeMingStd-Light.otf, mingliu.ttc, dffn_0.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 16.0
For                             : Work,
Bounding Box                    : 44 14 2591 560
Container Version               : 11
Creator Version                 : 16
Image Height                    : 546
Image Width                     : 2547
Image Size                      : 2547x546
Megapixels                      : 1.4

EXIF Metadata provided by EXIF.tools