ARESON Technology CL0011 Wireless Laser mouse User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	1058669
Application ID	zgl9AI1np+3/+c2K7A8UJQ==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.41kB (1280096 bits)
Date Submitted	2009-01-20 00:00:00
Date Available	2009-01-20 00:00:00
Creation Date	2008-11-17 11:16:48
Producing Software	Adobe PDF library 5.00
Document Lastmod	2009-01-13 09:53:52
Document Title	manual
Document Creator	Adobe Illustrator 10.0

Introduction
A. Hardware Installation
Congratulations on your purchase of the most innovative wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
1. Insert the batteries
Safety Notice
This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.
e. The Low Power LED on the top case will blink 3 seconds if the mouse power is on.
2 * AAA batteries
Battery compartment cover
Please DO NOT direct the
laser beam at anyone's eyes.
A wrong battery placement
may cause batteries overheat.
Features
2.4GHz (distance 6~8m), 16 Channels/4096 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
4-way scrolling.
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Internet Forward & Backward button
Ergonomic design.
800/1600 dpi switchable button.
Rubber side grips.
2*AAA Alkaline batteries included.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on top case will be flashed when dpi has been
sucessfully swithced.
2. Connect the receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC
Press the receiver
release button
Mouse
Wheel button
Dpi button
Battery cover
Low power indicator
Receiver release
button
Receiver
Receiver
ID reset button
Power on/off switch
PC
USB port
3. Communication : The mouse & the receiver
Note
The 4-Way scrolling function is only effective under successful installation of the
original mouse driver. The driver is an optional item included in the package or it can
be downloaded from the website of your local brand vendor.
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.
To function the 4-way scrolling in some applications in Window VISTA such as Word,
Excel, PowerPoint and etc., the driver should be installed.
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can use the software
connection tool to re-connect the mouse & receiver to reset a new channel ID. You are
able to get the software from the included diskette of the package or download from your
local brand vendor's website.
B. Driver Installation
The mouse features plug & play. It is not necessary to install the driver to operate the mouse.
The driver is an optional item included. However if the model purchased is with 4-Way
Scrolling function, you may require the mouse software driver to make the 4-Way scrolling
function effective.
ID links OK!
Execute ID connection software
Press ID reset button
Note
1. Un-install or removing the current mouse driver
Before installing the driver of the mouse, we suggest that you check if any other mouse
driver installed in your system. If yes, in order not to make conflict, please un-install or
remove that driver before installing the mouse.
2. Install the mouse 4-Way Scrolling driver
a.Select setup.exe to install the driver from the CD.
b.or you can download the 4-Way Scrolling driver from vendor's website.
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
◎
4. Replace the new batteries
Please replace a pair of new batteries and follow the previous instructions. (2, 3)
Note
The red LED on the scroll wheel is the low batteries power indicator. It indicates that
batteries inside the mouse are needed to be replaced.
5. Operation
4-Way Scrolling:
a. Vertical Scrolling
Roll wheel up to scroll up; roll wheel down to scroll down.
b. Horizontal Scrolling
Hold the wheel to left to scroll left; hold the wheel to right to scroll
right. Release wheel to stop scrolling function.
Trouble Shooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the
computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The
mouse and the receiver
d. If you find the communication channel does not connect well. You can use the software connection tool to re-connect
the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the
package or download from your local brand vendor's website.
e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts,
and change the settings as required.
f. Make sure that you are not working the mouse on glossy or reflective surfaces.
◎
Battery use reminders
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all batteries (used or new) out of the reach of children.
3. To have the batteries with a regular check and replace new batteries if not used for a long time.
4. Never dispose of batteries in fire, as they could explode.
5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with
zinc carbon) will reduce overall performance and could cause leakage or rupture.
6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.
7. Remove batteries from the electrical device if the device is not going to be used for a long time.
8. If the performance of the batteries decreases substantially, it is time to replace the batteries.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2008:11:17 11:16:48+08:00
Metadata Date                   : 2009:01:13 09:53:52+08:00
Creator Tool                    : Adobe Illustrator 10.0
Format                          : application/pdf
Document ID                     : uuid:0ea85e0c-259d-47d1-a361-a268b3a73ba2
Instance ID                     : uuid:da78d9c9-10c3-4e0e-9c98-f5be2aa4ebf4
Producer                        : Adobe PDF library 5.00
Has XFA                         : No
Page Count                      : 3
IPTC Digest                     : 00000000000000000000000000000000
X Resolution                    : 593
Displayed Units X               : inches
Y Resolution                    : 593
Displayed Units Y               : inches
Print Style                     : Centered
Print Position                  : 0 0
Print Scale                     : 1
Global Angle                    : 30
Global Altitude                 : 30
Copyright Flag                  : False
URL List                        : 
Slices Group Name               : L212-4D-manual 1
Num Slices                      : 1
Photoshop Thumbnail             : (Binary data 8734 bytes, use -b option to extract)
Has Real Merged Data            : Yes
Writer Name                     : Adobe Photoshop
Reader Name                     : Adobe Photoshop 7.0
Exif Byte Order                 : Big-endian (Motorola, MM)
Orientation                     : Horizontal (normal)
Resolution Unit                 : inches
Software                        : Adobe Photoshop 7.0
Modify Date                     : 2009:01:13 09:45:01
Color Space                     : Uncalibrated
Exif Image Width                : 6919
Exif Image Height               : 4868
Compression                     : JPEG (old-style)
Thumbnail Offset                : 294
Thumbnail Length                : 0
Creator                         : Adobe Illustrator(R) 10.0
For                             : PM, RD
Title                           : F:\������\L212\L212-manual01.ai
Bounding Box                    : -36 -632 878 36
Container Version               : 9
Creator Version                 : 10

EXIF Metadata provided by EXIF.tools