ARESON Technology CL0022 Mini Receiver User Manual
ARESON Technology Corp. Mini Receiver
User Manual
Introduction
Congratulations on your purchase of the most innovative Mini Receiver.
Connect the receiver.
a. Turn on your PC.
b. Connect the receiver to USB port on PC.
The 2.4Ghz RF mouse features a dual-way transmission technology which enables
the mouse and the receiver auto-communication.
◎ Trouble Shooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance
from other electrical devices, such as the computer, the computer monitor or external
storage drives.
c. Make sure you have set the communication between the receiver and the mouse.
d. If you find the communication channel does not connect well. You can use the
software connection tool to re-connect the mouse & receiver to reset a new channel
ID. You are able to get the software from the included diskette of the package or
download from your local brand vendor's website.
FCC statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate this equipment. (Example-use only shielded interface cables when
connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may
cause undesired operation.