ARESON Technology CL0023 2.4GHz Wireless Dongle User Manual B319 3D3B manual 0

Download:
Mirror Download [FCC.gov]
Document ID	1551462
Application ID	+g3FBzS27T4xztJsrCaogw==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.46kB (1780793 bits)
Date Submitted	2011-09-29 00:00:00
Date Available	2011-09-29 00:00:00
Creation Date	2010-11-02 11:21:20
Producing Software	Adobe PDF library 8.00
Document Lastmod	2011-08-15 15:57:41
Document Title	B319-3D3B-manual-0
Document Creator	Adobe Illustrator CS3

Mini Wireless
Optical Mouse
User's Guide
Introduction
Congratulations on your purchase of the most innovative wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
Battery compartment cover
2 * AAA batteries
Features
2.4GHz (distance 6~8m), 16 Channels/216 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Ergonomic design.
800/1600 dpi switchable.(continue to press the right and middle button at the same time
in 3 seconds to change dpi)
2*AAA Alkaline batteries included.
A wrong battery placement
may cause batteries overheat.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on top case will be flashed when dpi has been
sucessfully swithced.
Pull out the receiver
Mouse
2. Connect the receiver
Wheel button
Receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC.
Low power indicator
Battery cover
ID reset button
Power on/off switch
Receiver
PC
A. Hardware Installation
USB port
1. Insert the batteries
3. Communication : The mouse & the receiver
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.
e. The Low Power LED on the top case will blink 3 seconds if the mouse power is on.
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the commuication channel does not connect well, you can unplug the receiver,
re-plug it back into the USB port on PC, and then within 15 seconds press the ID reset
button on the back of mouse. Now the mouse and the receiver is linked uccessfully.
Note
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
4. Replace the new batteries
Please replace a pair of new batteries and follow the previous instructions. (2, 3)
Note
The red LED on the scroll wheel is the low batteries power indicator. It indicates that
batteries inside the mouse are needed to be replaced.
◎
Trouble Shooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the
computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The
mouse and the receiver
d. If you find the communication channel does not connect well. You can use the software connection tool to re-connect
the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the
package or download from your local brand vendor's website.
e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts,
and change the settings as required.
f. Make sure that you are not working the mouse on glossy or reflective surfaces.
◎
Battery use reminders
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all batteries (used or new) out of the reach of children.
3. To have the batteries with a regular check and replace new batteries if not used for a long time.
4. Never dispose of batteries in fire, as they could explode.
5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with
zinc carbon) will reduce overall performance and could cause leakage or rupture.
6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.
7. Remove batteries from the electrical device if the device is not going to be used for a long time.
8. If the performance of the batteries decreases substantially, it is time to replace the batteries.
FCC statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. (Example-use only
shielded interface cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Modify Date                     : 2011:08:15 15:57:41+08:00
Create Date                     : 2010:11:02 11:21:20+08:00
Metadata Date                   : 2011:08:15 15:57:41+08:00
Creator Tool                    : Adobe Illustrator CS3
Thumbnail Width                 : 256
Thumbnail Height                : 168
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14396 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : B319-3D3B-manual-0
Document ID                     : uuid:d324e64b-68a6-497b-9255-8ae65548b7f3
Instance ID                     : uuid:defb3885-c8e4-4f66-9105-88b6273c4a2a
Rendition Class                 : proof:pdf
Producer                        : Adobe PDF library 8.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 296.333333
Max Page Size H                 : 209.550000
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, Arial-BoldItalicMT, ArialMT, MingLiU, DFHei-Md
Font Family                     : Arial, Arial, Arial, 細明體, DFHei Md-HK-BF
Font Face                       : Bold, Bold Italic, Regular, Regular, Md-HK-BF
Font Type                       : Open Type, Open Type, Open Type, TrueType, Unknown
Font Version                    : Version 3.00, Version 2.90, Version 3.00, Version 7.00, Version 5.00
Font Composite                  : False, False, False, False, False
Font File Name                  : arialbd_0.ttf, arialbi_0.ttf, arial_0.ttf, mingliu.ttc, kaiu.ttf
Plate Names                     : Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 13.0
For                             : user,
Bounding Box                    : 0 0 840 594
Container Version               : 11
Creator Version                 : 15
Image Height                    : 594
Image Width                     : 840
Image Size                      : 840x594
Megapixels                      : 0.499

EXIF Metadata provided by EXIF.tools