ARESON Technology CL0036 Wireless Laser Trackball Mouse User Manual L077LR AIT manual DPI 2

ARESON Technology Corp. Wireless Laser Trackball Mouse L077LR AIT manual DPI 2

User Manual

Wireless TrackballLaser Mouse User's GuideFCC statementThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices).This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation.This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end its life separately from your household waste. There are sparate collection system for recycling in the EU.For more information, please contact the local authority or your retailer where you purchased the product.L077LR+C75CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACEDBY INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.This product uses non-rechargeable Alkaline batteries.
A wrong battery placementmay cause batteries overheat.The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any button of the mouse" is compulsory to wake it up.Power on/off:There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.User can push DPI button to change the resolution. The LEDwill flash when dpi has been sucessfully swithced.a. Remove the battery compartment cover on the bottom case of the mouse.b. Fit in the battery accordingly to the diagram indicated in the battery cabinet.c. Close the battery compartment cover properly.d. Make sure the Power on-off swich on the bottom of the mouse is ON.e. The Low Power LED will be on for 6 seconds when switched to ON.Congratulations on your purchase of this most innovative wireless trackball laser mouse. Equipped with Auto-Speed technology, the mouse can automatically adjust the cursor speed to precisely get to the point you want. Furthermore, just rolling the ball to freely control the cursor movement, no need to move the mouse, can reduce the use of the wrist and the incidence of carpal tunnel syndrome. It offers more advance that will make you more productive and more comfortable. 2.4GHz (distance 6~8m), 16 Channels/224 IDUsing state-of-art technology. High tracking speed and sensitivity.Auto-Speed technology. - automatically adjust your cursor speed to precisely get to the point you want.Ergonomic design to support your hand in comfort.Nano receiver.4-way scrolling.Longer battery life.Auto-Link, Plug and Play! No need to set the channel ID.Power on/off switch.Ergonomic design.Auto-Speed On/Off switchable:Auto-Speed ON 450~1200 dpi / Auto-Speed Off fixed 800 dpi.AA Alkaline battery x 1pc included.ReceiverMouseFeaturesIntroduction Operation2. Connect the receiver1. Insert the batterya. Turn on your PC.b. Connect the receivere to USB port on PC.Power on/o switchReceiverBattery coverPCUSB portPull out the receiver Wheel buttonDpi buttonForward buttonBackward buttonTrackballThis product complies with IEC 60825-1, Class I laser product. The product complies with FCC and CE rules.Safety NoticePlease do NOT direct the laser beam at anyone's eye after the ball is taken out.+-Battery compartment coverAA battery
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the mouse and the receiver auto-communication. 1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.2. Roll the trackball, and the cursor's movement is mapping the trackball movement. Now the mouse and the receiver is auto-linked successfully.3. Communication : The mouse & the receiver Auto-link mode◎ Trouble Shooting◎ Battery use remindersNoteWhile the mouse is working, if encountering any interference, the mouse and the receiver will automatically source out and transfer to another free channel. During the transferring, the cursor movement may have a second delay.NoteThe red LED is the low batteries power indicator. It indicates that batteries inside the mouse are needed to be replaced.4. Replace the new batteryPlease replace a new battery and follow the previous instructions. (2, 3)5. 4-Way Scrolling:a. Vertical ScrollingRoll wheel up to scroll up; roll wheel down to scroll down.b. Horizontal ScrollingHold the wheel to left to scroll left; hold the wheel to right to scroll right. Release wheel to stop scrolling function. NoteThe 4-way scrolling function depends on applications. If the application support the 4-way scrolling function, then the mouse will perform it.6. Red LED IndicatorsPower On / Low Power Indicator will be on for 6 seconds when switched to On. will blink for 6 seconds when in use if the - battery power is low.DPI Indicator flash twice when switched to Auto-Speed ON 450~1200 dpi. flash once when switched to Auto-Speed OFF fixe 800 dpi. Red LED indicator1. Remove worn-out batteries from equipment immediately and dispose of promptly.2. Keep all batteries (used or new) out of the reach of children.3. To have the batteries with a regular check and replace new batteries if not used for a long time.4. Never dispose of batteries in fire, as they could explode.5. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture.6. Remove batteries from the electrical device if the device is not going to be used for a long time.7. If the performance of the batteries decreases substantially, it is time to replace the batteries.a. Make sure you have connected the receiver correctly to the computer's USB port.b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the computer, the computer monitor or external storage drives.c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The mouse and the receiver.d. Restart the mouse by turning it off and then back on.e. Try another USB port.f. Check if the battery is inserted in correct direction.7. Clean the trackballYou may use a pen, through the hole at the mouse bottom, to push out the trackball and clean it.

Navigation menu