ARESON Technology CM0001 Mini Wireless Optical Mouse User Manual B213 3D manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1341855
Application ID	tEqSO+pl34pNP8Oj75JLQQ==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	189.43kB (2367872 bits)
Date Submitted	2010-09-13 00:00:00
Date Available	2010-09-15 00:00:00
Creation Date	2009-08-17 18:30:32
Producing Software	Adobe PDF library 8.00
Document Lastmod	2010-09-07 14:23:06
Document Title	B213-3D-manual-1
Document Creator	Adobe Illustrator CS3

Mini Wireless
Optical Mouse
B253
User's Guide
Introduction
Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
Battery compartment cover
2 * AAA batteries
Features
2.4GHz (distance 6~8m), 16 Channels/ 216 ID.
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Ergonomic design.
800/1600 dpi switchable button.
Rubber side grips and finger grooves.
2*AAA Alkaline batteries included.
A wrong battery placement
may cause battery overheat.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the battery power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
sucessfully switched.
Low power indicator
2. Connect the receiver
Mouse
Wheel button /
Low power indicator
Dpi button
ID reset button
Receiver
a. Turn on your PC.
b. Connect the receiver to USB port on PC.
Pull out the receiver
Receiver
Power on/off switch
Battery cover
release button
PC
A. Hardware Installation
1. Insert the battery
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the battery according to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on/off swich on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will blink 3 seconds if the mouse power is on.
USB port
3. Communication : The mouse & the receiver
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can use the software
connection tool to re-connect the mouse & receiver to reset a new channel ID. You are
able to download the software from your local brand vendor's website.
ID links OK!
Execute ID connection software
Press ID reset button
7. Remove battery from the electrical device if the device is not going to be used for a long time.
8. If the performance of the battery decreases substantially, it is time to replace the battery.
FCC statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
●
Note
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
4. Replace a new battery
Please replace a new battery and follow the previous instructions. (2, 3)
Note
The red LED on the scroll wheel is the low battery power indicator. It indicates that
battery inside the mouse is needed to be replaced.
◎
Troubleshooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical
devices, such as the computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the
Communication:The mouse and the receiver.
d. If you find the communication channel does not connect well. You can use the software connection
tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software
from the included diskette of the package or download from your local brand vendor's website.
e. Make sure that you are not working the mouse on glossy or reflective surfaces.
◎
Battery use reminders
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all battery (used or new) out of the reach of children.
3. To have the battery with a regular check and replace a new battery if not used for a long time.
4. Never dispose of battery in fire, as it could explode.
5. Do not use the wrong type of battery (e.g. Ni MH, NiCd, and etc) in the mouse.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. (Example-use only
shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits sent forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:09:07 14:23:06+08:00
Create Date                     : 2009:08:17 18:30:32+08:00
Metadata Date                   : 2010:09:07 14:23:06+08:00
Creator Tool                    : Adobe Illustrator CS3
Thumbnail Width                 : 256
Thumbnail Height                : 168
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13914 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : B213-3D-manual-1
Document ID                     : uuid:e22f8748-1b9b-47e3-9d5e-0a0d644f3b3b
Instance ID                     : uuid:7b5d0848-7479-4742-af0b-7887783fa315
Producer                        : Adobe PDF library 8.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 296.333333
Max Page Size H                 : 209.550000
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldItalicMT, Arial-BoldMT, ArialNarrow, ArialMT, Arial-Black
Font Family                     : Arial, Arial, Arial, Arial, Arial
Font Face                       : Bold Italic, Bold, Narrow, Regular, Black
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 2.90, Version 3.00, Version 2.37, Version 3.00, Version 2.40
Font Composite                  : False, False, False, False, False
Font File Name                  : ARIALBI.TTF, ARIALBD.TTF, ARIALN.TTF, ARIAL.TTF, ariblk.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : 白色, 黑色, 80% 黑色, 60% 黑色, 40% 黑色, 20% 黑色, 紅色 M=100 Y=100, 75% 紅色 M=75 Y=75, 50% 紅色 M=50 Y=50, 25% 紅色 M=25 Y=25, 綠色 C=80 Y=100, 75% 綠色 C=60 Y=75, 50% 綠色 C=40 Y=50, 25% 綠色 C=20 Y=25, 藍色 C=100 M=50, 75% 藍色 C=75 M=37.5, 50% 藍色 C=50 M=25, 25% 藍色 C=25 M=12.5, 橘色 M=50 Y=100, 75% 橘色 M=37.5 Y=75, 50% 橘色 M=25 Y=50, 25% 橘色 M=12.5 Y=25, 紫色 C=50 M=90, 75% 紫色 C=37.5 M=67.5, 50% 紫色 C=25 M=45 , 25% 紫色 C=12.5 M=22.5, 天藍色 C=80, 75% 天藍色 C=60, 50% 天藍色 C=40, 25% 天藍色 C=20, 黃色, 75% 黃色, 50% 黃色, 25% 黃色, AutoCAD Color
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001, 60.000002, 39.999998, 19.999999, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 92.941201
Swatch Colorant Magenta         : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 50.000000, 37.500000, 25.000000, 12.500000, 90.000004, 67.500001, 44.999999, 22.500002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 87.843102
Swatch Colorant Yellow          : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 89.019603
Swatch Colorant Black           : 0.000000, 100.000000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001
Swatch Colorant Tint            : 100.000000
Has XFA                         : No
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 13.0
For                             : user,
Bounding Box                    : -36 -632 878 36
Container Version               : 11
Creator Version                 : 13

EXIF Metadata provided by EXIF.tools