ARESON Technology DL0003 Wireless Bluetooth Laser Mouse User Manual L122BT EN manual cover
ARESON Technology Corp. Wireless Bluetooth Laser Mouse L122BT EN manual cover
Usr man
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1175915 |
| Application ID | g+RkjGth8j26Nvxgk95umw== |
| Document Description | Usr man |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 222.54kB (2781749 bits) |
| Date Submitted | 2009-09-28 00:00:00 |
| Date Available | 2009-09-28 00:00:00 |
| Creation Date | 2009-02-12 12:00:23 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2009-09-28 10:25:44 |
| Document Title | L122BT-EN-manual-cover |
| Document Creator | Adobe Illustrator CS3 |
Battery use reminders 1. Remove worn-out batteries from equipment immediately and dispose of promptly. 2. Keep all batteries (used or new) out of the reach of children. 3. To have the batteries with a regular check and replace new batteries if not used for a long time. 4. Never dispose of batteries in fire, as they could explode. 5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture. 6. Do not mix different types of batteries (e.g. Ni-MH, NiCd, alkaline, and etc) in the mouse. 7. Remove batteries from the electrical device if the device is not going to be used for a long time. 8. If the performance of the batteries decreases substantially, it is time to replace the batteries. Mini Bluetooth Laser Mouse FCC statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices). Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Hereby, Areson Technology Corp., declares that this L168BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end its life separately from your household waste. There are sparate collection system for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. L168BT User's Guide Introduction A. Hardware Installation Congratulations on your purchase of the most innovative bluetooth mini mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. 1. Insert the batteries Safety Notice This product complies with IEC 60825-1, Class I laser product. (for Laser mouse models only.) The product complies with FCC and CE rules. a. Remove the battery compartment cover on the bottom case of the mouse. b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet. c. Close the battery compartment cover properly. d. Make sure the Power on-off swich on the bottom of the mouse is ON. e. The Low Power LED on the top case will blink 3 seconds if the mouse power is on. AAA batteries Battery compartment cover A wrong battery placement may cause batteries overheat. Please DO NOT direct the laser beam at anyone's eyes. Features 2.4GHz Bluetooth RF (distance : 10m, in open site) Using state-of-art technology. High tracking speed and sensitivity. 79 Channels Power on/off switch 2*AAA Alkaline batteries included 1600 dpi (laser) or 800 dpi (optical) The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any button of the mouse" is compulsory to wake it up. Power on/off: Power on/off switch is designed to save the batteries power while non-usage of a longer period. Make sure that you are not working the mouse on glossy or reflective surfaces. Nota 2. Bluetooth Pairing This Product doesn’t include Bluetooth dongle. The mouse easily connects to notebooks built in Bluetooth technology. The mouse also can be connected to Bluetooth dongle through your Bluetooth dongle driver, it is not guaranteed 100% compatile. a. Turn on your PC. b. Insert battery properly ( please refer to ”A. Hardware Installation” & ”Insert the batteries” ) make sure that mouse is in power on status. Push ID Button to enter connecting status, and wheel LED will be flashing slowly. Mouse Wheel button Low power indicator Battery cover ID reset button Power on/off switch PC ID reset button c. Click “Bluetooth icon” to open Bluetooth device in control panel or toolbar g. please tick “ Don’t use a passkey ” and click “ Next ” d..Click “ add “ h.Now Bluetooth device is in connecting status. e. Please tick “ My device is set up and ready to found ” and click “ Next ” i. System will show installment finished in dialogue box, then click “ finish”. f. Choose “ Bluetooth Mouse New Device” and click “Next ” PC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Modify Date : 2009:09:28 10:25:44+08:00 Create Date : 2009:02:12 12:00:23+08:00 Metadata Date : 2009:09:28 10:25:44+08:00 Creator Tool : Adobe Illustrator CS3 Thumbnail Width : 256 Thumbnail Height : 184 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11907 bytes, use -b option to extract) Format : application/pdf Title : L122BT-EN-manual-cover Document ID : uuid:3f40293c-38d5-47bc-b17e-a00d30228126 Instance ID : uuid:784dce0e-0ebb-4f4d-8457-df424dd7d4a1 Producer : Adobe PDF library 8.00 N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 296.333333 Max Page Size H : 209.550000 Max Page Size Unit : Millimeters Font Name : Arial-BoldMT, Arial-BlackItalic, Arial-BoldItalicMT, ArialMT, Arial-ItalicMT Font Family : Arial, Arial Black, Arial, Arial, Arial Font Face : Bold, Italic, Bold Italic, Regular, Italic Font Type : Open Type, TrueType, Open Type, Open Type, Open Type Font Version : Version 3.00, Version 1.00, Version 2.90, Version 3.00, Version 2.90 Font Composite : False, False, False, False, False Font File Name : ARIALBD.TTF, ARBLI___.TTF, ARIALBI.TTF, ARIAL.TTF, ARIALI.TTF Plate Names : Black Swatch Group Name : 預設色票群組 Swatch Group Type : 0 Page Count : 3 Creator : Adobe Illustrator(R) 13.0 For : user, Bounding Box : 0 0 840 594 Creator Version : 13 Container Version : 11 Image Height : 594 Image Width : 840 Image Size : 840x594 Megapixels : 0.499EXIF Metadata provided by EXIF.tools