ARRIS Global PX032ANI D890 HD TV Set Top Box User Manual Manual

Pace Micro Technology plc D890 HD TV Set Top Box Manual

Manual

BRINGING TECHNOLOGY HOME
www.pace.com
USER GUIDE
Pace Xi3-P
(PX032ANI)
FIRST DRAFT
2
Xi3 (PX032ANI) USER GUIDE (501-3410500)
CONTENTS
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
CableCARD™ is a trademark of Cable Television Laboratories, Inc.
Other trademarks listed herein are the property of their respective owners.
© 2013 Pace plc. All rights reserved. Pace and are trademarks and/or registered trademarks of Pace plc
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Rovi corporation, and is intended for home and other limited
pay-per-view uses only unless otherwise authorized by Rovi corporation. Reverse engineering or disassembly is prohibited.
SAFETY INFORMATION ..................................................................................................3
Other warnings .......................................................................................................... 3
Caution ......................................................................................................................3
Installation .................................................................................................................3
IMPORTANT SAFETY INSTRUCTIONS ....................................................................... 3
Warnings on your set-top box ...................................................................................3
Safety aspects of connections ...................................................................................5
Regulatory information .............................................................................................. 5
REAR PANEL .................................................................................................................. 6
CONNECTING THE EQUIPMENT.....................................................................................7
Setup - HDTV (HDMI connection)..............................................................................8
Connecting the power cord to your set-top box.........................................................9
Connecting equipment to the wall AC outlets ............................................................9
Turning your set-top box on and off ..........................................................................9
Lightning storms .......................................................................................................9
Power light and Power button ...................................................................................9
REMOTE CONTROL ......................................................................................................10
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) ................................11
FIRST DRAFT
3
Xi3 (PX032ANI) USER GUIDE (501-3410500)
SAFETY INFORMATION
This digital set-top box has been manufactured and tested with your safety
in mind. However, improper use can result in potential electric shock,
property damage or fire hazards. To avoid defeating the safeguards that
have been built into your set-top box, please observe the precautions
discussed in this document.
Other warnings
To reduce the risk of electric shock, do not remove the cover of your set-
top box. There are no user-serviceable parts inside it.
Do not perform any servicing unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing the set-top box yourself
will invalidate the warranty.
To reduce the risk of fire or electric shock, do not expose this set-top box
to rain or moisture.
Caution
Do not attempt to modify your set-top box without written authorization
from the manufacturer. Unauthorized modification could void your
authority to operate your set-top box.
Failure to heed the Safety Information provided by failing to connect to a
properly wired outlet may void the manufacturer’s warranty.
Installation
The installation of your set-top box should be carried out by a qualified
installer and should conform to local codes.
Note to the installer
This reminder is provided to call the attention of the cable-TV-system
installer to Section 820 of the National Electrical Code (USA), which
provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as is practical.
IMPORTANT SAFETY INSTRUCTIONS
Before you install or use the apparatus, you must read and
understand these Important Safety Instructions.
At all times when using the apparatus you must follow
these Important Safety Instructions to reduce the risk of fire,
electrical shock and injury to persons.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into the outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Service address:
Pace Americas Inc.
3701 FAU Boulevard, Suite 200, Boca Raton, Florida 33431 U.S.A.
The lightning flash with arrowhead symbol, within a triangle,
is intended to alert you to the presence of uninsulated
“dangerous” voltages within your set-top box’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a triangle is intended to alert
you to the presence of important instructions in the literature
accompanying your set-top box.
Warnings on your set-top box
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
FIRST DRAFT
4
Xi3 (PX032ANI) USER GUIDE (501-3410500)
SAFETY INFORMATION (cont.)
In addition to the Important Safety Instructions, please read the Safety
Information below.
Power sources
The model number, serial number, and electrical rating of this set-top box
are on a label on its base.
You must operate your set-top box only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company. If you
move your set-top box between locations at different temperatures, allow it
to reach room temperature before you apply power to it.
Overloading
Do not overload wall AC outlets, extension cords or other power outlets as
this can result in a risk of fire or electric shock.
To avoid possible damage to your set-top box or to a connected TV or
component, all AC power cords must be plugged into properly wired
outlets. As with all electrical products, connection to faulty or defective
components, or the failure to connect your set-top box to a properly wired
outlet, may cause sparking, property damage or damage to any TV or other
component connected to your set-top box and pose a fire hazard.
Lightning
For added protection for your set-top box during a lightning storm, or when
it is left unattended and unused for long periods of time, disconnect your
set-top box from the power supply and disconnect the cable system from
your set-top box. See also item 13 in the Important Safety Instructions.
Ambient temperature
The operating temperature range of your set-top box is 32-104°F. If the
ambient temperature around your set-top box falls outside this range, you
must correct this in order for your set-top box to work correctly and safely.
For example, if the temperature is too high, make sure there is sufficient
ventilation (see below) and that your set-top box is not directly on top of or
underneath other equipment.
Ventilation
Slots and openings in the casing of your set-top box are provided for
ventilation, to ensure reliable operation of your set-top box and to protect it
from overheating.
Never block the ventilation
openings by placing your set-
top box on a bed, sofa, rug, or
other similar surface. Place it
on a hard, flat surface.
Never cover the ventilation
openings with items such as
newspapers, tablecloths, or
curtains.
You can place your set-top
box near other consumer
electronics devices, such as
stereo amplifiers or televisions,
but you must not place it directly on top or underneath them.
3 in.
3 in.
3 in.
Do not place your set-top box in a built-in installation such as a
bookcase or rack unless proper ventilation is provided and you have
adhered to the manufacturer’s instructions.
Maintain a minimum distance of three inches around your
set-top box for sufficient ventilation.
See also item 7 in the Important Safety Instructions.
Water and moisture
Do not expose your set-top box to rain or moisture, dripping or splashing,
and ensure that no objects filled with liquids, such as vases, are placed on
your set-top box. See also item 5 in the Important Safety Instructions.
Entry of objects and liquids
Never push objects of any kind into your set-top box through openings
as they may touch dangerous voltage points or short-out parts that could
result in fire or electric shock. Never spill liquid of any kind on your set-
top box.
Transporting
Move the combination of set-top box and cart with care. Quick stops,
excessive force and uneven surfaces may cause the combination of
set-top box and cart to overturn. See also item 12 in the Important Safety
Instructions.
Placement and mounting
Do not place your set-top box on an unstable or uneven surface. Your
set-top box may fall, causing serious injury to a child or adult and serious
damage to your set-top box. If you mount your set-top box, for example
to a wall or ceiling, follow the manufacturer’s instructions and use a
mounting accessory recommended by the manufacturer. See also item 12
in the Important Safety Instructions.
Risk of fire or scorching
Never place naked flame sources, such as lighted candles, on or adjacent
to your set-top box.
Replacement parts
When replacement parts are required, be sure that the service technician
has used replacement parts specified by the manufacturer or that have
the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards. See also item 14 in the
Important Safety Instructions.
Safety check
Upon completion of any servicing or repairs to your set-top box, ask the
service technician to perform safety checks to determine that your set-top
box is in its proper operating condition. See also item 14 in the Important
Safety Instructions.
SAVE THIS INFORMATION FOR FUTURE REFERENCE
FIRST DRAFT
5
Xi3 (PX032ANI) USER GUIDE (501-3410500)
Serial No: PADA00000001
CCS1234N12345678
CCS1234N12345678
DM MAC: 11:22:33:44:55:1A
Serial No: PADA00000001
CCS1234N12345678
CCS1234N12345678
DM MAC: 11:22:33:44:55:1A
Safety aspects of connections
Full details of the rear panel are on page 6.
Connecting
Do not connect your set-top box (or any other equipment such as a TV or
VCR) to the power supply until you have properly connected all the other
cables.
Your set-top box operates with an AC power supply voltage, as shown on
a label on the base of your set-top box. Do not connect your set-top box to
a DC supply or to any other power supply.
This set-top box is equipped with a two-wire power cord, with a polarized
plug at one end. The other end of the cord is fitted with a polarized
connector, which is shaped such that it can be fitted only one way into the
power input connector of your set-top box. Connect this end first, before
inserting the polarized plug into the wall AC outlet.
Disconnecting
Disconnect your set-top box from the AC power supply before you
disconnect any other equipment from its rear panel.
The only way to disconnect your set-top box from the AC power supply
is to remove the power cord from the wall AC outlet. Therefore, you must
install your set-top box near to the wall AC outlet, which should be easily
accessible.
If you are in any doubt about the power supply cord, its plug or its
connection, or are not certain that the electrical outlets you are using
are properly wired and grounded, consult a qualified electrician before
proceeding any further.
SAFETY INFORMATION (cont.)
The CABLE IN connector is designed
for connection to a cable network only.
You must not connect any other
equipment, such as a VCR, to this
input.
POWER INPUT
Regulatory information
NOTE
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
MPE/SAR/RF Exposure Information.
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
This equipment was verified for RF exposure and found to comply with
Council Recommendation 1999/519/EC and FCC OET-65 RF exposure
requirements.
WARNING: While this equipment is in operation, a separation distance
of at least 20 centimeters (equal to 8 inches) must be maintained
between the antenna inside the equipment and the bodies of all
persons exposed to the antenna in order to meet the FCC RF exposure
guidelines. Making changes to the antenna or the equipment is not
permitted. Doing so may result in the equipment exceeding the FCC
RF exposure guidelines. This equipment must not be co-located or
operated in conjunction with any other antenna or radio transmitter.
FIRST DRAFT
6
Xi3 (PX032ANI) USER GUIDE (501-3410500)
REAR PANEL
Serial No: PADA00000001
CCS1234N12345678
CCS1234N12345678
DM MAC: 11:22:33:44:55:1A
Cable In
From cable
service-provider
Power
(Make this
connection
last of all)
HDMI OUT
HDMI video and
audio output
USB
For future use
HDMI IN
HDMI ® video and
audio input (behind
removable label cover)
CABLE IN Connect the cable service here.
HDMI IN Connect another optional HDMI devices (allowing the devices’ outputs to loop through your set-top box to the TV).
HDMI OUT Connect to the HDMI input on your HDTV.
USB For future use
INSTANT REPLAY Insert Instant Replay card (if used) here.
POWER Connect your set-top box to the AC power supply unit here. Make this connection last of all.
INSTANT REPLAY
For Instant Replay card
FIRST DRAFT
7
Xi3 (PX032ANI) USER GUIDE (501-3410500)
WARNINGS
Do not connect your set-top box (or any other equipment such as a TV or DVD player) to the power
supply until you have properly connected all the other cables.
Disconnect your set-top box from the AC power supply before you disconnect any other equipment from its
rear panel.
The only way to disconnect your set-top box from the AC power supply is to remove the AC power cord (or
switch the wall AC outlet switch, if present, to its OFF position). Your set-top box must therefore be installed
near the wall AC outlet, which should be easily accessible.
The cable input is designed for connection to a cable network only. You must not connect any other
equipment, such as a VCR, to this input.
Possible setups
In order for you to view programs broadcast in high-definition, your set-top box must be connected to a
suitable HDTV or computer monitor.
Your equipment should have been connected up by your installer. However, if you need to disconnect and
reconnect your equipment, read page 8.
The setup shown on page 8 makes efficient use of the connectors on your set-top box. However, depending
on your other equipment and the connectors on it, the person who installed your system may have chosen to
connect things differently.
CONNECTING THE EQUIPMENT
NOTE
Copy protection via an HDMI secure link
The HDMI link between your set-top box and your HDTV should be a secure link. When your set-top
box is attached via an HDMI cable to an HDCP-compliant (High-bandwidth Digital Content Protection)
HDTV, the HDTV and set-top box negotiate a secure link, which allows your set-top box to transmit full
resolution video (picture) to your HDTV.
Not all HDTVs support HDCP. If your set-top box is connected to an HDTV that does not support it, the
following may be displayed:
Your HDTV does not support HDCP.
Please use the YPbPr component connection to watch TV.
The HDMI output is then disabled, so no picture is transmitted from this connector.
FIRST DRAFT
8
Xi3 (PX032ANI) USER GUIDE (501-3410500)
CONNECTING THE EQUIPMENT (cont.)
Serial No: PADA00000001
CCS1234N12345678
CCS1234N12345678
DM MAC: 11:22:33:44:55:1A
Serial No: PADA00000001
CCS1234N12345678
CCS1234N12345678
DM MAC: 11:22:33:44:55:1A
HDMI
HDTV
POWER
HDMI
HDTV
POWER
PX001ANM
SET-TOP
ROOM 1
PX032ANI
SET-TOP
PX032ANI
SET-TOP
WALL AC OUTLET
CABLE
INPUT
WALL AC OUTLET
WALL AC OUTLET
WALL
CABLE
OUTLET
ROOM 2
WALL
CABLE
OUTLET
HDMI
HDTV
POWER
WALL AC OUTLET
ROOM 3
WALL
CABLE
OUTLET
WALL AC OUTLET WALL AC OUTLET
NOTE
This diagram shows power cords that have 2-blade polarized plugs. You may need to use a different type
of plug in the region where you live.
Setup - HDTV (HDMI connection)
This setup uses an HDMI connector to connect to the HDTV. This displays the highest quality picture on your HDTV and also means there will be no
picture degradation on any copy-protected programs (provided the link remains secure – see page 7).
FIRST DRAFT
9
Xi3 (PX032ANI) USER GUIDE (501-3410500)
CONNECTING THE EQUIPMENT (cont.)
WARNINGS
Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until
you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety.
Connecting the power cord to your set-top box
Before you connect your set-top box to a wall AC outlet, connect the polarized socket on your set-top box’s
power cord into the POWER connector on your set-top box’s rear panel.
Connecting equipment to the wall AC outlets
Connect the polarized plugs on the power cords from your set-top box, TV, and any other equipment into wall
AC outlets. If these outlets have switches, switch them ON.
Turning your set-top box on and off
After you have connected your set-top box to the wall AC outlet (and switched this outlet ON, if it has a
switch), the Power light should light up, to show that your set-top box is on.
To turn your set-top box on or off at any time, press the Power button on your set-top box or remote
control (see also page 10, for information on your remote control).
Never turn off your set-top box by simply disconnecting it from the AC power supply. If you need to disconnect
your set-top box, turn it off by pressing the Power button on your set-top box or remote control, so that
the Power light goes red. Then wait a few seconds before removing your set-top box from the wall AC outlet.
Lightning storms
Disconnect your set-top box’s power cord during lightning storms. A lightning storm may affect your set-top
box, if it is on during the storm. It may appear that it has stopped working, but you can easily restore its
operation as follows:
Unplug your set-top box from the wall AC outlet. Then plug it in again at the wall AC outlet (and, if there is a
switch by this outlet, switch it to its ON position).
Power light and Power button
The Power light
To turn your set-top box on or off,
press the Power button.
NOTES
Your cable TV service-provider
determines the digital channels,
services, and screen information
that you see on your TV when you
use your set-top box and its remote
control.
Consult the information supplied
by your cable service-provider for
details on how to make the most of
the digital cable services. Also read
the operating instructions that are
supplied with your remote control.
Power Saving: To save power
and money, and to reduce
greenhouse gas emissions,
turn off your set-top box, using
the Power button, when it is not
in use.
FIRST DRAFT
10
Xi3 (PX032ANI) USER GUIDE (501-3410500)
REMOTE CONTROL
Rew, Play/Pause, FF, Stop
Controls On Demand or DVR viewing: rewind, play,
pause, fast-forward, and stop.
Replay
Jumps back 15 seconds within an On Demand or DVR
program.
Rec
Records content currently being viewed.
Note: Some features above require a DVR Set-Top Box
and/or access to On Demand programming.
xnity Menu
Displays the on-screen guide menus.
Guide
Displays the TV Listings.
OK
Selects the highlighted item within the guide.
Last
Returns to the previous channel or guide screen.
Info
Displays a description of a program.
Exit/Stop
Exits guide screens and returns you to TV viewing.
A B C D
Context-sensitive control keys used in advanced
setups.
0-9
Use to select the channel you want to view.
Setup
Programs your remote control to your TV, or set-top
box.
Using Your Remote Control
Place the batteries (supplied) into your remote control. After you install your set-top box, the only way to change channel is with the
supplied remote control.
Make sure there is nothing blocking the path from your remote control to your set-top box’s front panel. You can “pair” the remote
control and set-top box. This enables the remote control to operate your set-top box if your set-top box is hidden from view. For more
information, consult the instructions supplied with your remote control.
TV Power
Turns your TV ON or OFF.
All Power
Turns both the TV and set-top box ON or OFF.
VOL +/-
Turns the volume up and down
CH /
Selects the next higher or lower channel.
Mute
Turns the sound on or off.
FIRST DRAFT
11
Xi3 (PX032ANI) USER GUIDE (501-3410500)
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”)
THE PRODUCT TO WHICH THESE TERMS RELATE (THE “PRODUCT”) INCORPORATES SOFTWARE WHICH IS OWNED BY PACE
plc (“PACE”) OR ITS THIRD PARTY LICENSORS (THE “SOFTWARE”). BEFORE USING THE PRODUCT PLEASE READ THESE
TERMS. IF YOU DO NOT AGREE TO THESE TERMS YOU MAY NOT USE THE PRODUCT AND SHOULD IMMEDIATELY RETURN
THE PRODUCT TO YOUR SUPPLIER. THESE TERMS ALSO APPLY TO ANY MODIFICATIONS, UPDATES OR SUPPLEMENTS TO
THE SOFTWARE PROVIDED TO YOU. FOR PURPOSES OF THESE TERMS, “YOU” MEANS YOU, THE END USER, AND YOUR
PRODUCT SUPPLIER, UNLESS THE CONTEXT REQUIRES OTHERWISE.
A. License Grant and Conditions
1. Pace, or your supplier, if applicable, grants you a non-exclusive, non-transferable, limited license to use the Software solely
as integrated with, incorporated into, or provided for use in connection with the Product.
2. Pace reserves all rights not expressly granted to you under these Terms.
3. You may not transfer any of your limited rights in the Software without the prior written consent of Pace, and if consent
is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND ONLY IF the
transferee has read and agreed to accept these Terms.
4. You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not
altered or removed.
5. The Software is protected by copyright and other laws and international copyright and other treaties.
6. The Software provided hereunder is licensed (not sold). Pace is NOT transferring title or any ownership rights in the Software
to you.
7. All title and intellectual property rights in and to the Software and all modifications, updates, enhancements and derivative
works of the Software are owned exclusively by Pace or its licensors and you agree to execute any document reasonably
requested by Pace to evidence such ownership rights.
8. Certain third party software used in connection with the Product may be made directly available to you by operating system
or other third party providers. Use of such Software is also subject to the terms of any applicable agreement between you and
such third party.
B. License Restrictions
Except as expressly permitted herein or by statute you may not:
1. use the Software in conjunction with any other hardware or equipment other than the Product;
2. copy or modify all or any portion of the Software;
3. incorporate all (or any portion of) the Software into other programs developed or used by (or on behalf of) you;
4. reverse engineer, decompile, decrypt or disassemble the Software (or any portion of the Software); or
5. export, transfer or re-export the Software in violation of any applicable law.
C. Open Source Software
Certain components of the Software are subject to either:
(i) the GNU General Public Licence (“GPL”);
(ii) the GNU Lesser General Public Licence (“LGPL”); or
(iii) OpenSSL license.
The foregoing are not subject to the restrictions in Section B. In compliance with the GPL and LGPL Pace makes the source code
of the Linux software, libraries and associated utilities it uses, together with its modifications (if any), available to the public in
source code form at: http://www.pace.com/opensource/request.
You are free to use, modify and distribute the Linux software and any modifications as long as you comply with the terms of the
GPL or LGPL referred to above. The License terms applicable to (i) to (iii) above are available to you, as explained in the section
below entitled Open Source Licenses.
The Software also contains the following:
(iv) SHA library Copyright © 2000-2001, Aaron D. Gifford All rights reserved.
(v) Expat XML Parsing Library
Copyright © 1998, 1999, 2000 Thai Open Source Software Centre Ltd and Clark Cooper.
Copyright © 2001, 2002, 2003 Expat maintainers.
(vi) Expat++ This component of the Software is subject to the Mozilla Public License Version 1.0.
(vii) Base64 Algorithm Copyright © 2001 Bob Trower, Trantor Standard Systems Inc.
Certain additional license terms applicable to (iv) to (vi) above are available to you, as explained in the section below entitled Open Source
Licenses.
FIRST DRAFT
12
Xi3 (PX032ANI) USER GUIDE (501-3410500)
D. Termination
These Terms are effective until terminated. You may terminate these Terms by returning the Product to your supplier. These Terms
will terminate automatically without notice if you fail to comply with these Terms or any other written agreement between you and
Pace. Upon termination you must return the Product to your supplier.
E. Disclaimer
1. EXCEPT AS SET FORTH IN ANY WRITTEN AGREEMENT BETWEEN YOU AND PACE (OR YOUR SUPPLIER), THE SOFTWARE
IS (TO THE EXTENT PERMITTED BY LAW) SUPPLIED “AS IS” AND PACE AND ITS LICENSORS EXPRESSLY EXCLUDE
ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) WARRANTIES OF MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR PURPOSE AND NON-INFRINGEMENT.
2. EXCEPT AS SET FORTH IN ANY WRITTEN AGREEMENT BETWEEN YOU AND PACE, IN NO CIRCUMSTANCE WILL PACE BE
LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, PUNITIVE OR INCIDENTAL DAMAGE (INCLUDING LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA OR THE COST OF PROCUREMENT OF SUBSTITUTE GOODS,
TECHNOLOGY OR SERVICES) ARISING OUT OF THE USE OR THE INABILITY TO USE THE SOFTWARE.
F. General
These Terms are governed by the laws of the State of New York and you may only bring claims exclusively in New York courts and
Pace shall be entitled to bring a claim in the courts of any jurisdiction. Any failure by Pace to enforce any of its rights hereunder
or applicable law shall not constitute a waiver of such rights. Pace’s licensors and suppliers shall be third party beneficiaries of
this License Agreement, as applicable.
YOUR USE OF THE PRODUCT CONSTITUTES YOUR ACKNOWLEDGEMENT THAT YOU HAVE READ THESE TERMS AND AGREE
TO BE BOUND HEREBY.
Open Source Licenses
The software contained in this product may be covered by certain components consisting of free software or open source software.
A list of these components and a copy of the relevant copyright notices and license term notices that are required by such licenses
are available at this web page:
http://www.pace.com/opensource/license
This list may change from time to time and may depend on the model of product or the version of software you have received. If
you are unable to access this web page and wish to have a copy of this list, please contact the Open Source Administrator at: 3701
FAU Boulevard, Suite 200, Boca Raton, Florida 33431 USA. To the extent the terms of these open source or free software licenses
prohibit any of the restrictions in any end user license included with the product, such restrictions will not apply to the applicable
open source or free software component.
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) (cont.)
FIRST DRAFT
501-3410500
Pace and are trademarks and/or registered trademarks of Pace plc.
www.pace.com
FIRST DRAFT

Navigation menu