ARRIS Global PX051AEI IP Client Set Top Box User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3023693
Application ID	DvFKkek0fnNNqxzMhGB7Cg==
Document Description	USER MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	95.35kB (1191863 bits)
Date Submitted	2016-06-10 00:00:00
Date Available	2016-12-07 00:00:00
Creation Date	2016-02-08 10:22:17
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-02-08 10:22:22
Document Title	USER MANUAL
Document Creator	Adobe InDesign CC 2015 (Macintosh)

USER GUIDE
Pace Xi5
PX051AEI
BRINGING TECHNOLOGY HOME
www.pace.com
CONTENTS
SAFETY INFORMATION................................................................................................... 3
IMPORTANT SAFETY INSTRUCTIONS............................................................................ 3
Safety aspects of connections.................................................................................... 5
Regulatory information............................................................................................... 5
REAR PANEL and BASE.................................................................................................. 6
FRONT PANEL and TOP COVER...................................................................................... 7
CONNECTING THE EQUIPMENT..................................................................................... 8
Typical setup............................................................................................................... 8
Connecting your equipment........................................................................................ 9
Connecting the power supply unit to your set-top box............................................. 10
Connecting equipment to the wall AC outlets........................................................... 10
Turning your set-top box on and off......................................................................... 10
Lightning storms...................................................................................................... 10
Starting the WiFi connection..................................................................................... 11
Regulatory information for WiFi............................................................................... 11
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”)................................. 12
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Rovi corporation, and is intended for home and other limited
pay-per-view uses only unless otherwise authorized by Rovi corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
COMCAST, the COMCAST logo, XFINITY and the XFINITY logo are all trademarks or service marks of Comcast Corporation or its subsidiaries.
All other trademarks and service marks appearing herein are the properties of their respective owners.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Other trademarks listed herein are the property of their respective owners.
© 2016 Pace plc. All rights reserved. Pace and
are trademarks and/or registered trademarks of Pace plc
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
SAFETY INFORMATION
This digital set-top box has been manufactured and tested with your safety
in mind. However, improper use can result in potential electric shock,
property damage or fire hazards. To avoid defeating the safeguards that
have been built into your set-top box, please observe the precautions
discussed in this document.
Warnings on the power supply unit
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
Before you install or use the apparatus, you must read and
understand these Important Safety Instructions.
At all times when using the apparatus you must follow
these Important Safety Instructions to reduce the risk of fire,
electrical shock and injury to persons.
1. Read these instructions.
2. Keep these instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3. Heed all warnings.
The lightning flash with arrowhead symbol, within a triangle,
is intended to alert you to the presence of uninsulated
“dangerous” voltages within your power supply unit’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within a triangle is intended to alert
you to the presence of important instructions in the literature
accompanying your set-top box.
To ensure correct operation, use this set-top box only with the Paceapproved power supply unit provided. If you use an unapproved
alternative, you will invalidate the warranty.
Other warnings
To reduce the risk of electric shock, do not remove the cover of your settop box. There are no user-serviceable parts inside it.
Do not perform any servicing unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing the set-top box yourself
will invalidate the warranty.
To reduce the risk of fire or electric shock, do not expose this set-top box
to rain or moisture.
Caution
Do not attempt to modify your set-top box without written authorization
from the manufacturer. Unauthorized modification could void your
authority to operate your set-top box.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into the outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Failure to heed the Safety Information provided by failing to connect to a
properly wired outlet may void the manufacturer’s warranty.
Installation
The installation of your set-top box should be carried out by a qualified
installer and should conform to local codes.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Service address:
Pace Americas Inc.
3701 FAU Boulevard, Suite 200, Boca Raton, Florida 33431 U.S.A.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
SAFETY INFORMATION (cont.)
In addition to the Important Safety Instructions, please read the Safety
Information below.
Power sources
The model number, serial number, and electrical rating of this set-top box
are on a label on its base.
You must operate your set-top box only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company. If you
move your set-top box between locations at different temperatures, allow it
to reach room temperature before you apply power to it.
Overloading
Do not overload wall AC outlets, extension cords or other power outlets as
this can result in a risk of fire or electric shock.
To avoid possible damage to your set-top box or to a connected TV or
component, all AC power cords must be plugged into properly wired
outlets. As with all electrical products, connection to faulty or defective
components, or the failure to connect your set-top box to a properly wired
outlet, may cause sparking, property damage or damage to any TV or other
component connected to your set-top box and pose a fire hazard.
Lightning
For added protection for your set-top box during a lightning storm, or when
it is left unattended and unused for long periods of time, disconnect your
set-top box from the power supply and disconnect the cable system from
your set-top box. See also item 13 in the Important Safety Instructions.
Ambient temperature
The operating temperature range of your set-top box is 32-104°F. If the
ambient temperature around your set-top box falls outside this range, you
must correct this in order for your set-top box to work correctly and safely.
For example, if the temperature is too high, make sure there is sufficient
ventilation (see below) and that your set-top box is not directly on top of or
underneath other equipment.
Ventilation
Slots and openings in the casing of your set-top box are provided for
ventilation, to ensure reliable operation of your set-top box and to protect it
from overheating.
• Never block the ventilation
openings by placing your set-top
box on a bed, sofa, rug, or other
similar surface. Place it on a
hard, flat surface.
• Never cover the ventilation
openings with items such as
newspapers, table-cloths, or
curtains.
• Do not place your set-top box in a built-in installation such as a
bookcase or rack unless proper ventilation is provided and you have
adhered to the manufacturer’s instructions.
• Maintain a minimum distance of three inches around your
set-top box for sufficient ventilation.
See also item 7 in the Important Safety Instructions.
Water and moisture
Do not expose your set-top box to rain or moisture, dripping or splashing,
and ensure that no objects filled with liquids, such as vases, are placed on
your set-top box. See also item 5 in the Important Safety Instructions.
Entry of objects and liquids
Never push objects of any kind into your set-top box through openings
as they may touch dangerous voltage points or short-out parts that could
result in fire or electric shock. Never spill liquid of any kind on your settop box.
Transporting
Move the combination of set-top box and cart with care. Quick stops,
excessive force and uneven surfaces may cause the combination of
set-top box and cart to overturn. See also item 12 in the Important Safety
Instructions.
Placement and mounting
Do not place your set-top box on an unstable or uneven surface. Your
set-top box may fall, causing serious injury to a child or adult and serious
damage to your set-top box. If you mount your set-top box, for example
to a wall or ceiling, follow the manufacturer’s instructions and use a
mounting accessory recommended by the manufacturer. See also item 12
in the Important Safety Instructions.
Risk of fire or scorching
Never place naked flame sources, such as lighted candles, on or adjacent
to your set-top box.
Replacement parts
When replacement parts are required, be sure that the service technician
has used replacement parts specified by the manufacturer or that have
the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards. See also item 14 in the
Important Safety Instructions.
Safety check
Upon completion of any servicing or repairs to your set-top box, ask the
service technician to perform safety checks to determine that your set-top
box is in its proper operating condition. See also item 14 in the Important
Safety Instructions.
SAVE THIS INFORMATION FOR FUTURE REFERENCE
3 in.
3 in.
3 in.
• You can place your set-top box
near other consumer electronics
devices, such as stereo
amplifiers or televisions, but you
must not place it directly on top or underneath them.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
SAFETY INFORMATION (cont.)
Regulatory information
Safety aspects of connections
Full details of the rear panel are on page 6.
Connecting
To ensure correct operation, use this set-top box only with the Paceapproved power supply unit provided. If you use an unapproved
alternative, you will invalidate the warranty.
Always connect the cord from the power supply unit to your set-top box
before you insert the power supply unit into the wall socket-outlet.
Disconnecting
To disconnect power from your set-top box, always remove the power
supply unit from the wall socket-outlet (i.e. rather than remove the cord
from your set-top box). Therefore you must install your set-top box near to
the wall socket-outlet, which should be easily accessible.
If you are in any doubt about the power supply cord, its plug or its
connection, or are not certain that the electrical outlets you are using
are properly wired and grounded, consult a qualified electrician before
proceeding any further.
The model and serial number and electrical rating of your set-top box are
on a label on its base.
WIFI
Users should be advised that high-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350 MHz and 54705725 MHz and that these radars could cause interference and/or damage
to the LE-LAN device.
The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems.
NOTE
Part 15 of FCC rules
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC RF Radiation Exposure Statement
MPE/SAR/RF Exposure Information.
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
This equipment was verified for RF exposure and found to comply with
Council Recommendation 1999/519/EC and FCC KDB 447498 D01
General SAR Exclusion Guidance.
WARNING: While this equipment is in operation, a separation distance
of at least 20 centimeters (equal to 8 inches) must be maintained
between the antenna inside the equipment and the bodies of all
persons exposed to the antenna in order to meet the FCC RF exposure
guidelines. Making changes to the antenna or the equipment is not
permitted. Doing so may result in the equipment exceeding the FCC
RF exposure guidelines. This equipment must not be co-located or
operated in conjunction with any other antenna or radio transmitter.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate
this equipment. Failure to heed the Safety Information provided by
failing to connect to a properly wired outlet may void the manufacturer’s
warranty.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
REAR PANEL AND BASE
Rear panel
ETHERNET
From your home network
(optional)
HDMI TV
HDMI output to your TV
INPUT
HDMI input (under
label). For future use.
Ethernet
INPUT (behind label)
TV
Power
POWER
(Make this
connection
last of all)
Connect to your home network (optional).
Connect another optional HDMI device (allowing the device’s output to loop through the set-top box to the TV).
Connect to the HDMI input on your HDTV.
Connect your set-top box’s power supply unit here. Only with the Pace-approved power supply unit provided.
Make this connection last of all.
Base
WPS button
SN: PAW400000001
eSTB MAC: A1:B2:C3:D4:E5:F6
ETH MAC:
WiFi MAC:
12:AB:34:CD:56:EF
1A:2B:3C:4D:5E:6F
Model: Pace PX051AEI
FCC ID: NQ8PX051AEI
Input: 5V
3.0A
yymmddXXXX
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
FRONT PANEL AND TOP COVER
Front panel
IR Receiver
Receives signals from your
remote control. Do not block.
Top Cover
Power light
Lights when your set-top box is on.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
CONNECTING THE EQUIPMENT
Typical setup
WARNINGS
A typical setup is shown on page 9. This shows a Pace Xi5 connected to a high-definition TV via an HDMI
cable. You Xi5 receives content from your cable TV service provider via a WiFi connection to a 5 GHz wireless
router (this connection can also be made using an Ethernet cable). See page 11 for more information on
wireless connections.
Your equipment should have been connected up by your installer. However, if you need to disconnect and
reconnect your equipment, read page 9.
The setup shown on page 8 make efficient use of the connectors on your set-top box. However, depending
on your other equipment and the connectors on it, the person who installed your system may have chosen to
connect things differently.
NOTES
In order for you to view programs broadcast in high-definition, your set-top box must be connected to a
suitable HDTV or computer monitor.
To connect your set-top box wirelessly to your cable TV service provider, your home must have a 5 GHz
wireless router or access point that supports Wi-Fi Protected Setup (WPS) so that the set-top box can
correctly associate with your wireless network. See page 11 for more information.
Your cable TV service-provider determines the digital channels, services, and screen information that you see
on your TV when you use your set-top box and its remote control.
Do not connect your set-top box
(or any other equipment such as
a TV or DVD player) to the power
supply until you have properly
connected all the other cables.
Disconnect your set-top box’s
power supply unit from the
AC power supply before you
disconnect any other equipment
from its rear panel.
The only way to disconnect your
set-top box from the AC power
supply is to remove the power
supply unit from the wall AC outlet
(or switch the wall AC outlet switch,
if present, to its OFF position).
Your set-top box must therefore be
installed near to the wall AC outlet,
which should be easily accessible.
Consult the information supplied by your cable service-provider for details on how to make the most of the
digital cable services. Also read the operating instructions that are supplied with your remote control.
NOTE
Copy protection via an HDMI secure link
The HDMI link between your set-top box and your HDTV should be a secure link. When your set-top
box is attached via an HDMI cable to an HDCP-compliant (High-bandwidth Digital Content Protection)
HDTV, the HDTV and set-top box negotiate a secure link, which allows your set-top box to transmit full
resolution video (picture) to your HDTV.
Not all HDTVs support HDCP. If your set-top box is connected to an HDTV that does not support it, the
HDMI output is then disabled, so no picture is transmitted from this connector.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
CONNECTING THE EQUIPMENT (cont.)
Connecting your equipment
For further information, see page 8.
HDTV
HDMI
HDMI
connecon
Xi5
WIFI
GATEWAY
Ethernet connecon (oponal)
WALL AC OUTLET
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
CONNECTING THE EQUIPMENT (cont.)
WARNINGS
Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until
you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety.
Connecting the power supply unit to your set-top box
Before you insert the power supply unit into the wall AC outlet, connect the cord from the power supply unit to
the socket labeled
on your set-top box’s rear panel.
Connecting equipment to the wall AC outlets
Connect your set-top box’s power supply unit, and the plugs on the power cords from your TV, DVD player,
and any other equipment, into wall AC outlets. If these outlets have switches, switch them ON.
Turning your set-top box on and off
After you have connected your set-top box’s power supply unit to the wall AC outlet (and switched this outlet
ON, if it has a switch), your set‑top box powers up. The Power light on the set-top box’s top cover lights to
show that your set-top box is fully on. Note: the light may flash while the set-top box powers up.
Power light
Lights when your set-top box is on.
To turn your set-top box on or off at any time, press the
Power button on your remote control.
Never turn off your set-top box by simply disconnecting it from the power supply. If you need to disconnect
your set-top box, first turn it off by pressing the Power button on your remote control.
Lightning storms
Disconnect your set-top box’s power cord during lightning storms. A lightning storm may affect your set-top
box, if it is on during the storm. It may appear that it has stopped working, but you can easily restore its
operation as follows:
Unplug your set-top box’s power supply unit from the wall AC outlet. Then plug this power supply unit in
again at the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
10
CONNECTING THE EQUIPMENT (cont.)
Starting the WiFi connection
NOTE
Your home must have a 5 GHz wireless router or access point that supports Wi-Fi Protected Setup (WPS)
so that the set-top box can correctly associate with your wireless network.
Consult the instructions for your wireless router or access point to find out what you need to do to initiate a
WPS WiFi connection.
When you have activated the WPS system on your router or access point, press the
base of your set-top box.
WPS button on the
WPS button
This automatically connects yourSN:set-top
box to your wireless
network using WPS.
PAW400000001
eSTB MAC: A1:B2:C3:D4:E5:F6
Note: WPS will remain active for only a limited time to allow this pairing process; please consult the
ETH MAC: 12:AB:34:CD:56:EF
WiFi MAC: 1A:2B:3C:4D:5E:6F
instructions for your wireless router
or access point for information
on the length of this limited time.
Model: Pace PX051AEI
FCC ID: NQ8PX051AEI
Input: 5V
Regulatory information for WiFi
3.0A
yymmddXXXX
NOTE
Users should be advised that high-power radars are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5470-5725 MHz and that these radars could cause interference and/or damage
to the LE-LAN device.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
11
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”)
THE PRODUCT TO WHICH THESE TERMS RELATE (THE “PRODUCT”) INCORPORATES SOFTWARE WHICH IS OWNED BY PACE
plc (“PACE”) OR ITS THIRD PARTY LICENSORS (THE “SOFTWARE”). BEFORE USING THE PRODUCT PLEASE READ THESE
TERMS. IF YOU DO NOT AGREE TO THESE TERMS YOU MAY NOT USE THE PRODUCT AND SHOULD IMMEDIATELY RETURN
THE PRODUCT TO YOUR SUPPLIER. THESE TERMS ALSO APPLY TO ANY MODIFICATIONS, UPDATES OR SUPPLEMENTS TO
THE SOFTWARE PROVIDED TO YOU. FOR PURPOSES OF THESE TERMS, “YOU” MEANS YOU, THE END USER, AND YOUR
PRODUCT SUPPLIER, UNLESS THE CONTEXT REQUIRES OTHERWISE.
A. License Grant and Conditions
1.
Pace, or your supplier, if applicable, grants you a non-exclusive, non-transferable, limited license to use the Software solely
as integrated with, incorporated into, or provided for use in connection with the Product.
2.
Pace reserves all rights not expressly granted to you under these Terms.
3.
You may not transfer any of your limited rights in the Software without the prior written consent of Pace, and if consent
is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND ONLY IF the
transferee has read and agreed to accept these Terms.
4.
You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not
altered or removed.
5.
The Software is protected by copyright and other laws and international copyright and other treaties.
6.
The Software provided hereunder is licensed (not sold). Pace is NOT transferring title or any ownership rights in the Software
to you.
7.
All title and intellectual property rights in and to the Software and all modifications, updates, enhancements and derivative
works of the Software are owned exclusively by Pace or its licensors and you agree to execute any document reasonably
requested by Pace to evidence such ownership rights.
8.
Certain third party software used in connection with the Product may be made directly available to you by operating system
or other third party providers. Use of such Software is also subject to the terms of any applicable agreement between you and
such third party.
B. License Restrictions
Except as expressly permitted herein or by statute you may not:
1.
use the Software in conjunction with any other hardware or equipment other than the Product;
2.
copy or modify all or any portion of the Software;
3.
incorporate all (or any portion of) the Software into other programs developed or used by (or on behalf of) you;
4.
reverse engineer, decompile, decrypt or disassemble the Software (or any portion of the Software); or
5.
export, transfer or re-export the Software in violation of any applicable law.
C. Open Source Software
Certain components of the Software are subject to either:
(i) the GNU General Public License (“GPL”);
(ii) the GNU Lesser General Public License (“LGPL”); or
(iii) OpenSSL license.
The foregoing are not subject to the restrictions in Section B. In compliance with the GPL and LGPL Pace makes the source code
of the Linux software, libraries and associated utilities it uses, together with its modifications (if any), available to the public in
source code form at: http://www.pace.com/opensource/request.
You are free to use, modify and distribute the Linux software and any modifications as long as you comply with the terms of the
GPL or LGPL referred to above. The License terms applicable to (i) to (iii) above are available to you, as explained in the section
below entitled Open Source Licenses.
The Software also contains the following:
(iv) SHA library Copyright © 2000-2001, Aaron D. Gifford All rights reserved.
(v) Expat XML Parsing Library
Copyright © 1998, 1999, 2000 Thai Open Source Software Centre Ltd and Clark Cooper.
Copyright © 2001, 2002, 2003 Expat maintainers.
(vi) Expat++ This component of the Software is subject to the Mozilla Public License Version 1.0.
(vii) Base64 Algorithm Copyright © 2001 Bob Trower, Trantor Standard Systems Inc.
Certain additional license terms applicable to (iv) to (vi) above are available to you, as explained in the section below entitled Open Source
Licenses.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
12
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) (cont.)
D. Termination
These Terms are effective until terminated. You may terminate these Terms by returning the Product to your supplier. These Terms
will terminate automatically without notice if you fail to comply with these Terms or any other written agreement between you and
Pace. Upon termination you must return the Product to your supplier.
E. Disclaimer
1.
EXCEPT AS SET FORTH IN ANY WRITTEN AGREEMENT BETWEEN YOU AND PACE (OR YOUR SUPPLIER), THE SOFTWARE
IS (TO THE EXTENT PERMITTED BY LAW) SUPPLIED “AS IS” AND PACE AND ITS LICENSORS EXPRESSLY EXCLUDE
ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) WARRANTIES OF MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR PURPOSE AND NON-INFRINGEMENT.
2.
EXCEPT AS SET FORTH IN ANY WRITTEN AGREEMENT BETWEEN YOU AND PACE, IN NO CIRCUMSTANCE WILL PACE BE
LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, PUNITIVE OR INCIDENTAL DAMAGE (INCLUDING LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA OR THE COST OF PROCUREMENT OF SUBSTITUTE GOODS,
TECHNOLOGY OR SERVICES) ARISING OUT OF THE USE OR THE INABILITY TO USE THE SOFTWARE.
F. General
These Terms are governed by the laws of the State of New York and you may only bring claims exclusively in New York courts and
Pace shall be entitled to bring a claim in the courts of any jurisdiction. Any failure by Pace to enforce any of its rights hereunder
or applicable law shall not constitute a waiver of such rights. Pace’s licensors and suppliers shall be third party beneficiaries of
this License Agreement, as applicable.
YOUR USE OF THE PRODUCT CONSTITUTES YOUR ACKNOWLEDGEMENT THAT YOU HAVE READ THESE TERMS AND AGREE
TO BE BOUND HEREBY.
Open Source Licenses
The software contained in this product may be covered by certain components consisting of free software or open source software.
A list of these components and a copy of the relevant copyright notices and license term notices that are required by such licenses
are available at this web page:
http://www.pace.com/opensource/license
This list may change from time to time and may depend on the model of product or the version of software you have received. If
you are unable to access this web page and wish to have a copy of this list, please contact the Open Source Administrator at: 3701
FAU Boulevard, Suite 200, Boca Raton, Florida 33431 USA. To the extent the terms of these open source or free software licenses
prohibit any of the restrictions in any end user license included with the product, such restrictions will not apply to the applicable
open source or free software component.
Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)
13
www.pace.com
Pace and
are trademarks and/or registered trademarks of Pace plc.
DRAFT-160208

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00
Create Date                     : 2016:02:08 10:22:17Z
Metadata Date                   : 2016:02:08 10:22:22Z
Modify Date                     : 2016:02:08 10:22:22Z
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:bf0bd95f-1653-3347-b345-8cd4fb963531
Original Document ID            : xmp.did:01801174072068118083FB61450A24AA
Document ID                     : xmp.id:c75e8d3d-d6b5-432f-b999-090b8e3836a4
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e0b38d4b-f76d-4cac-9f7f-43aa2493f983
Derived From Document ID        : xmp.did:6d31fe10-6628-45ee-a9f0-d6fa33341ab3
Derived From Original Document ID: xmp.did:01801174072068118083FB61450A24AA
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:02:08 10:22:17Z
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 14
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools