ASIA ELECTRONIC TECHNOLOGY 372147287963 2.4GHZ WIRELESS DEVICE User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	909406
Application ID	4XcwUFnzhktz2HpFq3FGUQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.19kB (1289902 bits)
Date Submitted	2008-03-04 00:00:00
Date Available	2008-03-04 00:00:00
Creation Date	2007-12-24 15:40:36
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	0000-00-00 00:00:00
Document Title	无线吉他说明书-2(英)
Document Creator	CorelDRAW 12.0 版

IMPORTANT INFORMATION REQUIRED BY THE FCC
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV
TM
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
DigiJet
D-1218
Functions of the Receiver
10 Signal Indicator for Connection
7 A/B Transfer Switch
2.4GHz Digital Wireless Guitar System
11 Power Indicator
Using Adaptive Digital Frequency Hopping Technology
The Transmission System For D-1218 Wireless Guitar Adopts The
Patent Technology of 2.4GHz Digital Active-Dynamic Frequency
Hopping, Which Breaks Through The Barriers of Narrow Carrier
Frequency and Poor Capacity of Anti-Interference Etc. For FM,
VHF and UHF Wireless Technologies, and Makes The Frequency
Bandwidth of Wireless Transmission to The CD Music Quality of
20Hz~ 20000Hz; the Revolutionary Designs, Such as Good Capacity
of Anti-Interference, low Power Consumption and Convenience For
use etc., Equals The Evolution From Traditional Camera to Digital
Camera.
12 Level Indicator
8 Power Plug
10
Wireless Receiver
11
12
2.4GHz Digital Wireless Guitar System
9 Audio Signal Output Line
A/B Transfer Switch ---- used for the transfer of A/B working group.
Power Plug ---- DC8.5V/160mA direct current. Inserting the plug, the
power indicator turns on, and the power supply is connected.
Audio Signal Output Line ---- the output line is connected to the input
end of guitar sound box or sound reinforcement.
Signal Indicator for Connection ---- it shall blink when the transmitter
on guitar and receiver are connected.
Power Indicator ---- the red light shall be on when the power is
connected.
Level Indicator ---- it shall blink when the guitar music signal is
inputted.
U s i n g A d a p t i v e D i g i t a l F r e q u e n c y H o p p i n g Te c h n o l o g y )
Connection Example
Transmitter on Guitar
Advantages:
1.Transmission of CD music quality, frequency response 20Hz-20KHz
+/- 2dB.
2.Advanced patent technology for digital 2.4GHz/ 4Mbit transmission,
using exclusive channel for global use.
3.Active adaptive dynamic frequency hopping technology of 18 channels,
with optimum capability of anti-interference.
4.Ultra-low power consumption. 2 average batteries could work for
6 hours or so.
5.Stable transmission distance. Effective transmission distance indoor is
to be 20 meters, and 60 meters outdoor.
6.Digital product. Easy to use.
7.Static noise < 0.5mV, with extremely low noise.
the transmis sio n system for D-1 218 wir ele ss guit ar is desig ned
for the mediu m-s mall music band, school, gatherin g and
mediu m-s mall concert etc., wit hout the restric tio n of lin es. It is
perfect for the stage of 5000~8000square feet, and two guit ars
or basses could be put in to wir ele ss use at the same tim e.
AC Power Adaptor
Input end of relevant
equipment for guitar
Audio Mixing Console
Functions of the Transmitter on Guitar
Guitar
Sound
Box
Input Line
Power Indicator
(Red)
Steps
Turn the swith to
the up-side down
Signal Indicator
(Green)
Red power indicator is on
Signal indicator blinks
Power Switch
Cell Cover
Ensure that 2AAA batteries with enough
electricity are loaded
Power indicator turns red
Top View
Signal indicator blinks
Belt Clip
Side View
1 Input Line---- connecting the audio output of guitar.
②Power Indicator (red) ---- the red indicator shall light when the power
switch is on. (The indicator shall be off when the cells are out of
service. Please replace the cells when the indicator turns off or
doesn't light while the switch is on).
③Signal Indicator (green) ---- it shall blink when the transmitter and
receiver are connected (it's going to be off when it's beyond normal
receiving distance).
④Power Switch ---- when turning to up-side down, the power is
connected.
⑤Belt Clip ---- fixing the guitar transmitter to the guitar belt.
⑥Cell Cover ---- open the cell chamber by unscrewing the screws while
replacing the cells (using 2 AAA batteries).
Please use Genuine 1.5V Alkaline Batteries.
Ensure the DC power
plug is inserted
Ensure the audio input line
is conneted to guitar sound
box or other equipment
1.Ensure the guitar wireless transmitter and receiver is loaded with
batteries or power supply.
2.Turn the power switch on guitar wireless transmitter up-side down to
the ON position, and the indicator turns red.
3.The receiver is connected to power supply, and ensure the red
indicator on receiver is on and signal indicator blinks.
4.The wireless transmitter on guitar side and the green signal indicator
on receiver both blink, indicating the wireless transmission system is
connected for application
Failu re Recovery
Battery Replacement
Unscrewing, flipping over
the cell cover.
Pusing the cover,
and rescrewing.
Recovery
Failu re Pattern
Turn off the power of transmitt er and receiver, check
the A-B transfer switc h for whether both the
transmitt er and receiver are at A or B positio n, and
then restart the equipment.
Fail to connect transmitt er
with receiver
Power indicator is off
1.Unscrewing, flipping over the cell cover and the batteries are visible.
2.Unloading the run-out batteries, for 2 new AAA ones.
3.The new batteries shall be placed according to the + and - marks in
the cell chamber.
4.Close the cell cover, and fix the screw to finish the replacement.
Replace new battery
-replace new battery
-remove the nearby disturbance source of
radio-frequency.
Working distance is not
enough
-replace new battery
-remove the nearby disturbance source of
radio-frequency.
Incidental noise
1, One of the 2 systems must be set to either Channel
A or B on the system channel switch while the other
be set to either Channel B or A correspondingly.
2, Do not place one receiver on top of the another one.
3, Make sure that the distance between 2 receivers is no
less than 2 feet.
4, Check battery in both transmitters to ensure there is
sufficient power.
Trouble-Shooting for
Interference between
2 sets of D-1218 in
synchronous
utilization.
Illustration for External Power
Specification
AC power
2.410GHz--2.470GHz
Frequency
response
20Hz~20KHz/±2dB
Sound
processor
44.1KHz/16 Bit
<0.5mV
Working
environment
-10°c to +50°c
(14°F to 122°F)
Noise
1.Exclusive power adapter (AC110V or AC220 input, DC8.5V 160mA
output, subject to the local voltage) are included in the accessory.
2.Ensure the DC plug is firmly inserted.
Normal working
distance
Working
frequency
Power level
10mV
( when the input is 10mV )
Package
size
290x240x75(mm)
Indoor: 20m(66f)
Outdoor: 60m(197f)
Average value for
transmit power
10mw
Package gross
weight
Audio Dynamic Range:
1.2Kg(2.65 Lbs)
＞365mv
Method for Using Two Wireless Systems Simultaneously
Guitar transmitter
If the customer has 2 Digijet D-1218 systems for the use of guitar
wireless transmission, please follow the steps hereinafter to set
Group A and B.
(Digijet wireless guitar transmission system only allow for two
sets of products being used simultaneously at one place)
Size
Receiver
128x38x27(mm)
Size
200x120x29(mm)
80g
Weight
300g
Weight
Require ment for 2 AAA-size alkaline
power supply
batteries
1、The wireless transmitter of guitar is in the cell chamber, with an AB switch.
Service time
of battery
Re qu iremen t for
po we r sup pl y
DC 8.5V/160mA
≥6H
The above mentioned is typical specification, and it may be a little
different from the ex-factory product. The manufacturer has right to
adjust and improve it without prior notification. The appearance of
real product may be different from the pictures in this instruction.
On the wireless transmit and reception
Even if this equipment is fixed and used per the guidance, there still
may be interference to the wireless transmit. The company doesn't
ensure this product wouldn't be interfered by the radio and TV etc.
radiation. Restarting the equipment may remove such interference;
otherwise the following methods may be taken:
1.Adjust the distance and angle of placement.
2.Keep this product from disturbing equipment.
3.Seek help from local dealer or radio/TV technician.
4.If the interference still exists, stop using this product, and contact
agent for help.
Accessories
2.There is an AB switch on back of the receiver.
3.All D-1218 are set at Group A ex factory.
4.If two groups are used at the same time, please ensure
one is set at A, and the other is set at B.
Group A
Group B
X1
2.D-1218 wireless guitar receiver
X1
3.D-1218 appropriate power adaptor
X1
4.AAA-size battery
X2
5.Group A label
X4
6.Group B label
X4
7.Instruction
X1
8.Warranty card
X1
1.D-1218 guitar transmitter
MADE IN CHINA
Patent of this Product is pending.
This
device complies with Part 15 of the FCC Rules. Operation is subject
to the
FCC ID:VSE372147287963
following
two conditions: (1) this device may not cause harmful interference, and
FCC ID:VSE462459458972
(2) this device must accept any interference received, including interference that
may cause undesired operation.
TM
DigiJet
5.After it is set fine, please stick the label A on the transmitter and receiver of
Group A, and label B on the transmitter and receiver of Group B for identification.
6.Please turn on Group A firstly and then Group B when start the equipment
(refer to Steps on page 1).
7Logik Technology Inc.
California u.s.a
www.7Logik.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.525
Mod Date--Text                  : 
Creator Tool                    : CorelDRAW 12.0 版
Modify Date                     : 2008:03:04 19:00+08:00
Metadata Date                   : 2008:03:04 19:00+08:00
Format                          : application/pdf
Title                           : 无线吉他说明书-2(英)
Document ID                     : uuid:274fc2ef-f790-47ea-a07f-a7570e548aff
Instance ID                     : uuid:41f4b444-891d-4e9a-9bd4-99c2903f55ea
Has XFA                         : No
Page Count                      : 2
Create Date                     : D:20071224154036
Creator                         : CorelDRAW 12.0 版

EXIF Metadata provided by EXIF.tools