ASOKA USA PL9661-ETH PLUGLINK HD AV ECO ADAPTER User Manual PL9661 ETH 0506

ASOKA USA Corporation PLUGLINK HD AV ECO ADAPTER PL9661 ETH 0506

Users Manual

Download: ASOKA USA PL9661-ETH PLUGLINK HD AV ECO ADAPTER User Manual PL9661 ETH 0506
Mirror Download [FCC.gov]ASOKA USA PL9661-ETH PLUGLINK HD AV ECO ADAPTER User Manual PL9661 ETH 0506
Document ID1159673
Application IDlWtlsL6FsV0mExUvMts64w==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize99.97kB (1249680 bits)
Date Submitted2009-08-26 00:00:00
Date Available2009-08-27 00:00:00
Creation Date2009-05-29 11:42:51
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2009-08-26 13:45:47
Document TitleMicrosoft Word - PL9661-ETH-0506
Document CreatorPScript5.dll Version 5.2.2
Document Author: SnoopyPC

PlugLink HD AV ECo Adapter
User’s Guide
PL9661-ETH
QUICKFIND LOCATOR
Contact
Information
Getting Help Table
of Contents
Installation
66‐0360‐00Rev.001
© 2009 Asoka USA Corporation
ALL RIGHTS RESERVED
Notice: No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or stored in a database or retrieval system for any
purpose without the express written permission of Asoka USA Corporation.
Asoka USA Corporation reserves the right to make changes to this user’s guide at any time without notice and
assumes no responsibility for its use. Asoka USA products and services can only be ordered under the terms
and conditions of Asoka USA Corporation's applicable agreements. All of the features described in this user’s
guide may not be currently available. Refer to the most recent product announcement for information about
feature and product availability.
This user’s guide contains the most current information available at the time of publication. When new and/
or revised information becomes available, this entire user’s guide is updated and distributed to all registered
users.
All company and product names mentioned herein are trademarks of their respective companies. Mention of
third-party products is for informational purposes only and constitutes neither an endorsement nor a
recommendation. Asoka USA Corporation assumes no responsibility with regard to the performance or use of
these products.
Revision
Date
Description
66-0360-00Rev.001
May 2009
Preliminary Release
Changes in This Revision
• Not applicable (preliminary release)
2 of 34
PlugLink HD AV ECo Adapter User’s Guide
Contact Information
For more information about the PlugLink HD AV Eco Adapter or any of Asoka’s other
leading-edge solutions, please contact us using any of the following methods:
Voice calls: We welcome your calls Monday through Friday, from 9:00 am to 5:00 pm
Pacific Time at (408) 550-8167. Voice mail is available during non-business hours.
Email: If you prefer, you can send information requests to our e-mail address:
sales@asokausa.com.
Fax calls: You can also send your requests for information to our 24-hour fax number:
(408) 884-2390.
Web site: Our Web site contains valuable information about our products, solutions,
and services. We encourage you to visit us at http://www.asokausa.com.
Getting Help
Asoka USA backs its products with unparalleled customer service and technical support for
our valued customers.
Customer Service
Customer service, the customer-satisfaction arm of Asoka USA, is available Monday through
Friday, from 9:00 am to 5:00 pm Pacific Time, by calling (408) 550-8173 or emailing
custserv@asokausa.com.
Technical Support
Technical support is available Monday through Friday, from 6:00 am to 6:00 pm Pacific
Time, by calling (408) 550-8173 or through email at support@asokausa.com.
Please provide the following information about the problem:
z Product name, model number, part number (if applicable) and serial number
z System configuration, including a description of the devices connected to your PlugLink
HD AV Eco Adapter
z The circumstances surrounding the error or failure
z A detailed description of the problem and what has been done to try to solve it
3 of 34
PlugLink HD AV ECo Adapter User’s Guide
Table of Contents
Simple Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Types of Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Simple Connection (Peer to Peer) . . . . . . . . . . . . . . . . . . . .1-2
Simple Broadband Connection. . .. . . . . . . . . . . . . . . . . . . . 1-2
Other Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Finding a Suitable Location. . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Installing the Hardware . . . . . . . . . . . . . . . . . .. . . . . . . . . . 1-3
Advanced Configuration (Expert Users Only) . . . . . . . . . . . . . 2-1
Installing the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Network Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Viewing Device Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
Changing Names and Encryption Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Resetting and Upgrading the PlugLink AV . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Manually Resetting Firmware and NID. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Prioritizing Network Traffic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Viewing Network Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6
Viewing Ethernet and HomePlug Connection . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Viewing Connection Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Statistics Subscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Scanning Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Specifications .....................................................................A-1
Components.......................................................................B-1
Warranty ..........................................................................D-1
FCC Notice .........................................................................E-1
4 of 34
PlugLink HD AV ECo Adapter User’s Guide
Simple Installation
Congratulations on your purchase of the PlugLink HD AV ECo
Adapter!
This adapter allows you to network your home or office by
plugging directly into an electrical outlet. With your PlugLink HD
AV ECo Adapter, you can easily share your high-speed
Internet, mp3s, video, and gaming throughout the home or office.
This manual describes how to connect your PlugLink HD AV ECo Adapter
to a PC or cable/DSL router.
Package Contents
PlugLink HD AV ECo Adapter (PL9661-ETH)
6-foot Ethernet cable
Quick Installation Guide
Installation Resource CD (for advanced users only)
Warranty and Support Information Card
If any of the parts are incorrect, missing, or damaged, contact the retailer
where you made your purchase. Keep the carton, including the original
packing materials, in case you need to return the unit for repair.
Types of Connections
This section describes what you need to do to before installing the
PlugLink HD AV ECo Adapter. You can set up a home or an
office network or compliment your existing network by connecting
to any device with a 10BaseT/100BaseT Ethernet-capable device.
5 of 34
PlugLink HD AV ECo Adapter User’s Guide
Simple Connection (Peer to Peer)
To share a simple connection between computers, attach one PL9661-ETH
device to each computer.
NOTE: Do not connect the PlugLink HD AV ECo Adapter into a power
strip, extension cord, un-interruptible power supply (UPS), or surge
protector. This may prevent the unit from working properly or degrade the
network performance.
Simple Broadband Connection
The following items are needed to share a Broadband connection with
computers:
z One (1) PL9661-ETH device attached to a standard cable, DSL, or wireless
router
z One (1) PL9661-ETH device attached to each comput
6 of 34
PlugLink HD AV ECo Adapter User’s Guide
Other Connections
You can also use the PlugLink HD AV ECo Adapter with other Ethernet
enabled devices, such as IP Cameras, IP set top box, game consoles, etc.
Finding a Suitable Location
Find a suitable location to install your PlugLink HD AV ECo Adapter.
Where you install the units can affect their performance. Find a location that
is:
Acceptable temperature and humidity ranges.
Free of strong electromagnetic field generators (such as motors), vibration,
dust, and direct exposure to sunlight.
z An electrical outlet for your PlugLink HD AV ECo Adapter. Outlet must
be is within six feet (1.82 meters) of the device you are connecting to.
Installing the Hardware
Connect each of your PlugLink HD AV ECo Adapters.
1. Connect the unit into a nearby wall outlet (Do not plug the adapter into a
power strip).
2. Connect the enclosed Ethernet cable to the Ethernet port of the unit.
3. Connect the other end of the cable to the Ethernet port of the PC or
device.
Congratulations! You have completed the installation of the PlugLink HD
AV ECo Adapter for normal use.
7 of 34
PlugLink HD AV ECo Adapter User’s Guide
Advanced Configuration
(Expert Users Only)
This chapter provides information on installing and setting up the
PlugLink HD AV ECo Adapter.
NOTE: Do not connect the PlugLink HD AV ECo Adapter
into a power strip, extension cord, un-interruptible power supply
(UPS), or surge protector. This may prevent the unit from
working properly or degrade the network performance.
Installing the Software
Following are software installation procedures for advanced users.
NOTE: Software installation is not required for normal use. The
utility is used to change the security settings and view information
about the network.
1 Insert the enclosed Installation Resource CD into your CD-ROM drive
If the PlugLink HD AV ECo Adapter Installation Utility does not
appear within 30 seconds, select your CD-ROM drive and double-click
the Setup.exe icon to start the Installation Utility.
2 Select the language preference, and click the Run button.
8 of 34
PlugLink HD AV ECo Adapter User’s Guide
3. In the Start screen, click Install Driver to start the installation.
4. In the Welcome screen of the screen of the wizard, click Next to begin the
installation.
9 of 34
PlugLink HD AV ECo Adapter User’s Guide
5. Read the End User Software License Agreement, and if you agree, click the
Agree button to continue the installation.
6. To change the name of the PlugLink AV unit, select Yes, and enter a
name in the text field. Otherwise, select No. Click Next to advance to the
next screen.
10 of 34
PlugLink HD AV ECo Adapter User’s Guide
7. This following screen allows you to change the network password for
your PlugLink HD AV ECo Adapter units. To change the network password, select Yes and
then enter the new password in the text field. Or, select No and click the
Next button to continue.
NOTE: All devices on your network must share the same password to
communicate. Use care when changing the network password. The default
password is HomePlugAV.
8. Select the location where you want to install the drivers and software and
click the Install button.
11 of 34
PlugLink HD AV ECo Adapter User’s Guide
9. When the installation of the PlugLink AV drivers and software is complete,
you can use Power Manager Utility for advanced configuration of your
PlugLink AV 9661 unit. Click Finish to finish the installation wizard.
12 of 34
PlugLink HD AV ECo Adapter User’s Guide
Network Management
The Power Manager Utility allows you to manually
configure a PlugLink HD AV ECo Adapter that
is directly connected to your Personal Computer or
to any PlugLink HD AV ECo Adapters that are
remotely residing on your PlugLink AV Mealybug
network.
NOTE: The Power Manager Utility is for all Asoka PLC devices.
Viewing Device Information
Use the Profile screen to view information on all Mealybug devices
attached directly to your PC and other Mealybug devices on your
network.
The Profile screen displays the following information:
Device Name
MAC Address
Firmware version of your devices
Estimated device transmission rate
To refresh the list of Mealybug devices, Click the Rescan button.
NOTE: Devices set up with a different network password will NOT
show up on this list.
13 of 34
PlugLink HD AV ECo Adapter User’s Guide
Changing Names and Encryption Keys
Use the Device Screen to change your local and remote device names and
change local and remote device Network Encryption Keys (NEK). Always
change the remote devices before changing the one you are connected to.
To change a remote device's NEK:
Check the box next to the device that you want to change the NEK.
Enter the password of the remote device. The password is printed on the
device label. The default password is “HomePlugAV.”
Enter a new password.
Click the Update butto
NOTE: The device will not appear again until the device you are connected
to is changed to the same password. All devices must have the same
password.
14 of 34
PlugLink HD AV ECo Adapter User’s Guide
Resetting and Upgrading the PlugLink AV
Use the Upgrade Screen to perform the following functions:
z Reset the PlugLink HD AV ECo Adapter to factory default settings.
z Reboot the PlugLink HD AV ECo Adapter device. You can also reboot the device by
unplugging and replugging the unit into the electrical outlet.
z Upgrade the firmware for the PlugLink HD AV ECo Adapter device. Visit
www.asokausa.com to upgrade the firmware.
15 of 34
PlugLink HD AV ECo Adapter User’s Guide
Manually Resetting Firmware and NID
You can use the buttons on the PlugLink device to reset the firmware to its
default, or NID to associate a network.
NOTE: The PlugLink device must be plugged into an electrical outlet when
using these buttons. If you have questions, please contact Asoka USA
Technical Support at (408) 550-8173
16 of 34
PlugLink HD AV ECo Adapter User’s Guide
Prioritizing Network Traffic
Use the QoS screen to prioritize your traffic through the device.
z IGMP - (default CAP 3) - sets the channel access priority for IGMP group
management frames
z Unicast - (default CAP 1) - sets the default channel access priority for
Unicast frames not matching any other classification or mapping.
z IGMP managed Multicast Stream (It is better set it fixed to CAP 2) -sets the
default channel access priority for stream data belonging to a snooped IGMP
multicast group.
z Multicast/Broadcast - sets the default CAP for multicast frames not in a
snooped group and for broadcast frames.
17 of 34
PlugLink HD AV ECo Adapter User’s Guide
Viewing Network Statistics
The Statistics screen shows information on HomePlug packets that are
transmitted and received by the devices in your network. To enable this
function, click Enable Statistics.
Viewing Ethernet and HomePlug Connection
The Link screen has two sub-screens that provide information about your
Ethernet and HomePlug connection.
18 of 34
PlugLink HD AV ECo Adapter User’s Guide
Viewing Connection Speed
The Ethernet subscreen shows the Ethernet connection speed of the local
and destination devices in your network. You can select the destination
device in the Destination Address drop down menu. Click the Retrieve
button to get the information.
Statistics Subscreen
Use the Statistics subscreen to view statistical information about your
connection between a source device and a specific destination device in your
network. Click the Retrieve button to start accumulating the statistical
information.
19 of 34
PlugLink HD AV ECo Adapter User’s Guide
Scanning Devices
Use the Rescan button to rescan the devices on the HomePlug network. This
refreshes the information on all devices using the same password.
20 of 34
PlugLink HD AV ECo Adapter User’s Guide
Troubleshooting
Following are solutions to a few situations you might encounter. If
you do not find a solution in this chapter, contact Asoka USA
Technical Support by phone at (408) 550-8173 or through email at
support@asokausa.com.
Symptom: I can't connect to anything and there are no lights
activated on my PL9661-ETH.
Solution:
1 Unplug the device from the electrical outlet in question.
2 Locate another available outlet in your home.
3 Test the outlet by plugging in another electrical device such as a
lamp or radio.
4 Plug the PL9661-ETH into the working electrical outlet.
5 Check to see if the lights work
6 If the above does not work, the device might be defective.
7 Please contact Technical Support for instructions on returning the
device for repair or replacement.
Symptom: Some of my devices cannot connect to the Internet or
other computers in my network. The lights seem to be functionally
normally.
Solution #1:
21 of 34
Re-Initialize the PL9661-ETH device.
Unplug the PL9661-ETH from the electrical outlet.
Disconnect the Ethernet cable from the device
Plug the PL9661-ETH back into the electrical outlet.
Reconnect the Ethernet cable.
PlugLink HD AV ECo Adapter User’s Guide
Solution #2:
The Network Encryption Key (NEK) may not be correct on your devices.
1 Reset the Network Encryption Key using the Factory Reset button located on
the bottom of your PL9661 AV device. This will reset the NEK back to the default
of HomePlug.
2 Test your connection again. If this still does not work, perform the factory
reset on all of your other PL9661 AV devices in your network.
Solution #3:
It is possible some outlets in your home are not connected together.
1 Unplug the PL9661 AV from the current electrical outlet.
2 Locate another outlet in the home.
3 Plug the PL9661 AV into that outlet.
4 Attach a computer to the PL9661 AV.
5 Open the Power Manager Utility (located on the enclosed CD).
6 Under the Profile button, check if your PL9661 AV is displayed (it will be the
first) and see if your other PL9661 AV devices can be seen. If you can see other
devices under the Profile screen, your PL9661 AV device is functioning properly.
Solution #4:
Your broadband connection may have stopped working.
1 Power down your broadband router and/or DSL/cable modem (if
applicable) for about 30 seconds and then power them back on.
2 If this step fails, please contact your ISP for assistance.
22 of 34
PlugLink HD AV ECo Adapter User’s Guide
Specifications
This appendix lists the specifications for your PlugLink HD AV
ECo Adapter.
Standards Compliance:
•HomePlug® AV • IEEE 802.3, IEEE 802.3x, IEEE 802.3u
Software Utility
Microsoft Windows® 98 SE, 2000, ME, XP, and Vista operating
System Requirements:
systems
Network Protocol:
Network Interface:
TCP/IP, CSMA/CA, TDMA (supported in the future)
One-port 10/100 Ethernet (RJ-45) switch
Bandwidth:
Up to 200 Mbps
Distance:
Up to 656 feet (200 meters)
Operating Frequency:
Modulation Schemes:
2 to 30MHz
• Orthogonal Frequency Division Multiplexing (OFDM) • QAM
1024/256/64/16 •QPSK •BPSK
EMI and Safety:
Additional Protocols:
Power Supply:
• FCC Part 15 Class B •UL (US and Canada) •CE
• Forward Error Correction (FEC) • Automatic Channel Adaptation
• US Version: 100-120VAC • UK/EU Version: 220-240VAC
Surge Energy Rating:
4KV
Power Rating:
• US Version: 100-120VAC 0.1A max, 60Hz • UK/EU Version:
220-240VAC 0.08A max, 50Hz
Security:
23 of 34
128-bit AES
PlugLink HD AV ECo Adapter User’s Guide
Environmental
• Operating temperature: 32°F to 131°F (0°C to 55°C) •
Specifications:
Operating humidity: 10% to 85% Non-condensing • Storage
temperature: -4°F to 158°F (-20°C to 70°C) • Storage humidity:
5% to 90% Non-condensing
24 of 34
Quality of Service:
•ToS • 802.1q • TDMA (supported in the future)
Warranty:
1-year limited
PlugLink HD AV ECo Adapter User’s Guide
Components
Front Panel
Use the status lights on the front panel to verify connections.
25 of 34
PlugLink HD AV ECo Adapter User’s Guide
The following table describes the status light functions in the front panel:
Status Light
Power
PLC Activity
State
Indication
Illuminated Off
Device is powered on Devices has no power
Blinking Red
Traffic is running at < 7 Mbps Traffic is
Blinking Yellow
running at > 7 Mbps and < 40 Mbps Traffic is
Blinking Green Off
running at > 40 Mbps No activity on powerline
(should blink intermittently)
Eth Link
Illuminated Blinking
Ethernet connectivity Ethernet traffic No
Off
ethernet connectivity
Bottom Panel
The bottom panel of the PL9661-ETH contains the following components:
RJ-45 Ethernet port
The label on the rear panel of the PlugLink HD AV ECo Adapter
contains the information listed below.
26 of 34
MAC address
Model number
Part number
Serial number
Unique device password
PlugLink HD AV ECo Adapter User’s Guide
Note: Write this information down in your Warranty Support Information card
for future reference.
Buttons
The Pluglink AV 9661 device has two hardware push buttons:
z FW RST button - Resets the PlugLinkHD AV ECo Adapter back to factory default settings.
Press and hold the button with a pin or other sharp object for about 2 seconds
until you see the lights on the device flash briefly.
z NID button - Allows you to set a randomized Network Encryption Key (NEK) by
pressing on it. You can then have additional units use the same randomized NEK
by using their respective NID buttons.
1 Select a PlugLink AV 9661 (#1) device in your network. Press and hold the NID
button for 10 seconds. After about 10 seconds, the lights on your device will blink
off briefly and come back on immediately. This will change the existing Network
Encryption Key (NEK) to a randomized NEK.
2 On the PlugLinkAV 9661 (#1) device from Step #1, press and hold the NID
button for about 3 seconds. The power light on the device will begin flashing. This
unit has now been set to allow other units to join the network and be assigned the
same password. This unit will remain in “adder” mode for about 3 minutes.
3 Before the three minutes have elapsed from Step #2, select another PlugLink
AV 9661 (#2) device from your network. Press and hold the NID button for about 3
seconds. The power light on the device will blink as well. The #1 and #2 devices
will communicating and the #2 device will have it's NEK set to the NEK of the #1
device. This should happen in about 15 to 20 seconds. Once the process has been
completed, you can then test if the two devices are communicating.
4 If you add units at a later time, you only need to perform Step #2 (using any
device in the network) and Step #3 (any new devices). Step #1 is not necessary
unless you wish to change your NEK.
27 of 34
PlugLink HD AV ECo Adapter User’s Guide
The use of the NID button is optional. You may also use the application
software described in the manual to set NEK's as well.
28 of 34
PlugLink HD AV ECo Adapter User’s Guide
Warranty
Asoka warrants that (a) the hardware components of the product
will be free from defects in materials and workmanship under
normal use for one (1) year from the date of purchase when used
within the limits set forth in the Specifications section of the User
Guide, and (b) the software components will perform substantially
in accordance with Asoka's published specifications for ninety (90)
days from the date of purchase, but does not warrant that the
software will be error-free or free of all defects.
Should a product fail to perform as described in the User Guide
within the warranted period, it will be repaired or replaced with
the same or functionally equivalent product by Asoka, at its
discretion, free of charge provided that you: (a) return the failed
product to an Asoka designated repair facility with shipping charge
prepaid, and (b) provide Asoka with proof of the original date of
purchase. Repaired or replacement products will be returned to
you with shipping charges prepaid. Asoka warrants any replaced or
repaired product or component for the remainder of the initial
warranty period whichever is longer. Replacement products may
be refurbished or contain refurbished materials or components. If
Asoka, by its sole determination, is unable to restore the product
to proper operating condition, it will refund the depreciated
purchase price of the product.
This warranty extends only to you, the original purchaser and is
not transferable to any subsequent purchasers.
This warranty does not apply if, in the judgment of Asoka, the
product fails due to damage from shipment, handling, storage,
accident, abuse, misapplication or misuse, or if it has been used or
maintained in a manner not conforming to product manual
instructions, has been modified in any way, or has had any serial
number removed or defaced. Repair by anyone other than Asoka
or an approved agent will void this warranty. The maximum
liability of Asoka under this warranty is limited to the purchase
price of the
29 of 34
PlugLink HD AV ECo Adapter User’s Guide
product covered by the warranty. Prior to returning any defective product,
the purchaser or the authorized merchant from whom the purchaser
originally bought the product must obtain a Return Material Authorization
(RMA) number from Asoka. All defective products should be returned to
Asoka with shipping charges prepaid. Asoka will not accept collect
shipments.
WHILE ASOKA HAS MADE EVERY EFFORT TO PROVIDE CLEAR AND ACCURATE
TECHNICAL INFORMATION ABOUT ITS PRODUCTS, ASOKA ASSUMES NO
LIABILITY FOR ANY EVENTS ARISING OUT OF THE USE OF THE TECHNICAL
INFORMATION OR THE PRODUCT, EXCEPT AS SPECIFICALLY PROVIDED IN THIS
AGREEMENT OR AS REQUIRED BY LAW. THE WARRANTIES AND REMEDIES
STATED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR
WRITTEN, EXPRESS OR IMPLIED. ANY AND ALL OTHER WARRANTIES,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS ARE
EXPRESSLY EXCLUDED. ASOKA SHALL NOT BE LIABLE, UNDER ANY
CIRCUMSTANCES, TO ANY PERSON OR ENTITY FOR ANY SPECIAL, INCIDENTAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
DAMAGES RESULTING FROM THE USE OR MALFUNCTION OF THE PRODUCTS,
LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, OR COSTS OF
REPLACEMENT GOODS, EVEN IF ASOKA IS INFORMED IN ADVANCE OF THE
POSSIBILITY OF SUCH DAMAGES.
30 of 34
PlugLink HD AV ECo Adapter User’s Guide
FCC Notice
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including
interference that may cause undesired operati
Note:The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment.such modifications
could void the user’s authority to operate the equipment.
31 of 34
PlugLink HD AV ECo Adapter User’s Guide
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Note:The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment.such modifications
could void the user’s authority to operate the equipment.
32 of 34
PlugLink HD AV ECo Adapter User’s Guide
Asoka USA Corporation
2344 Walsh Avenue Suite A
Santa Clara, California 95051
USA Phone: (408) 550–8167
Fax: (408) 884–2390
www.asokausa.com
66-0360-00Rev.001
33 of 34
PlugLink HD AV ECo Adapter User’s Guide

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:08:26 13:45:47-04:00
Create Date                     : 2009:05:29 11:42:51+08:00
Metadata Date                   : 2009:08:26 13:45:47-04:00
Format                          : application/pdf
Title                           : Microsoft Word - PL9661-ETH-0506
Creator                         : SnoopyPC
Document ID                     : uuid:cf82afe7-d345-4434-8b7a-bee0a78d2b9c
Instance ID                     : uuid:6ede4a3c-1832-4df7-8be9-c925377b3389
Has XFA                         : No
Page Count                      : 33
Author                          : SnoopyPC
EXIF Metadata provided by EXIF.tools
FCC ID Filing: T37PL9661-ETH

Navigation menu