ASSALOY KOREA Unilock ML52RA Digital Cabinet Lock User Manual
ASSA ABLOY KOREA Co., Ltd Unilock Digital Cabinet Lock Users Manual
User Manual
Copyright ⓒ 2017. Lab-T, Inc.
User Manual
How to use the User card (Public mode)
Step 1 Step 2
Beep
Beep-
Public Mode
a
Touch a Master Card for 3 seconds
a
- Short beep
a
b
a
b
a
MASTER
USER
Public mode
Sol-Do~
c
d
b
Touch
for 3 sec s
OR
1
2345
6-1
5
6-2
ML52RA lock x 1
Rubber ring washer x 1
M6 nut x 1
Cams x 2 ( 1 flat, 1 offset)
M4 washer x 2
Bolts x 5
M4 x10 cam fixing
M4 x10 upper fixing for 1-5mm door
M4 x 20 upper fixing for 10-15mm door
M4 x 25 upper fixing for 15-20mm door
M4 x 30 upper fixing for 20-25mm door
1
2
3
4
5
6
6-1
6-2
Instruction Manual (ML52RA)
Package contained Installation
How to use the User card (Private mode)
Lock the door 문을 열때 문을 잠글 때
Unlock the door Unlock the door Lock the door
Touch the User Card
a
- Blinking Red LED 3 times and melody
sound "Sol-Do~"
b
Turn the handle to the lock position
-Blinking yellow LED 3 times and melody
sound "Do-Mi-Sol~"
b
Touch the User Card
a
Turn the handle to the open position
and open the door
※ Public Mode (One Time use)
- User Card will be erased
after unlock and stay open for next user.
Touch a registered User Card
Turn the handle to the open position
and open the door
a
b
Close the door and turn the handle
to the lock position
a
※ Private Mode (Assigned use)
- The lock automatically locked in 3 seconds,
just turn the handle to the lock position.
-Blinking yellow LED 3 times and melody
sound "Do-Mi-Sol~"
How to switch between Public Mode & Private Mode External Power for Emergency
Step 1 Step 2
b
Private Mode
Orange LED blinks 2 times with melody sound
“Beep-”
Orange LED blinks 3 times with melody sound
“Sol-Do~”
d
ac
b
Connect standard 5 pin Micro USB cable
to the USB Port on the right side of the lock
When power is applied, Both LED blinks
5 times with melody sound
“Do-Mi-Sol~Sol-Do”
Touch a User Card or Master Card to unlock
Open the door and change all 3 batteries
User card will be deleted after use of the Master card.
Need to set the User card again at private mode
b-1
Private mode
b-2
Sol-Do~
Blinking
3 times
Do-Mi-Sol~
Blinking
3 times
Do-Mi-Sol~
Sol-Do~
Blinking
3 times
Blinking
3 times
Blinking
fot 3 secs
Blinking
1 time
Blinking
3 times
a
b
b
Do-Mi-Sol~
Sol-Do
Blinking
5 times
Ø5
Ø17
129
Installation Template
Caution
-Risk of explosion if battery is replaced
by an incorrect type.
-Dispose of used batteries according to
the instruction.
※ Use three 1.5V AAA type Alkaline batteries.
Specific
- 13.561 MHz
- 4.5Vdc (AAA 1.5x3)
CLEAN
Touch a Master Card
for 8 seconds.
Detach the Master Card
right after three beeps
d
ac
Touch another card to set it
as a new Master.
(Up to 20 Master Cards can be registered)
f
※ Cleaner Card setting mode
will be started after Master Card
setting mode.
How to change Master Card
※ After Master Card setting mode,
Cleaner Card setting mode will be started automatically
Touch a card to register it as a Master
- Red LED blinks for 8 secs with melody sound
“Sol-Do~”
a
b
※ Cleaner card can be used at Private mode only
After Master Card setting mode,
starts Cleaner Card setting mode
Touch same card twice to stop the User Card setting mode.
c
Touch another card up to 20 in sequence
for setting up to 20 Masters
Touch another card up to 20 in sequence
for setting up to 20 Cleaners
Toch same card twice to stop Master Card setting mode
Step 1 : Setting Master Card
Touch a User Card
Touch any Master Card
(Yellow LED blinks for 8 seconds)
be
h
Touch any Master card
to delete the User key
Motor
noise
Touch for
8 secs
- During RED LED blinking
for 8 seconds
Beep-Beep
Beep-
Cleaner card
setting mode
Touch the Master Card twice
to stop setting of the Master Card
Sol-Do~
Completed the Master Card
chang e mode
Beep-
Touch any Master Card
for 8 seconds
Detach the Master card
right after three beeps
d
ac
During Orange LED blinking
for 8 seconds after a beep
f
be
Wait for 8 seconds until
Red LED blinking
Touch another card to set it
as a new Cleaner
Beep~
g
Touch last Cleaner Card twice
to stop Cleaner Card setting mode
Completed the Cleaner Card change mode
Beep-
(First touched card will be registered as a Master)
CLEAN
Sol-Do~
dg
g
First, Touch
the Master card
h
j
j
CLEAN
Beep-
Beep-
Sol-Do~
3-1 3-2
2
1
1-1
※ Touch last Master card three times or wait
for 8 seconds at Master card setting mode
if no need to set a Cleaner card
Precautions for Cleaner Card
Touch a card to set the card as a User.
(Up to 20 User Cards can be registered.)
ASSA ABLOY Korea Co., Ltd Unilock
5F of IREVO bldg, 205-29, Gasandigital 1-Ro, Guemcheon-Gu, SEOUL, 08503
Tel : +82 1644 3526 (200) Web : www. unilock.co.kr
- Stop Red LED blinking and Orange LED started to blink
e
f
Touch same card twice to stop Cleaner Card
setting mode
Step 2 : Setting Cleaner Card Step 3 : Setting User Card
i
Public ModePrivate Mode
-Red LED blinks 3 times
with melody sound “Sol-Do~”
Step 1 Step 2 Step 3 Step 4 Step 5
How to change Cleaner Card
Public Mode
Private Mode Skip this step
Step 1 Step 2 Step 3 Step 4 Step 5 Step 6
Touch any Master card
to delete the User key
Public Mode
Private Mode Skip this step
Blinking
for 8 secs
Sol-Do~
Blinking
for 8 secs
Blinking
for 8 secs
Sol-Do~
Blinking
for 8 secs
Blinking
3 times
Beep-Beep-Beep-
Beep-Beep-
Blinking
5 times
Blinking
5 times
Beep-Beep-Beep-
Beep-Beep-
Blinking
for 8 secs Blinking
for 8 secs Blinking
for 8 secs
Beep-Beep
Beep-
Sol-Do~
Blinking
for 8 secs Blinking
for 8 secs
Blinking
for 8 secs
Touch for
8 secs
Motor
noise
Change the Card
Setting Master, User & Cleaner Card
※ Be aware of using Cleaner Card.
Cleaner card can be used without trace
even if the cabinet is in use.
※ FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
※This appliance and its antenna must not be co-located or operation in conjunction
with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.