ASUSTeK Computer A007 ASUS Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3500219
Application ID	OgTK4ympMvalx0sbtMEqhA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.63kB (907929 bits)
Date Submitted	2017-08-08 00:00:00
Date Available	2018-02-05 00:00:00
Creation Date	2017-07-26 15:50:59
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-08-02 17:08:08
Document Title	User manual
Document Creator	Adobe InDesign CS6 (Windows)

Side features
Revised Edition/ July 2017
Model: ASUS_A007 (ZB501KL)
Rear features
Audio jack Microphone
Rear camera
Camera flash
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
Nano SIM1,
Nano SIM2
/ MicroSD
combo card
slot
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Volume key
Rear cover
Power key
Front features
User Guide
LED indicator
Camera Flash
Proximity sensor
and light sensor
Charging your ASUS Phone
Front camera
Receiver
Speaker
Microphone
Micro USB port
Touch screen
display
To charge your ASUS Phone:
1.
Connect the USB connector into the power
adapter’s USB port.
2.
Connect the other end of the micro USB cable
to your ASUS Phone.
3.
Plug the power adapter into a wall socket.
NOTES:
•
•
The Nano SIM card slots support LTE,
WCDMA and GSM/EDGE network bands.
The microSD card slot supports microSD and
microSDXC card formats.
Touch keys
E13301
IMPORTANT!
•
When using your ASUS Phone while it is
plugged to a power outlet, the grounded
power outlet must be near to the unit and
easily accessible.
•
When charging your ASUS Phone through
your computer, ensure that you plug the USB
cable to your computer’s USB 2.0 port.
•
Avoid charging your ASUS Phone in an
environment with ambient temperature of
above 35oC (95oF).
NOTES:
•
For safety purposes, use ONLY the bundled
power adapter and cable to avoid damaging
your device and prevent the risk of injury.
•
For safety purposes, use ONLY the bundled
power adapter and cable to charge your
ASUS Phone.
•
The input voltage range between the wall
outlet and this adapter is AC 100V - 240V.
The output voltage of the micro USB cable is
+5.2V 1A, 5.2W.
2.
Insert the Nano SIM or MicroSD card(s) into
the card slot(s).
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Nano SIM
Micro SD
IMPORTANT: You can only use the Nano SIM2
card or the MicroSD card at a time.
3.
Push the tray to close it
Installing a Nano SIM /MicroSD card
To install a Nano SIM / MicroSD card:
1.
Push a pin into the hole on the Nano SIM /
MicroSD card tray to eject it.
Federal Communications Commission
Statement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment.
The antenna(s) used for this transmitter must not be colocated or operated in conjunction with any other antenna
or transmitter.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
IMPORTANT: When two SIM cards are inserted,
only one SIM card slot supports 4G/3G/2G service.
The other SIM card slot only supports 2G service.
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
CAUTION!
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
•
Do not use sharp tools or solvent on your
device to avoid scratches on it.
Use only a standard Nano SIM card on your
ASUS Phone.
•
Consult the dealer or an experienced radio/TV
technician for help.
The country code selection is for non-US models only and
is not available to all US models. Per FCC regulation, all
WiFi products that are marketed in US must be fixed to
US-operated channels only.
RF Exposure Information (SAR)
This device has been tested and meets applicable limits
for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at which
the body absorbs RF energy. SAR limits are 1.6 Watts
per kilogram (over a volume containing a mass of 1 gram
of tissue) in countries that follow the United States FCC
limit and 2.0 W/kg (averaged over 10 grams of tissue) in
countries that follow the Council of the European Union
limit.
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest
certified power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device from
your head and body. Carry this device at least 15 mm
away from your body to ensure exposure levels remain
at or below the as-tested levels. Choose the belt clips,
holsters, or other similar body-worn accessories which do
not contain metallic components to support operation in
this manner. Cases with metal parts may change the RF
performance of the device, including its compliance with
RF exposure guidelines, in a manner that has not been
tested or certified, and use such accessories should be
avoided.
The highest FCC SAR value for the device are as follows:
•
1.06 W/kg @1g(Head)
0.94 W/kg @1g(Body)
The FCC has granted an Equipment Authorization for
this device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can
be found under the Display Grant section of www.fcc.gov/
oet/ea/fccid after searching on FCC ID: MSQA007.
•
EU Radio Equipment Directive
Compliance
Items
Maximum Radio-Frequency Output Power Table
Safety information
CE Marking
LTE Band I (1920~1980;
2110~2170 MHz)
23.91 (dBm)
LTE Band III (1710~1785;
1805~1880 MHz)
23.98 (dBm)
LTE Band VII (2500~2570;
2620~2690 MHz)
21.76 (dBm)
LTE Band VIII (880~915; 927~960
MHz)
23.86 (dBm)
LTE Band XX (832~862; 791~821
MHz)
23.81 (dBm)
To use the GPS positioning feature on your ASUS
Phone:
RF Output Table
LTE Band XXVIII (703~748 ;
758~803 MHz)
23.54 (dBm)
•
Items
LTE Band XXXVIII (2570~2620
MHz)
23.56 (dBm)
Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
LTE Band XL (2300~2400 MHz)
23.3 (dBm)
•
For first-time use of a GPS-enabled app on
your device, ensure that you are outdoors to
get the best positioning data.
Simplified EU Declaration of Conformity
Hereby, ASUSTek Computer Inc. declares that the
radio equipment ASUS_A007 is in compliance with
Directive 2014/53/EU. Full text of EU declaration
of conformity is available at https://www.asus.com/
support/. (Search for ZB501KL)
LTE
Maximum Radio-Frequency Output Power Table
Bluetooth RF (2400~2483.5 MHz)
Bluetooth Bluetooth 4.0-LE (2400~2483.5
MHz)
WLAN
10.31 (dBm)
1.19 (dBm)
15.33 (dBm)
2.4GHz 802.11g (2400~2483.5
MHz)
13.41 (dBm)
2.4GHz 802.11n HT20
(2400~2483.5 MHz)
12.41 (dBm)
5GHz 802.11a (5150~5250;
5250~5350; 5470~5725 MHz)
N/A (dBm)
ASUS_A007(ZB501KL)
5GHz 802.11an HT20 (5150~5250;
5250~5350; 5470~5725 MHz)
N/A (dBm)
•
Head: 0.51 W/Kg
5GHz 802.11an HT40 (5150~5250;
5250~5350; 5470~5725 MHz)
N/A (dBm)
•
Body: 1.58 W/Kg
5GHz 802.11ac HT80 (5150~5250;
5250~5350; 5470~5725 MHz)
N/A (dBm)
GSM 900 Burst (880~915; 925~960 33.24 (dBm)
MHz)
GSM
WCDMA
RF Exposure Information
2.4GHz 802.11b (2400~2483.5
MHz)
GSM 1800 Burst (1710~1785 ;
1805~1880 MHz)
30.6 (dBm)
WCDMA Band I (1920~1980 ;
2110~2170 MHz)
23.31 (dBm)
WCDMA Band VIII (880~915 ;
927~960 MHz)
23.41 (dBm)
This ASUS product has been tested and meets
applicable European SAR limits. The SAR limit is
2.0 W/kg in countries (1.6W/kg in India) that set the
limit averaged over 10 grams of tissue. The specific
maximum SAR values for this device are as follows:
•
•
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
The charger
•
Use only the charger supplied with your ASUS
Phone.
•
Never pull the charger cord to disconnect it
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C (32 °F) and 35 °C (95 °F).
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shock or fire may result.
•
Do not short-circuit the battery terminals with
metal items.
Using GPS (Global Positioning
System) on your ASUS Phone
•
When using a GPS-enabled app on
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen
at high volume levels for long periods.
ASUS_A007(ZB501KL) for IN/ID/TH
•
Max: 0.98 W/Kg
•
•
Head: 0.576 W/Kg
•
Body: 1.34 W/Kg
When carrying this device or using it while worn on
the body, either use an approved accessory such
as a holster or otherwise maintain a distance of 0.5
cm from the body to ensure compliance with RF
exposure requirements.  
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
ASUS Recycling/Takeback
Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
India E-waste (Management) Rules
2016
This product complies with the “India E-Waste
(Management) Rules, 2016” and prohibits
use of lead, mercury, hexavalent chromium,
polybrominated biphenyls (PBBs) and
polybrominated diphenyl ethers (PBDEs) in
concentrations exceeding 0.1% by weight in
homogenous materials and 0.01 % by weight in
homogenous materials for cadmium, except for the
exemptions listed in Schedule II of the Rule.
For France, headphones/earphones for this
device are compliant with the sound pressure level
requirement laid down in the applicable EN 503321:2013 and/or EN50332-2:2013 standard required
by French Article L.5232-1.
Proper disposal
Risk of explosion if battery is
replaced by an incorrect type.
Dispose of used batteries
according to the instructions.
DO NOT throw the battery in
municipal waste. The symbol of the
crossed out wheeled bin indicates
that the battery should not be placed
in municipal waste.
DO NOT throw this product in
municipal waste. This product has
been designed to enable proper
reuse of parts and recycling. The
symbol of the crossed out wheeled
bin indicates that the product
(electrical, electronic equipment
and mercury-containing button
cell battery) should not be placed
in municipal waste. Check local
regulations for disposal of electronic
products.
DO NOT throw this product in fire.
DO NOT short circuit the contacts.
DO NOT disassemble this product.
Use your ASUS Phone in an environment with
ambient temperatures between 0 °C (32 °F) and
35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
•
Do not remove the non-detachable Li-polymer
battery as this will void the warranty.
•
Avoid charging in extremely high or low
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
•
Do not remove and replace the battery with a
non-approved battery.
•
Do not remove and soak the battery in water or
any other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed
or allowed to come into contact with unprotected
skin.
•
Do not remove and short-circuit the battery, as
it may overheat and cause a fire. Keep it away
from jewelry or metal objects.
•
Do not remove and dispose of the battery in fire.
It could explode and release harmful substances
into the environment.
•
Do not remove and dispose of the battery with
your regular household waste. Take it to a
hazardous material collection point.
•
Do not touch the battery terminals.
ASUS_A007(ZB501KL) for JP
Operator access with a tool
NOTES:
ASUS Phone care
ASUS
Address: 4F, No.150 Li-Te Rd., Peitou, Taipei,
Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
Copyright © 2017 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website,  and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2017:07:26 15:50:59+08:00
Metadata Date                   : 2017:08:02 17:08:08+08:00
Modify Date                     : 2017:08:02 17:08:08+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:33bcf1be-c98b-4333-936b-8bd8ab5e4950
Original Document ID            : xmp.did:56477ECB29A1E411AC55B9AF3A574922
Document ID                     : xmp.id:AE5F062AD771E71182558BFA88A8EED6
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:874F411FD771E71182558BFA88A8EED6
Derived From Document ID        : xmp.did:AC4AE427316CE7119261EC444C91DA1B
Derived From Original Document ID: xmp.did:56477ECB29A1E411AC55B9AF3A574922
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:07:26 15:51+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools