ASUSTeK Computer ASUSNFC-PN544 NFC Sensor Module User Manual TempConfidential ASUS NFC PN544 UserMan 20130603

Download:
Mirror Download [FCC.gov]
Document ID	1980838
Application ID	qth5NU0x3iaUNJiHNmkIRg==
Document Description	TempConfidential_(ASUS NFC-PN544) UserMan_20130603
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.45kB (205628 bits)
Date Submitted	2013-06-03 00:00:00
Date Available	2013-11-30 00:00:00
Creation Date	2013-05-31 16:04:59
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2013-05-31 16:05:08
Document Title	TempConfidential_(ASUS NFC-PN544) UserMan_20130603
Document Creator	Acrobat PDFMaker 10.1 for Word
Document Author:	Sylvia Hsiao(蕭清華)

ASUS NFC-PN544
MODULE
User Manual
I.
Introduction:
ASUS NFC-PN544 is a module equipped with both NFC and USB3.0 Hub functions. It
can be connected to Windows based systems by USB3.0 A to A type cable. The
USB3.0 Hub is activated by embedded driver of Intel chipset(PCH) and the NFC is
activated by NXP provided driver(only available on Win8)
II. Design Reference:
ASUS NFC-PN544 is composed as the following:
a) USB3.0 hub IC: This section includes Asmedia ASM1074 chip and its external
components completed refer to the reference design. An addtional EEPROM is
utilized to store the corresponding FW. Note this module only applies bus power
from USB port.
b) NFC IC: This section includes NXP PN544 C3 chip and the external components
completed refer to the reference design. The antenna design is also based on the
refernce design of NXP PN544 demo board(schematic, layout, BOM etc). The
driver provided by NXP is applicable only on Windows 8.
c) USB to UART convertor IC: Exar XR21B1411 is adopted to bridge from USB3.0 Hub
IC to NFC IC, PN544C3 communicates with the connected system by UART
interface. The driver is available on line.
d) 1 A type USB3.0 upstream port connector: the main connection port to a
Windows based system, an A to A type USB3.0 cable is necessary.
e) 2 A type USB3.0 downstream port connectors: for external devices certificated by
USB compliance, and are applicable up to USB3.0.
f) 5 white LEDs: to indicate the power of USB bus is on.
Note: there is no external power design for this module, heavy loading behaviors (ex. 2 USB
removable HDDs data R/W concurrently) on USB devices is not advised.
III. Feature:
Contactless protocols: ISO14443A/B, ISO15693, ISO18092 USB compliance: USB3.0,
USB2.0, USB1.1
IV. Spec sheet:
Antenna: On board PCB trace (size 32mm*54mm), basically a loop coil, formed by
PCB trace
Operating frequency: 13.56MHz
Data rate: up to 848kbps
Modulation: Manchester, ASK, BPSK
V. Product Overview
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of
this device could void the user's authority to operate the equipment.
Labeling requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et
RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne
doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence,
notamment les interférences qui peuvent affecter son fonctionnement.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: "Contains FCC ID:
MSQ-ASUSNFC-PN544 ” and "Contains IC: 3568A-ASNFC-PN544“
Information for the OEMs and Integrators
The following statement must be included with all versions of this document supplied to
an
OEM or integrator, but should not be distributed to the end user.
1) This device is intended for OEM integrators only.
2) Please see the full Grant of Equipment document for other restrictions.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Sylvia Hsiao(蕭清華)
Create Date                     : 2013:05:31 16:04:59+08:00
Modify Date                     : 2013:05:31 16:05:08+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:05:31 16:05:08+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:3c64465d-a6fd-478a-87da-33981a76b2f3
Instance ID                     : uuid:9e113ecc-0933-4f32-8f23-abc2600eacdd
Subject                         : 2
Format                          : application/pdf
Title                           : 
Creator                         : Sylvia Hsiao(蕭清華)
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20130531074734
Company                         : 
Page Layout                     : OneColumn
Page Count                      : 6

EXIF Metadata provided by EXIF.tools