ASUSTeK Computer ASUSWLCHARGER WPC Qi 1.1/1.0 compliance wireless charging micro-USB box User Manual TempConfidential Wireless Charger UserMan 20140418

ASUSTeK Computer Inc WPC Qi 1.1/1.0 compliance wireless charging micro-USB box TempConfidential Wireless Charger UserMan 20140418

UserManual.wiki >

ASUSTeK Computer >

ASUSWLCHARGER User Manual

TempConfidential_(Wireless Charger) UserMan_20140418

DRAFT 1 DRAFT 1Using Photo ExpressThe Photo Express function allows you to transfer, sync, and back up your photos and videos from your NFC-enabled device to your computer. You can enable this function from your computer or from your NFC-enabled device.IMPORTANT! • Photo Express auto-syncs photos and videos that have not been synced with your computer.• Photo Express transfers les that are saved in your NFC-enabled device’s default photo and video folders only.Enabling Photo Express from your computer 1. Install Wi-Fi GO! or Remote GO! on your computer.NOTE: Download Wi-Fi GO! or Remote GO! from ASUS Support site at support.asus.com2. Launch ASUS NFC EXPRESS 2 or PC or Wi-Fi GO! NFC Remote on your computer and click or tap Photo Express tab.3. Put your NFC-enabled device on the ASUS NFC EXPRESS 2 box, and tap the screen.4. Put your NFC-enabled device on the ASUS NFC EXPRESS 2 box, and tap the screen to transfer, auto-sync, and back up your photos and videos.Using Video-to-goStream videos from your PC to your NFC-enabled device or vice versa using Video-to-go.Enabling Video-to-go from your computer1. Install ASUS Media Streamer to your computer using the bundled support CD.2. Download the ASUS Media Streamer app from the Google Play Store to your NFC-enabled device. 3. Launch the ASUS Media Streamer program then locate the video le you would like to stream. 4. Put your NFC-enabled device on the ASUS NFC EXPRESS 2 box to start streaming the video le. Streaming videos to your Smart TV1. Launch NFC Express 2 from your computer.2. Select a device and write its NFC information into the NFC tag. 3. Place the NFC tag on the ASUS NFC Express 2 box to stream the video content to the smart TV. 4. (optional) You can also stream the content to an NFC-enabled device then tap the ASUS NFC tag to it to start streaming to your smart TV.Using Bluetooth PairingStream music les played from your NFC-enabled device to your PC using Bluetooth pairing.Pairing your NFC-enabled device with your computer1. Launch ASUS HomeCloud on your computer and Download the ASUS Wi-Fi GO! & NFC Remote app from the Google Play store to your NFC-enabled device. 2. On the ASUS HomeCloud screen, select the Bluetooth Pairing tab.3. Put your NFC-enabled device on the ASUS NFC EXPRESS 2 box, and tap the screen to start pairing.4. Once pairing is successful, select the music le from your device. 5. Tap your NFC-enabled device on the ASUS NFC EXPRESS 2 box to launch the music player toolbar on your computer then click Play.NOTE: When pairing your NFC-enabled device for the rst time, a disconnection notice appears on your device due to an A2DP prole limitation. Just tap again your NFC-enabled device on the ASUS NFC Express 2 box to begin streaming music and playing it on your computer’s speaker. Federal Communications Commission StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2)This device must accept any interference received including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.Labeling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE: European Community Compliance StatementThe equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic elds (0–300 GHz). This wireless device complies with the R&TTE Directive.Canadian Department of Communications StatementThis digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.This class B digital apparatus complies with Canadian ICES-003.IC: Canadian Compliance StatementComplies with the Canadian ICES-003 Class B specications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. Australia statement noticeFrom 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit http://support.asus.com. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.comOffer to Provide Source Code of Certain SoftwareThis product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: ASUSTeK Computer Inc. Legal Compliance Dept.15 Li Te Rd.,Beitou, Taipei 112, TaiwanIn your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.This offer is valid to anyone in receipt of this information.ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notication to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).ASUS Wireless Charger Notice for DenmarkApparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.15060-xxxxxxxxREACHComplying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.Using Remote DesktopThe Remote Desktop function allows you to remotely access and control your computer from your NFC-enabled device. You can enable this function from your computer or from your NFC-enabled device.Enabling Remote Desktop from your computer1. Install Wi-Fi GO! or Remote GO! on your computer.NOTE: Download Wi-Fi GO! or Remote GO! from ASUS Support site at support.asus.com2. Launch ASUS NFC EXPRESS 2 on your computer and click or tap Remote Desktop tab.3. Put your NFC-enabled device on the ASUS NFC EXPRESS 2 box, and tap the screen.Enabling Remote Desktop from NFC-enabled devices1. Launch Wi-Fi GO! & NFC Remote, and tap Enter under NFC EXPRESS.2. On the ASUS NFC EXPRESS 2 screen, tap Remote Desktop. 3. Put your NFC-enabled device on the ASUS NFC EXPRESS 2 box, and tap the screen.E9366Revised Edition V2April 2014NCC WarningKCC WarningASUS Recycling/Takeback ServicesASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : NFC Receiver for PC Control and 2-port USB 3.0 Hub Model name : NFC EXPRESS, NFC EXPRESS 2 conform with the essential requirements of the following directives: 2004/108/EC-EMC Directive EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2008 EN 55020:2007+A11:2011 1999/5/EC-R&TTE Directive EN 300 328 V1.7.1(2006-10) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V5.2.1(2011-05) EN 301 908-2 V5.2.1(2011-07) EN 301 893 V1.6.1(2011-11) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001 EN 62479:2010 EN 50385:2002 EN 62311:2008 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.4.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) 2006/95/EC-LVD Directive EN 60950-1 / A12:2011 EN 60065:2002 / A12:2011 2009/125/EC-ErP Directive Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EC) No. 617/2013 2011/65/EU-RoHS Directive Ver. 140331 CE marking Declaration Date: 02/04/2014 Year to begin affixing CE marking: 2014 Position : CEO Name : Jerry Shen Signature : __________ (EC conformity marking) EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name :  Model name :  conform with the essential requirements of the following directives: 2004/108/EC-EMC Directive EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55011:2009+A1:2010, Class B EN 55024:2010 EN 61000-3-3:2008 EN 55020:2007+A11:2011 EN 61000-6-2:2005 1999/5/EC-R &TTE Directive EN 300 328 V1.7.1(2006-10) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V5.2.1(2011-05) EN 301 908-2 V5.2.1(2011-07) EN 301 893 V1.6.1(2011-11) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001 EN 62479:2010 EN 50385:2002 EN 62311:2008 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.4.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) 2006/95/EC-LVD Directive EN 60950-1 / A12:2011 EN 60065:2002 / A12:2011 2009/125/EC-ErP Directive Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EC) No. 617/2013 2011/65/EU-RoHS Directive Ver. 130816 CE marking Declaration Date: 20/03/2014 Year to begin affixing CE marking: 2014 Position : CEO Name : Jerry Shen Signature : __________ (EC conformity marking) DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : NFC Receiver for PC Control and 2-port USB 3.0 Hub Model Number : NFC EXPRESS, NFC EXPRESS 2 Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Representative Person’s Name : Steve Chang / President Signature : Date : Apr. 02, 2014 Ver. 140331 Safety Notices for ASUS NFC Express 2Warranty NoticeCAUTION! Any changes or modication not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.E9366_NFC_Express_2_and_ASUS_Wireless_Charger_User_Guide_V2.indd 2 2014/4/18 �� 03:48:49

Navigation menu