ASUSTeK Computer K009 ASUS Tablet User Manual Statement

ASUSTeK Computer Inc ASUS Tablet Statement

Contents

User Manual(Statement)

© 2013 ASUSTek COMPUTER INC.All rights reserved.Edition 1.05No part of this guide, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language inany form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTek COMPUTER INC. (“ASUS”). This clausedoes not apply to such software which is licensed under the General Public License (“GPL” ) or other Free Open Source Licenses. Copies of the respective license terms, and where required an offer to provide the respective source code, are included in the product.ASUS and the ASUS logo are trademarks of ASUSTek Computer Inc. All other marks and trademarks are properties of their respective owners.Some information in this guide may differ in some details from the product or its software. All information in this document is subject to change without notice.The Nexus 7 tablet is certified by ASUS under the name ASUS Pad K009.1
SIM Card TipsWarning: The SIM card ejection tool and SIM card tray included with Nexus 7 are very small objects that represent a potential choking hazard. Please keep them out of reach of small children.To install and activate a new SIM card:1. Turn your tablet off and place it on a flat surface with the screen facing up.2. Tilt up the right side slightly and locate the SIM card tray near the bottom, and the small hole in the tray door.3. Insert the SIM ejection tool that comes with the tablet (or a paperclip) into the hole in the tray door, and push firmly but gently until the tray pops out.4. Remove the tray and place the micro SIM card inside it, with the contacts facing up and the angled corner fitting snugly into the angled corner of the tray.5. Reposition the tray in the slot and push it gently back into the tablet.6. On your tablet, open the Settings app and turn off Wi-Fi. You’ll soon see a notification at the top of your screen. It may take a minute or more to arrive.7. Swipe down from the top of your tablet and touch the notification.8. Follow the activation instructions provided by your carrier.2
Safe TemperatureUse Nexus 7 only in environments with ambient temperatures between 0°C (32°F) and 35°C (95°F).Airplane precautionsCheck with airline personnel if you want to use your Nexus 7 on board an aircraft. Most airlines have restrictions for using electronic devices. Most airlines allow electronic use only between and not during takeoffs and landings.There are three main types of airport security devices: X-ray machines (used on items placedon conveyor belts), magnetic detectors (used on people walking through security checks), andmagnetic wands (hand-held devices used on people or individual items). You can send yourNexus 7 through airport X-ray machines. But do not send your Nexus 7 through airport magneticdetectors or expose it to magnetic wands.3
FCC RF Exposure RequirementsNexus7 K009The highest SAR value for the device as reported to the FCC is 1.45 W/kg when placed next to the body.Radiation Exposure Statement:This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.K009 CE SAR(Max SAR 10g,0.879 W/Kg @ 1.2 cm)4
Federal Communication CommissionInterference StatementThis device complies with part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment andreceiver.• Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TVtechnician for help.FCC CautionAny Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.Operations in the 5.15-5.25GHz band are restricted to indoor usage only.Limitation of LiabilityCircumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties5
under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.Industry Canada StatementThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Radiation Exposure StatementThe product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user's body or set to lower output power if such function is available.6
Déclaration d'exposition aux radiationsLe produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé.Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Caution :(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment :(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.;(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.A minimum separation distance of 1.2 cm must be maintained between the user’s body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe.7
8
Hearing WarningThis device has been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332-1and/or EN 50332-2 standards. Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time.To prevent possible hearing damage, do not listen at high volume levels for long periods.Warning statement:A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur.To prevent possible hearing damage, do not listen at high volume levels for long periods.9
Declaration of ConformityEurope – EU Declaration of ConformityThis device complies with the essential requirements of theR&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTEDirective 1999/5/EC:EN 60950-1: 2006+A11:2009:+A1:2010+A12:2011EN 62479: 2010EN 62209-2: 2010EN 62311: 2008EN 50332-2:2003EN 300 328 V1.7.1: 2006Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE DirectiveEN 301 908-1 V5.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE DirectiveEN 301 908-2 V5.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE DirectiveEN 301 511 V9.0.2: 2003Global System for Mobile communications (GSM); Harmonized standard for mobile stations in the GSM 900 and DCS 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)EN 301 489-1 V1.9.2: 2011Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirementsEN 301 489-3 V1.4.1 EN 301 489-7 V1.3.1: 200510
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment ad services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)EN 301 489-17 V2.2.1 2009Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipmentEN 301 489-24 V1.5.1: 2010Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment EN 300 440-1 V1.6.1:2010/-2 V1.4.1:2010EN 302 291-1 V1.1.1 / -2 V1.1.1EN 301 893 V1.6.1EN 55022: 2010EN 55024: 2010EN 301 908-13CE mark warningCE marking for devices with wireless LAN/BluetoothThis equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunication Equipment and mutual recognition of conformity.This equipment may be operated in all member states of the EU as well as Switzerland, Norway and Iceland. In France, this equipment may be used in-door only.For further details, please see www.arcep.fr.11
12
Safety Warnings• Do not disassemble or open crush, bend or deform, puncture, or shred.• Do not modify or remanufacture, attempt to insert foreign objects into the tablet, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.• Use only an authorized service provider to replace the battery.• Avoid dropping the tablet. If you do drop it and suspect that it’s been dropped, take it to a service center for inspection.• Improper use may result in a fire, explosion, or other hazard.• The USB charging unit varies by country or region.• Use only the USB charging unit that comes with your Nexus 7. Using a different charging unit may damage your tablet.• To avoid risk of injury or damaging your device, connect the charging unit and USB cable before charging your tablet.• The input voltage range between the wall outlet and this charging unit is AC 100V–240V, and the charging unit’s output voltage is DC 5.2V, 1.35A.• Your Nexus 7 can be charged via the USB port on a computer only when Nexus 7 is in sleep mode (screen off) or turned off. Charging through the USB port will take longer than chargingwith the USB charging unit.• Make sure the wall socket where you plug in the charging unitis easily accessible and near your Nexus 7.DO NOT throw Nexus 7 in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.13

Navigation menu