ASUSTeK Computer O2Z1 Cellphone with WLAN & Bluetooth User Manual Revised

ASUSTeK Computer Inc Cellphone with WLAN & Bluetooth Users Manual Revised

Contents

Users Manual Revised

User Manual O2/Xda Zinc PDA PhoneMars II
2E2694First Edition V1 June 2006Copyright © 2006 O2 Co. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
3Table of ContentsMarsII specications ............................................................................. 8Package contents .................................................................................. 9Chapter 1: Getting startedGetting to know your MarsII ............................................................... 12Layout ..................................................................................................... 12Device components description .................................................................... 14The QWERTY kayboard ............................................................................... 14Getting your device ready ................................................................... 16Installing the SIM card and battery................................................................ 16Charging the battery...................................................................................... 18Starting up ............................................................................................ 19Powering your device .................................................................................... 19Using the stylus ............................................................................................. 19Calibrating MarsII .......................................................................................... 20Locking the keys and buttons........................................................................ 20The Today screen ................................................................................ 21Status indicators............................................................................................ 22Screen orientation ......................................................................................... 25Start menu..................................................................................................... 26
4Chapter 2: Entering dataUsing the Input Panel .......................................................................... 28Using the Block Recognizer .......................................................................... 28Using the on-screen keyboard ...................................................................... 29Using the Letter Recognizer.......................................................................... 30Using the Transcriber .................................................................................... 32Writing and drawing on the screen .................................................... 33Recording voice ................................................................................... 34Using ActiveSync™ ............................................................................. 36Synchronizing via USB.................................................................................. 38Synchronizing via Bluetooth .......................................................................... 39Synchronizing via Infrared (IR)...................................................................... 39Synchronizing with Exchange Server ................................................ 40Setting the synchronization schedule............................................................ 42Searching information ......................................................................... 43Getting Help ......................................................................................... 44Chapter 3: Phone featuresUsing phone ......................................................................................... 46Phone pad ..................................................................................................... 46Using ight mode .......................................................................................... 46Adjusting the device volume ......................................................................... 47Making a call ........................................................................................ 48Using the keypad .......................................................................................... 48
5Using the phone pad ..................................................................................... 48Making calls from Contacts ........................................................................... 50Making calls from Call History ....................................................................... 50Using the Speed Dial .................................................................................... 51Using Voice Command.................................................................................. 52Receiving a call .................................................................................... 53Chapter 4: Wireless featuresUsing Bluetooth® ................................................................................. 56 Overview ....................................................................................................... 56Activating Bluetooth in your device ............................................................... 56Conguring Bluetooth ................................................................................... 57Using WLAN (IEEE 802.11b) ............................................................... 63Introduction ................................................................................................... 63Activating WLAN in your device .................................................................... 63Conguring WLAN ....................................................................................... 64Using Infrared (IR) ............................................................................... 66Setting a GPRS connection ................................................................ 67Connecting GPRS ......................................................................................... 70Disconnecting GPRS .................................................................................... 71Using the GPRS Tool .................................................................................... 72Chapter 5: Multimedia featuresUsing the camera ................................................................................. 86Launching the camera................................................................................... 86
6Joystick functions in camera mode ............................................................... 87Camera mode screen.................................................................................... 89Taking photos ................................................................................................ 97Video mode screen ..................................................................................... 101Recording videos ........................................................................................ 107Viewing pictures and video ...............................................................111Viewing pictures and video ..........................................................................111Chapter 6: Device components statusCPU mode setting ....................................................................................... 125System information ..................................................................................... 121Restoring default factory settings ................................................................ 122USB setting ................................................................................................. 125LCD Brightness ........................................................................................... 126Battery ................................................................................................... 126Memory ................................................................................................... 127Storage card memory.................................................................................. 127Programs running in memory ...................................................................... 128Settings ................................................................................................... 128AppendixNotices ................................................................................................ 130Contact information ........................................................................... 134
7MarsII specicationsProcessor Intel® PXA270 520MHZ application processorOperating System Microsoft® Windows Mobile™ 5.0 Pocket PC Phone EditionMemory 128 MB Flash ROM 64 MB RAMDisplay 2.8-inch, 65, 536-color, 240 x 320-resolution, transreective TFT touch screen LCDFrequency band GSM (900/1800/1900 MHz), WCDMA2100GPRS Class B, Multislot class 10Connectivity Wi: 802.11b+g, Bluetooth: V2.0, Infrared: SIR, USB: USB Client 1.1Camera 2.0 mega-pixel CMOS camera with Auto-Focus (AF) and built-in ash Battery capacity 1300 mAh Lithium IonExpansion slots MiniSD card slotAudio 2.5 mm audio port Built-in microphone and speakerWeight 165g (TBF) (with battery)Design Slider with QWERTY keypadDimension 109 x 58 x 22.6 mmNOTE: Specications are subject to change without notice.
8Check your MarsII package for the following items:• ASUS MarsII device x 1• Battery x 1• AC Adapter x 1• USB Cable x 1• Stylus x 1• Protection case x 1• Headset x 1• Companion CD x 1, Bonus CD x 1• User Manual x 1• Quick Start Guide x 1NOTE: If any of the above items is damaged or missing, contact your retailer.Package contentsCAUTION: • To reduce risk of re, use only correct battery type. Refer to “Installing the SIM card and battery” section for details. • Do not attempt to disassemble the battery pack. • Dispose of used batteries properly. Inquire from local authorities for proper disposal of battery.
9Getting startedChapter• Getting to know your MarsII• Getting your device ready• Starting up• The Today screen1
10Getting to know your MarsIITop featuresLeft side features Front features1 2 34 57 89 15 10 14 13 12 11 Components: Stylus Power buttonI Volume controller Backlight switch Mini-SD slot Earpiece receiver Notication LED LCD touch screen Call Key Left Soft key Start button Navigation pad Right Soft Key Messaging End Button123456789101112131415166 Layout16
11Getting to know your MarsIIDesigned forWindowsMobileBottom featuresRight side featuresRear features24 23 212220 1918 Components: Self-Portrait Mirror Camera lens Camera ash light Battery compartment Infrared (IR) port Camera button Earphone Jack Mini-USB connector1819202122232417 17
12Device components descriptionNo. Item Description1Stylus Use the stylus to write, draw, or select items on the touch screen.2Power button Press once to set suspend mode or to wake device from sleep mode. Press and hold to turn the power ON or OFF. 3Volume controller Press the arrow buttons to adjust the volume. 4Backlight SwitchUse this switch to adjust the brightness of the LCD touch screen.5Mini-SD slot Allows you to insert a Mini-SD storage card.6Earpiece receiver Allows you to listen to incoming/outgoing calls. 7Notication LED This multi-color LED noties the following: • Green - Phone fully charged. • Flashing green - Network detected. • Red - Phone is charging. • Flashing red - Event notication. • Flashing blue - Bluetooth® or WLAN(IEEE 802.11b) ON. 89LCD touch screen This 2.8-inch, 65536-color, 240 x 320-resolution, transreective touchscreen TFT LCD allows you to write, draw, or make selections using the stylus.10 Call key Press to receive an incoming call or make a call.11 Left Soft key Performs the command indicated above the button.12 Start button Launches the Windows Mobile® start menu.
13Device components descriptionNo. Item Description13 Navigation pad Press this multi-directional control up, down, left, or right to move through menus, program instructions; carry out the selection by pressing the center button.14 Right Soft key Performs the task indicated above the button. 15Messaging Press to quick start your Messaging.16 End button Press to end a call. 17 Self-Portrait Mirror Press this multi-directional control up, down, left, or right to move through menus.18 Camera lens This 2-megapixel camera comes with Auto-Focus (AF) lens and ash light features. 19 Camera ash light Allows you to capture images in a dim environment. 20 Battery compartment Contains the battery that supplies power to the device. 21Infrared (IR) portAllows you to beam data to another device that has an infrared port.22 Camera Button Press to launch the camera. In camera mode, half-press to auto-focus then full-press to take a picture. In video mode, full-press to start recording video and press again to stop.23 Earphone Jack Allows you to listen to audio media or use the phone’s hands-free kit.24 Mini-USB connector Use this connector to synchronize your data or to charge the battery.
14The QWERTY keyboardMarsII device provides you with a QWERTY keyboard, which is similar to a standard PC keyboard. Slide the screen panel to the right to reveal the keyboard (see gure below) .1 2 3 4 5 6 7 8 9 0Q W E R T Y U I O P!=#$%&*()DelA S D F G H J K L“~,`/?CapShift Tab Space .-_+@ ; :Chr zX C V B N MOKNavigation keys Right SOFT keyLeft SOFT keyOK keyCap ShiftStart key
15Using the QWERTY keyboardYou can follow the tips below to use the kayboard• Using “Cap Shift” key to type uppercase letter.• Press the Left/Right SOFT KEY to perform the command shown in the label above the key.• Press “OK” key to verify your data enttries or exit the program in use.• Press “Start” key to launch the Start menu.• Press the navigation keys for directional movement.
16Installing the SIM card and batteryBefore you can make a phone call using your MarsII, you need to install a Subscriber Identity Module (SIM) card. A SIM card contains your phone number, subscriber details, phonebook, and additional phone memory.Your MarsII comes with a rechargeable Lithium-Ion battery.New batteries come partially discharged and should be fully charged before using them. They generally do not reach their rated capacity until they have been charged and discharged at least four (4) times. We recommended that new batteries be charged overnight even though they may indicate that the charge is complete after a few hours. Sometimes charging may stop during the initial charge and it is necessary to remove the battery for approximately fteen (15) minutes and then put it back on charge.Getting your device ready1. Remove the battery compartment over.NOTE: If the device is on, it automatically turns off after you open the battery compartment.CAUTION: Use only an ASUS qualied battery.To install a SIM card and battery:
172. Remove the battery.3. Insert the SIM card with its gold contacts facing down and the notched corner oriented to the upper left corner of the slot as shown.4. Replace the battery into the compartment with its copper contacts aligned to the copper conductor on the device.5. Replace battery compartment cover.
18Charging the batteryThe bundled battery pack is shipped partially charged. Charge the battery up to four (4) hours before using for the rst time. To charge battery:1. Connect the AC adapter plug to the system connector at the bottom of the device.2. Connect the AC power plug to a grounded wall socket or power strip.NOTE: • The notication LED turns red and charging battery icon appears on the status bar indicating that the battery is charging. • If your battery gets totally discharged, you need to recharge it for at least twenty minutes before you can turn it back on.
19Powering your deviceMake sure that your MarsII is fully-charged before starting the device for the rst time. To turn on power:1. Press and hold the power button.Power buttonStarting up2. Follow onscreen instructions to align screen and set the local time zone.Using the stylusThe stylus is a pen-like device found behind the upper right corner of your MarsII. • Use the stylus to write, draw, select, or drag an item on the screen. • Single-tap an item to select it.• Tap and hold an item to see a menu. Stylus
20Calibrating MarsIICalibrating your device ensures that the item you tap on the screen is activated. This involves tapping in the center of targets that appear in various coordinates on the screen.To calibrate your screen:1. Tap Start > Settings > System tab then tap Screen icon.2. On the General tab tap Align Screen and follow succeeding calibration screen instructions.You can also invoke the calibration screen by simultaneously pressing the Mode and Clear buttons.IMPORTANT NOTE: The gures, screens and information in the following sections and chapters are only for your reference. They may not be exactly the same as what is shown on the screen of your device.
21Tap to open the Start menuTap to setup date, time, and alarm.Displays the current network provider and connection status Tap to set user informationTap to open messagesTap to setup tasksTap to read or make appointmentsTap to sign in Pocket MSNTap to write and send new messageIndicates the battery statusTap to adjust volumeDisplays the signal statusTap to view connectivity statusTap to launch Contacts listTap to change Bluetooth settingsTap to change screen orientationThe Today screenThe Today screen displays information useful to you. You can congure the Today screen to have all the important information you need.• To access the Today screen, tap Start > Today.• To personalize the Today screen, tap Start > Settings > Personal tab > Today.The following describes the common information found on the today screen:
22Status indicatorsRefer to the table below for the Today screen icon status indicators.Icon DescriptionGeneral Packet Radio Services (GPRS) available.Connecting via GPRS.Connected via GPRS.Connecting with ActiveSyncActiveSync connection not active.ActiveSync synchronization in progress.Call forwarded.Call in progress.Call on hold.Missed call.New message.
23Status indicatorsIcon DescriptionNew voice mail.No cellular phone service.No signal.Searching for cellular phone service.Indicates signal strength.Sound OFF.Sound ON.Battery low.Battery partially charged.Battery charging.Battery fully charged.
24Status indicatorsIcon DescriptionSearching Wi-Fi connection.Wi-Fi active.Roaming. This icon appears only if you have international roaming feature. Vibrate or silent mode on. Bluetooth headset connected. Bluetooth head connected with sound. Appears when you set alarmPocket MSN service notication. Pocket MSN chat is online.
25Screen orientationYou can set the screen to three different orientations:1. Portrait2. Landscape (right-handed)3. Landscape (left-handed)Set to Portrait mode to get a better view or better operation of certain applications on your device. Set to Landscape when viewing pictures, video or viewing longer text les.To change the screen orientation, tap Start > Setting > System tab > Screen then select the orientation you want.You can also change the orientation by tapping the icon. Portrait modeLandscape mode
26Start menuThe Start menu contains various programs and applications that you commonly use. Tap Start to display the start menu items:You can also customize the items that appear in the Start menu.To do this:1. Tap Start > Settings > Personal tab > Menus.2. Select the check boxes of the items you want to appear in the Start menu. You can select up to seven (7) items.Portrait mode Landscape mode
27Entering dataChapter• Using the Input Panel• Writing and drawing on the screen• Recording voice• Using ActiveSync™• Synchronizing with Exchange Server• Searching information• Getting Help2
28Using the Input PanelWhen you start an application or select a eld that requires text, symbols, or numbers, the Input Panel icon appears on the menu bar. The Input Panel allows you to select various input methods available on your device including: Block Recognizer, Keyboard, Letter Recognizer, and Transcriber. Using the Block RecognizerThe Block Recognizer allows you to use a single stroke to write letters, numbers, symbols, or punctuations, which are converted into typed text.To use the Block Recognizer:1. In an application, tap the Input Panel arrow, then tap Block Recognizer.2. Write letters, numbers, symbols, or punctuations in the designated writing area.Input panel• Write letters on the abc (left) area of the box.• Write numbers on the 123 (right) area of the box.• Tap the special symbols button to key in symbols, punctuations and other special characters.• Tap Help “?” button for help on how to write characters. Tap for special characters
29Using the on-screen keyboardWith the on-screen keyboard, you can key in text, symbols, numbers, or other special characters when input is possible. To input text using the on-screen keyboard:1. In an application, tap the Input Panel arrow, then tap Keyboard.2. Key in text by tapping keys on the on-screen keyboard.Input panel
30Using the Letter RecognizerWith the Letter Recognizer you can write individual letters, numbers, or special characters, which are converted into typed text.To use the Letter Recognizer:1. In an application, tap the Input Panel arrow, then tap Letter Recognizer.2. Write letters, numbers, symbols, or punctuations in the designated writing area. • Write capital letters on the ABC (left) area of the box. • Write lower case letters on the abc (middle) area of the box. • Write numbers on the 123 (right) area of the box. • Tap the special symbols button to key in symbols, punctuations and other special characters. • Tap Help “?” button for help on how to write characters. Input panelTap for special characters
31Using the TranscriberTranscriber is a handwriting recognition program that allows you to write in cursive, print, or mixed styles. It reliably recognizes not only written text but also numbers and symbols. Make sure to write legibly. See Help for more information on the Transcriber.To use the Transcriber:1. Start an application that accepts user input, such as Notes or Word Mobile.2. Tap the Input Panel arrow, then tap Transcriber.To write using Transcriber (using Notes):1. Tap screen to position the cursor where you want the text to appear.2. Use the stylus to write on the screen. The handwriting will be converted to text after you lift the stylus from the screen.To edit text:1. Draw a line across the text you want to edit. After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted.2. You can now rewrite the text or use the Transcriber gestures to edit your selected text. See Help for the Transcriber gestures.Input panelTap for Help
32Writing and drawing on the screenYou can write or draw directly on the screen and save notes in your own handwriting. If you prefer to use your own handwriting or use drawings in your notes, set the default input mode to Writing. If you prefer text, set the default mode to Typing.To set the default input mode for Notes:1. Tap Start > Programs > Notes.2. From the Notes list, tap Menu > Options.3. In the Default mode: box, tap the down arrow and select any of the following: • Writing - if you want to draw or enter handwritten text in a note. • Typing - if you want to create a typed note.4. Set the other options according to your preference. 5. Tap when nished.To write a note:1. Tap Start > Programs > Notes.2. From the Notes list, tap New.3. Write your text on the screen.4. When nished, tap to return to the Notes list.
33Creat a voice recordingYou can record sound, voice, or add a recording to a note using your device.To create a voice recording using Notes:1. Tap Start > Programs > Notes.2. From the Notes list, tap New.3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar.4. Tap the record icon to begin recording.5. Place the receiver near your mouth or source of sound.6. Tap the stop icon when nished recording. A recording icon appears on the note.7. Tap .To add a recording to a saved note:1. Tap Start > Programs > Notes.2. From the Notes list, tap to open a saved note.3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar. 4. Tap the record icon to begin recording.5. Place the receiver near your mouth or source of sound.6. Tap the stop icon when nished recording. A recording icon appears on the note.7. Tap .
34Using ActiveSync™ActiveSync™ allows you to synchronize data in your device with data in your computer. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, provided that your cellular phone service or company is running Microsoft Exchange Server with Exchange ActiveSync. When synchronized directly with Exchange Server, you can stay up to date even when your PC is turned off.During synchronization, ActiveSync compares the data in your device with the data in your computer or Exchange Server, and updates all data with recent changes. You can select and synchronize data in the following locations using ActiveSync:• Contacts• Calendar• Email• Tasks• Notes• Favorites• Files• MediaYou can also exchange data between your computer and device without synchronizing.ActiveSync is already installed in your device, but before you can synchronize data with your computer, you must rst install ActiveSync in your computer. Install ActiveSync from the Microsoft companion CD that came with your device package.After you have installed ActiveSync, set up a sync relationship between your device and your computer. ActiveSync recognizes your device and automatically transfers the synchronization settings you have in your device.
35If you wish to synchronize your device with Exchange Server through your company or service provider, obtain the name of the Exchange Server, user name, password, and domain name from your network administrator before starting the Sync Setup Wizard.To install and congure ActiveSync in your computer:1. Insert the Microsoft companion CD that came with your device package.2. Follow succeeding screen instructions.3. After the setup is complete, the Sync Setup Wizard automatically starts when you connect your device to your computer. Follow screen instructions to complete the wizard.4. From the Sync Setup Wizard, you can: • Congure an Exchange Server connection to synchronize directly with an Exchange Server. Acquire from your network administrator the required parameters for input. • Create a synchronization relationship between your computer and your device.5. Select the information type that you want to synchronize.6. After you nish the wizard, ActiveSync automatically synchronizes your device. You can disconnect the device after the synchronization is complete. NOTE: • When connected, your device is automatically synchronized with your computer. ActiveSync synchronizes everytime you make a change on either the device or computer. • You cannot use WLAN to synchronize database. • Refer to your Windows® Mobile Help, for more information about ActiveSync synchronization.
36Synchronizing via USBYou can connect to your device using the bundled USB cable to synchronize to your computer.To synchronize your device via USB:1. After installing ActiveSync to your computer, connect the USB plug to the mini-USB connector at the bottom of the device.2. Connect the other end of the USB cable to your computer. Upon connection, ActiveSync automatically synchronizes your device.
37Synchronizing via BluetoothYou can connect your device to your computer using the Bluetooth wireless technology. To synchronize your device via Bluetooth:1. Congure Bluetooth in your computer to support ActiveSync. Refer to the ActiveSync Help in your computer for instructions.2. Turn on Bluetooth in your device. See “Using Bluetooth” section in Chapter 4 for details. 3. On your device, tap Start > Programs > ActiveSync.4. From the ActiveSync screen, tap Menu > Connect via Bluetooth. Make sure your device is within Bluetooth range with your computer. If this is the rst time you connect to this computer via Bluetooth, perform the Bluetooth wizard in your device and setup a Bluetooth partnership between your device and computer. Refer to Chapter 4 for Bluetooth wireless connection settings.Synchronizing via Infrared (IR)You can connect your device to your computer using the built-in Infrared port. To synchronize your device via Infrared (IR):1. Congure ActiveSync in your computer to receive infrared beams. Refer to the ActiveSync Help in your computer for instructions. 2. On your device, tap Start > Programs > ActiveSync.3. From the ActiveSync, tap Menu > Connect via IR. Make sure that the IR port in your device is lined-up and in close range with the IR port of the computer. 4. Tap Sync.
38To synchronize your device with Exchange Server:Synchronizing with Exchange Server1. From the ActiveSync menu, tap Menu > Add Server Source.2. In the Server Address eld, input the name of the server running Exchange Server then tap Next. If necessary, tap the check box This server requires an encrypted (SSL) connection.
394. Tap the check boxes to select the data items that you want to synchronize with Exchange Server. To change the available synchronization settings, select a data item then tap Settings. Tap Finish when done.3. Input your name, password, and domain then tap Next.5. Start the sync process.
40Setting the synchronization scheduleTo set the synchronization with Exchange Server:1. From the ActiveSync screen, tap Menu > Schedule.2. Refer to the table for input details.Volume Recommended setupHigh Select a shorter interval in the Peak times list.Low Select As items arrive option or a longer interval in the Off-peak times list.While roaming Check Use above settings while roaming.Sending messagesTap to check Send outgoing items immediately.
41Searching informationUsing the search tool, you can search for les and other items stored in your device or the external MiniSD card. You can search by le name or by words located in various applications including the Calendar, Contacts, Excel Mobile, Word Mobile, Outlook Mobile, Help, Messages, Notes, and Tasks. You can also lter your search to les larger than 64 KB. To search for a le or an item:1. Tap Start > Programs > Search.2. In Search for, input the le name, word, or other information you want to search. 3. In Type, select the data type to help you lter your search.4. Tap Search. Found items are listed in Results.5. In the Results list, tap the item for which your need information.
42Getting Help You can easily nd Help for using any program on the device.To get help for a program:• From the Today screen or program, tap Start > Help. A page will open with links to topics that explain how to use the program.
43Phone featuresChapter• Using the phone• Making a call• Receiving a call3
44Using phoneLike a standard cellular phone, you can use your MarsII to make and receive calls. You can also keep a history of calls made and received, send SMS or MMS messages, take notes while talking, call from Contacts, and copy SIM card contacts to your device.Phone padThe phone pad allows you to easily dial and access the Contacts, Call History, Speed Dial, and Phone settings. To launch the Phone pad, do any of the following:• Tap Start > Phone.• Press the talk button.• Directly dial the phone number you want to call using the numeric key pad.• From the Today screen, press the left soft key.
45Adjusting the device volumeTo adjust the device volume:1. Tap the speaker icon.2. From the volume menu, you can: • Adjust the phone volume or device volume by moving the slider to the desired volume level. • Tap On, Vibrate, or Off to change the system and ringer volume settings.You can also adjust the device volume by pressing the volume controller keys at the left side of the device.Volume controller
46You can make a phone call using either the key pad or phone pad. You can also make calls directly from the Contacts, Call History, Speed Dial, or Voice Commander.Using the keypadTo make a call using the keypad:1. Enter the number of the party you wish to call, then press .2. Talk to the called party when connected.3. When nished, press to end the call.Using the phone padTo make a call using the phone pad:1. Tap Start > Phone.2. From the phone screen, tap the number of the party you want to call then tap . If you tap the wrong number, tap the back arrow to erase number to the left. 3. Talk to the called party when connected.4. When nished, tap to end the call.Making a callBack arrowTalk button
47Dialled numbers appear herePhone pad featuresPress to display the call historyPress to set speed dialPress to use video callPress to make callPress to launch menuPress to launch Contacts listNumeric keypadPress to use video callPress to end callPress to launch menuDisplays the current call statusPress to mutePress to launch Contacts listPress to launch numeric keypadPress to turn speaker ON/OFFPress to take notes
48Making calls from ContactsTo make a call directly from Contacts:1. Tap Start > Phone.2. From the Phone pad, tap Contacts or press the Left soft key. You can also launch Contacts from the Today screen by tapping Contacts on the menu bar or pressing the Right soft key.3. You can do any of the following to make a call: • Tap to select a contact, then from the Contacts list, tap Call. • Tap to select a contact, then press talk button. • Select a contact then press the talk button twice. Once to send the number to the Phone pad, and once to dial the number. • You can also tap and hold the contact, and on the shortcut menu tap Call.Making calls from Call History• To make a call from the call history:1. Tap Start > Phone.2. On the Phone pad, tap the Call History button.3. Scroll to the desired contact or phone number, and tap Call. To look for more numbers in other categories, tap Menu > Filter and tap a category.• You can also launch Call History in the Today screen by pressing the left soft key.Call History button
49Using the Speed DialWith Speed Dial you can call frequently dialled numbers in a single tap. For example, if you assign a contact to the number 2 button in Speed Dial, you can simply tap and hold on the Phone pad to dial the contact’s number. To create a Speed Dial entry:1. Make sure that entry you want to create is already in the Contacts.2. Tap Start > Phone.2. On the Phone pad, tap the Speed Dial button.3. Tap Menu > New.4. Tap a contact from the list then tap Select.5. In the Location box, select an available location for the new speed dial then tap OK.To create a Speed Dial entry from Contacts:1. From the Contacts list, tap and hold a contact name.2. On the shortcut menu, tap Add to Speed Dial.3. Select an available location for the new Speed Dial.To delete a Speed Dial entry:• In the Speed Dial list, tap and hold the desired entry and tap Delete.
50When you receive a call, a message will appear, giving you the option to answer or ignore the incoming call.To answer or reject an incoming call:• To answer a call tap Answer, or press .• To reject an incoming call, tap Ignore, or press .TIP: Long press to switch receiver to speakerphone mode..Receiving a callTo terminate a call:• Tap End or press on the device to terminate an incoming or outgoing call in progress.The following pop-up screen appears during an incoming call:• Tap Answer to receive call or• Tap Ignore to dismiss call.
51Wireless featuresChapter• Using Bluetooth®• Using WLAN (IEEE 802.11b) • Using Infrared (IR)• Setting a GPRS connection4
52OverviewBluetooth® is a short-range wireless communications technology that allows devices with Bluetooth capabilities to exchange data within a radius of about 10 meters (30 feet) without requring a physical connection.With Bluetooth enabled in your device, you can:• Connect and communicate (i.e. beam les, tasks, contacts) with other devices with Bluetooth features.• Use Bluetooth service. After you connect to another device or computer using Bluetooth, you can use the services available on that device.Activating Bluetooth in your deviceTo activate (turn ON) Bluetooth in your device:1. Tap Start > Settings > Connections tab then tap the Bluetooth icon. 2. From the Bluetooth screen, tap General tab. 3. Tap Turn on button. The Bluetooth status is displayed above the Turn on/Turn off buttons.You can also turn Bluetooth On or Off from the Today screen. To do this:1. Find the Bluetooth icon at the botton right corner of the Today screen.2. Tap to display shortcut menu then tap Turn Bluetooth ON. The Bluetooth icon changes to if Bluetooth is turned Off. Using Bluetooth®
53Conguring Bluetooth To congure Bluetooth in your device:1. Start > Settings > Connections tab then tap the Bluetooth icon. 2. From the Bluetooth screen, you can access the following tabs: • General - allows you to set the user prole, turn Bluetooth on or off, displays the Bluetooth status, and provides a link to the Bluetooth Manager. • Accessibility - allows you to set the device name, see the Bluetooth Device Address, select remote device you want to connect, and set whether to allow remote devices to detect your device. • Services - enable or disable available Bluetooth services, require authorization, set authentication passkey, and set to require encryption. You can also access advanced settings from this tab. The available service settings are enabled when you select a Bluetooth service. Select a service from the list to establish its settings.Bluetooth Service DescriptionFile Transfer Set the highest level directory on your device that remote devices can access.Information Exchange Sets the default business card.Serial Port Displays the port addresses. This cannot be changed.Personal Network Server Allows you to customise the service settings for your personal network server.Hands Free Enable telephone and/or audio prole.Dial-up Networking Server Allows you to enable or authenticate, or both, the connections to the dial-up network server.NOTES: The Bluetooth device setup instructions provided in this section may differ with other Bluetooth devices. If the instructions in this guide differs from the documentation that came with your Bluetooth-enabled device, follow the latter.
54Using a Bluetooth-enabled headsetMono headset setup1. Make sure that Bluetooth is enabled on your device.2. Tap on the Today screen then on the shortcut menu tap Bluetooth Manager.3. From the Bluetooth Manager, tap New.4. From the Bluetooth Connection Wizard, tap Hands-free/Headset setup then tap Next.
55NOTES: If the connection between the device and a Bluetooth headset fails, press the device icon then choose “Re-connection”, you do not have to pair the devices again7. In Passkey, input the alphanumeric passkey of your headset device then tap . You can nd this in the documentation that came with your headset device.8. Tap Finish. You are now ready to use your headset device.5. Make sure that your headset device is in pairing mode and ready to receive incoming connection requests then tap Next.6. Tap the name of your Bluetooth-enabled headset device then tap Next.
56Stereo headset setupMarsII supports A2DP (Advanced Audio Distribution Prole), which is used by Bluetooth-enabled stereo headsets. Make sure that your stereo headset also supports A2DP. 1. Tap on the Today screen then on the shortcut menu tap Bluetooth Manager.2. From the Bluetooth manager screen, tap New then select High Quality Audio Setup.3. Make sure that your stereo headset device is in pairing mode and ready to receive incoming connection requests then tap Next.4. Tap the name of your stereo headset device then tap Next. • If you want to create a shortcut, tap the check box Create a shortcut for this connection then input a connection name. • If you want to use a secure connections, tap the check box to Use a secure, encrypted connection.
57NOTES: • To answer a phone call using your stereo headset, make sure that you have mono and stereo connection at the same time. • To use voice commander while using a headset, press the answer button on the headset then follow given instructions.5. Tap Finish to initiate connection. Using a Bluetooth-enabled GPSTo congure a Bluetooth-enabled GPS device:3. From the Bluetooth Manager, tap New.4. Make sure that your GPS device is in pairing mode and ready to receive incoming connection requests.5. From the Connection Wizard, tap Explore a Bluetooth device then tap Next.1. Make sure that Bluetooth is enable on your device.2. Tap on the Today screen then on the shortcut menu tap Bluetooth Manager.
586. Tap the name of your Bluetooth-enabled GPS device then tap Next.7. Select SPP Slave in the Service Selection list then tap Next.8. Tap Finish.9. Tap and hold the shortcut icon to display shortcut menu then tap Connect.10.In Passkey, input the alphanumeric passkey of your headset device then tap OK. You can nd this in the documentation that came with your headset device.
59IntroductionWLAN (IEEE 802.11b), refers to certain types of wireless local area network (WLAN) that use specications in the 802.11 family. Created by the Wi-Fi Alliance, a nonprot international association to certify interoperability of wireless local area network products. Any device tested and approved by the Wi-Fi Alliance are certied as interoperable with each other even if they are from different manufacturers.Activating WLAN in your deviceTo activate WLAN in your device:1. Tap Start > Settings > Connections tab then tap the Wi-Fi Manager icon. 2. From the Wi-Fi Manager screen, tap Menu then Turn Wi-Fi On. Using WLAN (IEEE 802.11b)NOTE: • We recommend not to use WLAN and the Bluetooth function at the same time. Disturbance in data transmission is possible since both use the same wireless channel. • The WLAN and USB connections can not be used at the same time. • When the battery power is less than 20% the device prompts a warning message whether to continue using WiFi or not. Tap “Yes” to continue using or “No” to disconnect. In any case, we recommend that you plug the power adapter immediately to avoid losing data.
60Conguring WLAN To congure WLAN in your device:1. Start > Settings > Connections tab then tap the Wi-Fi Manager icon. 2. From the Wi-Fi Manager screen, you can access the following tabs: • Wi-Fi Status • Setting • IP Info • Site SurveyNOTE: Tap ? for Wi-Fi Help.Wi-Fi Status Displays the Wi-Fi status, ESSID, BSSID, BSS mode, channel, data rate, IP Address, and signal strength.Setting Allows you to set the Adhoc channel, preamble, data rate, enable or disable power save feature, set power strength, and enable or disable auto power off feature.NOTE: The Power Save feature reduces data transmission rate but improves the battery life.
61IP Info Displays the network information and allows you to renew or ping a network connection. Site Survey Shows the available wireless networks in the area.
62You can use your device to connect to another device with infrared capabilities. To connect to another device via infrared:1. Setup the device you want to connect to receive infrared beams. Refer to the technical documentation that came with the device.2. Congure your device to receive infrared beams. Tap Start > Settings > Connections tab then tap Beam icon.3. Tap to check Receive all incoming beams.4. Tap .5. Line up the infrared ports of both devices. Make sure that they are unobstructed and within range.6. Send data from the source device. Upon connection, your device prompts that data is being received. Tap Cancel if you want to stop transfer.7. When nished, tap Yes to accept and save data or tap No to discard data.Using Infrared (IR)
63Your MarsII allows you to connect via General Packet Radio Service (GPRS). GPRS is a wireless communication standard that runs at speeds of up to 115 kbps, compared to 9.6 kbps of the current Global System for Mobile Communications (GSM). It supports a wide range of bandwidths that allows sending and receiving small bursts of data, such as email and web browsing. To set a GPRS connection in your device:Setting a GPRS connection1. From the Start manual, tap Settings.2. From the Settings screen, select the Connections tab then tap Connections icon.
644. From the Connections screen, tap Add a new model connection.5. Input a unique name for the connection then select Cellular Line (GPRS) from the modem list.
656. Input the Access point name.7. Input your user name, password, and domain then tap Finish. Contact your network administrator for assistance. NOTE: The GPRS and USB connections can not be used at the same time.
66Connecting GPRSTo connect GPRS:1. Tap Start > Settings > Connections tab then tap Connections icon.2. From the Connections screen, tap Manage existing connections.3. Tap and hold on an existing connection then from the pop-up menu tap Connect. Tap Delete if you want to delete selected connection setting.4. When connected, tap to exit.
67To disconnect GPRS:1. From the pop-up callout, tap Disconnect.2. Tap to exit. If you have set a default GPRS connection, it automatically connects when you launch an application that connects to the Internet.1. Launch any application that connects to the Internet (e.g. Internet Explorer). The device will automatically connect your default GPRS connection. A pop-up callout appears to display the connection status.2. When connected, you can start browsing the Internet. If you’re using Internet Explorer, the default site will be displayed.Pop-up calloutNOTE: • If your ActiveSync is set to sync with Exchange Server automatically, synchronization will occur after you connect again. • GPRS will automatically reconnect everytime you launch an application that requires GPRS connection (e.g. Internet Explorer, Pocket MSN).
68
69Multimedia featuresChapter• Using the camera• Viewing pictures and video6
70The built-in two-megapixel camera allows you to take photos and record audio/video clips. Launching the cameraTo start using the camera:• Tap Start > Programs > Pictures and Videos > Camera icon or • Press the Camera button on the left side of your device.Using the cameraCamera buttonTo exit the Camera:• Tap the exit icon.NOTE: • By default, the preview screen is set to landscape. • After launching the camera, your device is set to camera mode by default. • In camera mode, the camera button function as shutter button.
71Joystick functions in camera modeThe following describes the 5-way joystick functions in Camera mode:Up In camera preview mode, press for video mode.In the camera or video option menu, press to select menu items.Down In video preview mode, press for camera mode.In the video or camera options menu, press to select menu items.Backward In camera mode and if the resolution is not 1600x1200, press to zoom in. Forward In camera mode and if the resolution is not 1600x1200, press to zoom out.Enter/Action button Press to take picture or start recording video. Press again to stop recording.Press to execute a selected menu item or to display more menu items.DownBackwardEnter/Action ButtonForwardUp
72Available capture modesYour device camera can be set to two capture modes:• Camera mode - Camera mode allows you to take photos, and save them to your device or MiniSD. You can also congure the camera to match an environment, set picture size, select magnication, adjust the picture quality, apply effects, and modify other advanced settings.• Video mode - Video mode enables you to record audio/video clips. Like in camera mode, it also allows you to select the magnication, set the video size, enable macro mode, apply some effects, select target storage, and modify advanced video settings. Supported formatsUsing the camera mode or video mode, the images or video clip captured are stored in the following formats:• Still image (Camera mode) - JPEG (.jpg)• Video (Video mode) - 3GP (.3gp), MPEG-4 (.mp4)
73Camera mode screenThe following describes the screen icons in Camera mode:Capture mode iconPicture quality iconFlash light statusDefault storage iconScene mode iconTimer iconBurst mode statusEffects iconPicture resolutionTap to close cameraTap to zoom inTap to zoom outTap to launch camera menuNumber of available shotsCapture modes:Camera modeVideo modeTap to launch Pictures and Videos
74Camera mode icons• Capture mode icon [ / ] - indicates the current capture mode. • Picture quality icon [ / / ]- indicates the picture quality used.• Flash light status icon [ / / ] - indicates the camera ash status.• Default storage icon [ / ] - indicates default storage for captured images and videos clips.• Scene mode icon [ / / ] - indicates the scene mode used.• Timer icon [ / ] - when the camera timer is enabled (5 seconds or 10 seconds), the corresponding timer icon appears. When you press the shutter button or the joystick to take a picture, the count down begins and picture is taken after the time set.• Burst mode icon [ / ] - indicates the number of frames in burst mode.• Effects icon [ / / / ] - indicates the effects used. • Picture resolution [ / / / / / ] - shows the resolution used. When set to 1600x1200 resolution, the zoom in/zoom out function is disabled.• Exit icon [ ] - tap to exit camera.• Zoom In [ ] - tap to zoom in view of subject on screen.• Zoom Out [ ] - tap to zoom out view of subject on screen.• Thumbnails [ ]- tap to launch Pictures and Video application and preview your images in thumbnails.• Menu [ ] - tap to launch camera menu options.• Delete [ ] - tap to delete picture.• Remaining shots information - shows the remaining, available shots of pictures based on the current settings.
75Camera options menuThe camera options menu allows you to change various camera and picture settings.To launch options menu:1. Tap Menu icon from the camera screen.2. From the shortcut menu, tap an icon to display contents.Camera options shortcut menuNOTE: The screens in this section may not be exactly the same as what are displayed on your screen and they are only for your reference.
76Change ModeThe Change Mode option allows you to set capture mode into Camera or Video mode.SceneThe Scene option allows you to select presets appropriate for a night scene or sports event. Select Auto to use best setting for any scene.Picture SizeAllows you to set the frame size of picture.
77Picture QualityThis option provides three picture quality presets: Normal, Fine, and Super Fine. The picture quality is set to Super Fine by default.Flash ModeThis option allows you to change the ash mode to suit a variety of lighting situations. ZoomAllows you to change the maximum magnication allowed.
78Self-TimerSets the delay of shutter release to 5 or 10 seconds after you have pressed the camera/shutter button..BurstAllows you to take 4 or 9 pictures in succession by pressing the camera/shutter button only once.FrameAllows you to set a frame.
79EffectThe Effect option allows you to apply some effects to the subject. Select from the following conguration options: Black-White, Negative, and Sepia. Set to Normal for no effect.Save toAllows you to select the default storage for captured pictures. NOTE: Prepare a MiniSD card before setting default storage to Storage Card.
80AdvancedThis option allows you to set the following:- Filename prex format- Filename prex- File number- Date and time stamp- Shutter sound- Burst interval
81Taking photosAfter launching the camera, your device is set to Camera mode by default. If set otherwise, tap Menu > Change Mode > Camera Mode then tap Done. You can also set to camera mode by tapping the camera mode icon on the screen.To take a photo:1. Aim device to your subject then half-press camera/shutter button to auto-focus on subject. While camera/shutter button is half-pressed, you can see the auto-focus frame on the center of the screen. The frame turns green indicating the auto-focus is nished.IMPORTANT: The auto-focus range is effective only at 8~80 cm, if you want to skip this feature, press the joystick action button to take a picture. 2. Full-press the camera/shutter button or press the joystick action button to capture image.3. Tap Camera or press the joystick action button again to go back to camera screen.4. Repeat steps 1 to 3 to take more photos.NOTE: The image is automatically saved to the default storage location and can be previewed using the Pictures and Videos application.Camera mode iconAuto-focus frame
82Other optionsTap Menu to access the following options:• Save to Contact• Send via MMS• Send via e-mailSave to ContactTo save to contacts:1. Tap Menu then tap Save to contact.2. From the Contact screen, select contact where you want the image saved then tap Select.
83Send via MMSTo send image via MMS:1. Tap Menu then tap Send via MMS.2. Key in recipient or tap To to display contact list.3. Key in subject.4. Tap Send. Send via EmailTo send image via electronic mail:1. Tap Menu then tap Send via E-mail.2. Key in recipient or tap To to display contact list.3. Key in subject.4. Key in message.5. Tap Send.
84Delete imageTo delete image:1. Tap Delete icon.2. Tap OK from the conrmation message.
85Video mode screenThe following describes the screen icons in Video mode:Capture mode iconRemaining video recording time Default storage icon Video resolutionTap to close cameraTap to zoom inTap to zoom outTap to launch Pictures and VideosCapture mode icons:Camera modeVideo modeTap to launch video menuRecording indicator Green: Ready Red: Recording
86Video mode icons• Capture mode icon [ / ] - indicates the current capture mode. • Flash light status icon [ ] - this icon appears when the ash light is enabled.• Default storage icon [ / ] - indicates default storage for captured video clips.• Effects icon [ / / / ] - indicates the effects used. • Picture resolution [ / / ] - shows the resolution used.• Exit icon [ ] - tap to exit video.• Zoom In [ ] - tap to zoom in view of subject on screen.• Zoom Out [ ] - tap to zoom out view of subject on screen.• Thumbnails [ ]- tap to launch Pictures and Video application and play your video.• Menu [ ] - tap to launch video menu options.• Delete [ ] - tap to delete video.• Remaining video recording time information - shows the remaining, video recording time based on the current settings.
87Video options menuThe video options menu allows you to change various video and playback settings.To launch video options menu:1. Tap Menu from the video screen.2. From the shortcut menu, tap an icon to display contents.Video options shortcut menuNOTE: The screens in this section may not be exactly the same as what are displayed on your screen and they are only for your reference.
88Change ModeThe Change Mode option allows you to set your device into Camera or Video capture mode.ZoomAllows you to change the maximum magnication allowed.Video SizeAllows you to set the frame size of video.
89Flash ModeThis option allows you to change the ash mode to suit a variety of lighting situations. Save toAllows you to select the default storage location for captured pictures. NOTE: Prepare a MiniSD card before setting default storage to Storage Card.
90EffectThe Effect option allows you to apply some effects to the subject. Select from the following conguration options: Black-White, Negative, and Sepia. Set to Normal for no effect.AdvancedThis option allows you to set the following:- Video letype- Filename prex format- Filename prex- File number- Enable or disable audio when recordingTap to display more options
91Recording videosSet the device to video capture mode to record videos. To set video mode:To record video:1. Aim device to your subject then half-press camera/shutter button to auto-focus on subject. While camera/shutter button is half-pressed, the auto-focus frame appears on the center of the screen.Video mode icon• Tap Menu > Change Mode > Video Mode then tap Done.• You can also set the video mode by tapping the video mode icon on the screen as shown.Auto-focus frame
922. Full-press the camera/shutter button to begin recording. The record indicator turns from green to red while video is recording.3. Full-press the camera/shutter button again to stop recording.NOTE: • The video clip is automatically saved to the default storage location. • Use Windows Media Player Mobile to playback video clip in your device. • Use Apple® QuickTime™ player, if you wish to play video clips in your computer. You can download QuickTime™ installer from www.apple.com/quicktime. 4. Tap Camera to go back to camera screen.5. Repeat steps 1 to 4 to record another video.Record indicator
93Send via MMSTo send video via MMS:1. Tap Menu then tap Send via MMS.2. Key in recipient or tap To to display contact list.3. Key in subject.4. Tap Send. Other optionsTap Menu to access the following options:• Send via MMS• Send via E-mail• Play
94Send via EmailTo send video via electronic mail:1. Tap Menu then tap Send via E-mail.2. Key in recipient or tap To to display contact list.3. Key in subject.4. Key in message.5. Tap Send. PlayTo play video:1. Tap Menu then tap Play.2. Tap to exit.
95DeleteTo delete video:1. Tap Delete icon.2. Tap OK from the conrmation message.
96Use the Pictures and Video Application to preview stored images and playback video clips.Viewing pictures and videoTo view pictures and video:1. Tap Start > Programs > Pictures and Videos. 2. Tap the picture or video clip you want to see. • To view pictures or launch video clips stored in MiniSD card, tap the folder list (labeled My Pictures), and tap MiniSD Card. • To view pictures stored in My Pictures folder on your device, tap My Pictures then tap picture thumbnail. • To playback video clips in My Videos folder on your device, tap My Videos then tap video thumbnail. Viewing pictures and video
97Device components StatusChapter 7
98The System Information contains important device information including the current device settings and version.To launch the System Information:1. Tap Start > Settings > System > System Information icon.2. Tap the Device Info tab for device hardware information.3. Tap Version tab to display the ROM, Boot, Radio, MP and Battery version.Device Info VersionSystem information
99CPU mode settingAllows you to select the CPU mode (Turbo, Standard, Power Saving). To launch the CPU mode setting:Tap Start > Settings > System > CPU Mode icon.Tap to check Automatic Mode to automatically change the CPU speed according to the CPU loading.USB settingAllows you to set the USB connection mode.To launch the USB setting:Tap Start > Settings > Connections > USB settings icon.
100LCD BrightnessAdjusts the LCD brightness on battery power and external power.To launch the LCD Brightness setting:Tap Start > Settings > System > Brightness icon.PowerDisplays the battery power status. To launch the Power setting:Tap Start > Settings > System > Power icon.
101MemoryDisplays the total, in use and free memory.To launch the Memory setting:Tap Start > Settings > System > Memory icon.Storage card memoryDisplays the total, in use, and available storage card memory.To launch it:Tap Start > Settings > System > Memory > Storage Card tab.
102Programs running in memoryAllows you to activate or stop any program running on memory.To launch it:Tap Start > Settings > System > Memory > Running Programs tab.SettingsAllows you to select the items to display in the pop-up menu.To launch it:Tap Start > Settings > Personal > Menus icon.IMPORTANT: When you exit a running program, you are actually only minimizing it and the program remains in the memory. You can stop these programs from running in the background using this option.
103Appendix• Notices• Contact information
104Replaceable batteriesIf an equipment is provided with a replaceable battery and if replacement by an incorrect type could result in an explosion (e.g. with some lithium batteries), the following applies:– if the battery is placed in an OPERATOR ACCESS AREA, there shall be a marking close to the battery or a statement in both the operating and the servicing instructions;– if the battery is placed elsewhere in the equipment, there shall be a marking close to the battery or a statement in the servicing instructions.The marking or statement shall include the following or similar text:CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING THE INSTRUCTIONSNotices
105Operator access with a toolIf a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.An acceptable marking for an electric shock hazard is (ISO 3864, No. 5036).Equipment for restricted access locationsFor equipment intended only for installation in a RESTRICTED ACCESS LOCATION, the installation instructions shall contain a statement to this effect.
106WARNINGThe user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. For FCCPCS Head: 0.369 mW/gPCS Body: 1.01 mW/gWLAN Body: 0.00203 mW/g For DGT & CE GSM Head: 0.166 mW/gDCS Head: 0.223 mW/gWCDMA Head: 0.215 mW/g
107Declaration
108Contact information
FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. P*PTests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the device as reported to the FCC when tested for use at the ear is 0.369 W/kg for PCS Head SAR and when worn on the body, as described in this user guide, is 1.01 W/kg for PCS Body SAR and 0.00203 W/kg for WLAN Body SAR. (Body-wornmeasurements differ among device models, depending upon available enhancementsand FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of HTUhttp://www.fcc.gov/oet/fccidUTH after searching on FCC ID: MSQO2Z1. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on.

Navigation menu