ASUSTeK Computer P00A ASUS Tablet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2942767
Application ID	9QjVQqOhW7Ip5r93p9ZB3g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	126.54kB (1581798 bits)
Date Submitted	2016-03-28 00:00:00
Date Available	2016-09-25 00:00:00
Creation Date	2016-03-21 15:38:50
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2016-03-22 10:49:23
Document Title	User manual
Document Creator	Adobe InDesign CS6 (Windows)

Charging your device
ASUS Tablet
Your ASUS Tablet
Ensure to fully charge your ASUS Tablet before using it in battery
mode for extended periods. Remember that the power adapter
charges your ASUS Tablet as long as it is plugged into an AC
power source. Be aware that it takes much longer to charge the
ASUS Tablet when it is in use.
Micro USB 2.0 port
Speaker/Headset port
Rear camera
Turn off your ASUS Tablet and remove the back cover before
inserting the microSD card to the slot. Close the back cover
before you turn on the device.
• Peel the protective film off from the power adapter and micro
USB cable before charging the ASUS Tablet to prevent risk or
injury.
Safety precautions
• Ensure that you plug the power adapter to the correct power
outlet with the correct input rating. The output voltage of this
adapter is DC 5.2 V, 1 A.
• When using your ASUS Tablet while plugged-in to a power
outlet, the grounded power outlet must be near the unit and
easily accessible.
Microphone
Replacing the back cover
Contact your airline provider to learn about related in-flight
services that can be used and restrictions that must be followed
when using your ASUS Tablet in-flight.
1. Insert the clips on your back
cover into the grooves on your
ASUS Tablet.
2. Press down the back cover on all
sides to secure it in place.
Audio speakers
This ASUS Tablet should only be used in environments with
ambient temperatures between 0°C to 35°C (32°F to 95°F).
Ambient light sensor
Long time exposure to extremely high or low temperature
may quickly deplete and shorten the battery life. To ensure the
battery’s optimal performance, ensure that it is exposed within
the recommended environment temperature.
Touch screen panel
IMPORTANT!
• Use only the bundled power adapter and micro USB cable to
charge your ASUS Tablet. Using a different power adapter may
damage your ASUS Tablet.
Groove
IMPORTANT! You can send your ASUS Tablet through x-ray
machines (used on items placed on conveyor belts), but do not
expose them to magnetic detectors and wands.
First Edition / March 2016
Locate the groove on the
bottom-right corner and pull the
back cover outwards until it is
removed completely.
Charging your ASUS Tablet
Power button
Airplane precautions
E11170
Installing a microSD card
Volume button
IMPORTANT! Do not leave the ASUS Tablet connected to the
power supply once it is fully charged. ASUS Tablet is not designed
to be left connected to the power supply for extended periods of
time.
User Guide
Removing the back cover
• Do not use or expose your ASUS Tablet near liquids, rain, or
moisture.
NOTE: The memory card slot supports microSD, microSDHC, and
microSDXC card formats.
• Do not use your ASUS Tablet near heating equipment or in
places where there is likelihood of high temperature.
To charge your ASUS Tablet:
Connect the micro USB cable to the power adapter.
Plug the power adapter into a grounded power outlet.
Plug the micro USB connector into your ASUS Tablet.
Front camera
Charge your ASUS Tablet for eight (8) hours before
using it in battery mode for the first time.
• Keep your ASUS Tablet away from sharp objects.
• Do not place objects on top of your ASUS Tablet.
NOTE:
• Your ASUS Tablet can be charged via the USB port on the
computer only when it is in sleep mode (screen off) or turned
off.
• Charging through the USB port of a computer may take longer
time to complete.
• If your computer does not provide enough power for charging
your ASUS Tablet, charge your ASUS Tablet via the grounded
power outlet instead.
Appendices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment causes harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by doing one or more of the following measures:
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed
and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions
accepted by the FCC with the EUT transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC is 1.03 W/kg when placed next to the body.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC
and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
MSQP00A.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS standard(s).
•
Reorient or relocate the receiving antenna.
This Class B digital apparatus complies with Canadian ICES-003 and CAN ICES-3(B)/NMB-3(B).
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device. The IC ID for this device is 3568A-P00A.
•
Consult the dealer or an experienced radio/TV technician for help.
connected.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
For FCC and IC e-labelling information, please go to Settings > About > Regulatory information.
Label Location Declaration
We state that the label of FCC ID: MSQP00A will be put under the back cover and it is visible to the users as
they install the SD card.
For FCC and IC e-labelling information, please go to Settings > About > Regulatory information.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized. This device has been evaluated for and shown compliant
with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in
portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Canada, avis d’Industrie Canada (IC)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence.
Caution
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et CAN ICES-3(B)/
NMB-3(B).
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall comply with the e.i.r.p. limit; and
Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer
d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuvent affecter son fonctionnement. L’identifiant IC de cet appareil est 3568A-P00A.
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the
e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Pour les informations d’étiquette électrique de FCC et IC, s’il vous plaît aller à Paramètres > À propos >
infos réglementaires.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d’exposition aux fréquences
radio d’Industrie Canada (IC). Utilisez l’appareil sans fil de façon à minimiser les contacts humains lors du
fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption Rate – Taux
d’absorption spécifique) d’IC lorsqu’il est installé dans des produits hôtes particuliers qui fonctionnent
dans des conditions d’exposition à des appareils portables.
Ce périphérique est homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant à
l’appareil dans la liste d’équipement radio (REL - Radio Equipment List) d’Industrie Canada rendez-vous
sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
ZenTalk Fans Forum
www.asus.com/zentalk/global_forward.php
www.asus.com/support/
IC Warning Statement
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products
marketed in the US/ Canada.
15060-73800000
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction
de sélection de l’indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au
Canada.
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated. 
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or
damage to LE-LAN devices.
Avertissement
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une
utilisation a l’interieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites
mobiles utilisant les memes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725
MHz doit se conformer a la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se
conformer a la limite de p.i.r.e. specifiee pour l’exploitation point a point et non point a point, selon le cas.
(iv) les pires angles d’inclinaison necessaires pour rester conforme a l’exigence de la p.i.r.e. applicable au
masque d’elevation, et enoncee a la section 6.2.2 3), doivent etre clairement indiques. 
(v) De plus, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont
designes utilisateurs principaux (c.-a-d., qu’ils ont la priorite) pour les bandes 5250-5350 MHz et 56505850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
EC Declaration of Conformity
This product is compliant with the regulations of the R&TTE Directive 1999/5/EC. The Declaration of
Conformity can be downloaded from https://www.asus.com/support/.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers,
and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
For France, headphones/earphones for this device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-1:2013 and/or EN 50332-2:2013 standard required by
French Article L.5232-1.
ENERGY STAR complied product
All ASUS slate computers with the ENERGY STAR logo comply with the ENERGY STAR standard, and the
power management feature is enabled by default. The display will be automatically set to sleep within
10 minutes user inactivity. Users could wake your computer through click the display, or press the power
button.
Please visit http://www.energystar.gov/powermanagement for detail information on power management
and its benefits to the environment. In addition, please visit http://www.energystar.gov for detail
information on the ENERGY STAR joint program.
Regional notice for Turkey
AEEE Yönetmeliğine Uygundur.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientific organizations through
regular and thorough evaluations of scientific studies. The unit of measurement for the European Council’s
recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is 2.0 W/
Kg averaged over 10 gram of body tissue. It meets the requirements of the International Commission on
Non-Ionizing Radiation Protection (ICNIRP).
Rechargeable Battery Recycling Service in North America
For US and Canada customers, you can call 1-800-822-8837 (toll-free) for recycling
information of your ASUS products’ rechargeable batteries.
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and
the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a separation of 0
cm to the body while transmitting at the highest certified output power level in all frequency bands of
the mobile device.
Green ASUS notice
ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’
health while minimizing the impact on the environment. The reduction of the number of the manual
pages complies with the reduction of carbon emission.
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use
of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl
ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by
weight in homogenous materials for cadmium, except for the exemptions listed in Schedule-II of the Rule.
CE Mark Warning
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and protect the environment through
energy efficient products and practices.
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and recognition of
conformity.
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power
cords greater than or equal to: H05VV-F, 3G, 0.75 mm2 or H05VV-F, 2G, 0.75 mm2.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly recycle
our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.
com/english/Takeback.htm for detailed recycling information in different regions.
Coating notice
The highest CE SAR value for the device is 0.479 W/Kg.
This equipment may be operated in:
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is
applied to insulate the device except on the areas where the I/O ports are located.
AT
BE
BG
CH
CY
CZ
DE
DK
EE
ES
FI
FR
GB
GR
HU
IE
IT
IS
LI
LT
LU
LV
MT
NL
NO
PL
PT
RO
SE
SI
SK
TR
Regional notice for California
WARNING! This product may contain chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Wash hands after handling.
Copyright Information
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translate into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS and ASUS Tablet logo are trademarks of ASUSTek Computer Inc.
Information in this document is subject to change without notice.
Copyright © 2016 ASUSTeK COMPUTER INC. All Rights Reserved.
ASUSTeK COMPUTER INC.
Address:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
declare the following apparatus:
Product name :
ASUS Tablet
Model name :
P00A
EMC – Directive 2004/108/EC (until April 19th, 2016) and Directive 2014/30/EU (from April 20th, 2016)
EN 55022:2010 +AC:2011, Class B
EN 61000-3-2:2014, Class A
EN 55013:2001+A1:2003+A2:2006
EN 300 328 V1.9.1(2015-02)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1(2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2014-02)
EN 301 893 V1.8.1(2015-03)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001/A1:2012
EN 62479:2010
EN 62311:2008
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:2002 / A12: 2011
Ecodesign – Directive 2009/125/EC
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
DO NOT throw the ASUS Tablet in fire. DO NOT short circuit the contacts. DO NOT
disassemble the ASUS Tablet.
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-4 V2.1.1(2013-12)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-2 V1.1.1(2005-07)
EN 302 623 V1.1.1(2009-01)
EN 50566:2013/AC:2014
EN 50385:2002
LVD – Directive 2006/95/EC (until April 19th, 2016) and Directive 2014/35/EU (from April 20th, 2016)
Model name:  P00A
Regulation (EC) No. 278/2009
Regulation (EU) No. 617/2013
RoHS – Directive 2011/65/EU
CE marking
Equipment Class 2
DO NOT throw the battery in municipal waste. The symbol of the crossed out
wheeled bin indicates that the battery should not be placed in municipal waste.
DO NOT throw the ASUS Tablet in municipal waste. This product has been designed
to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled
bin indicates that the product (electrical, electronic equipment and mercurycontaining button cell battery) should not be placed in municipal waste. Check local
regulations for disposal of electronic products.
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
R&TTE – Directive 1999/5/EC
Proper disposal
batterie de type incorrect. La batterie doit être recyclée de façon appropriée.
Manufacturer:
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
For the detailed user manual and related information, refer to the user manual included in the ASUS
Fonepad or visit the ASUS Support Site at https://www.asus.com/support/.
La batterie présente un risque d’incendie si celle-ci est remplacée par une
EU Declaration of Conformity
We, the undersigned,
Manufacturer
Address, City
Authorized
Representative
in Europe
Address, City
Country
ASUSTek COMPUTER INC.
4F, No. 150, LI-TE RD., PEITOU,
TAIPEI 112, TAIWAN
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Ver. 160217
(EU conformity marking)
Signature
Taipei, Taiwan
Place of issue
Jerry Shen
13/4/2016
Printed Name
Date of issue
CEO
2016
Position
Year CE marking was first affixed

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Instance ID                     : uuid:3687c065-1975-40d8-b0dd-5e83e09aea2e
Original Document ID            : adobe:docid:indd:c000abc0-6409-11e3-b0f5-e6957f81696a
Document ID                     : xmp.id:25C101DD37EFE511A5A0E769BA3AE082
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7198438737EFE511A5A0E769BA3AE082
Derived From Document ID        : xmp.did:09F7FD273BC6E511BFB696A2AD9EA09E
Derived From Original Document ID: adobe:docid:indd:c000abc0-6409-11e3-b0f5-e6957f81696a
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:03:21 15:38:50+08:00
Create Date                     : 2016:03:21 15:38:50+08:00
Modify Date                     : 2016:03:22 10:49:23+08:00
Metadata Date                   : 2016:03:22 10:49:23+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Page Layout                     : SinglePage
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools