ASUSTeK Computer P01MA ASUS Tablet User Manual Manual

ASUSTeK Computer Inc ASUS Tablet Manual

Manual

Charging your ASUS Tablet
Speaker/Headset port
Rear camera
Volume button
Power button
USB 3.0 port
MicroSD card slot
To charge your ASUS Tablet:
Connect the USB cable to the power adapter.
Plug the power adapter into a grounded power outlet.
Plug the USB connector into your ASUS Tablet.
Charge your ASUS Tablet for eight (8) hours before
using it in battery mode for the rst time.
User Guide
ASUS Tablet
E10444
First Edition / July 2015
Charging your device
Ensure to fully charge your ASUS Tablet before using it in battery
mode for extended periods. Remember that the power adapter
charges your ASUS Tablet as long as it is plugged into an AC
power source. Be aware that it takes much longer to charge the
ASUS Tablet when it is in use.
IMPORTANT! Do not leave the ASUS Tablet connected to the
power supply once it is fully charged. ASUS Tablet is not designed
to be left connected to the power supply for extended periods of
time.
Airplane precautions
Contact your airline provider to learn about related inight
services that can be used and restrictions that must be followed
when using your ASUS Tablet in-ight.
IMPORTANT! You can send your ASUS Tablet through x-ray
machines (used on items placed on conveyor belts), but do not
expose them from magnetic detectors and wands.
Safety precautions
This ASUS Tablet should only be used in enviroments with
ambient temperatures between 0°C to 35°C (32°F to 95°F).
Long time exposure to extremely high or low temperature
may quickly deplete and shorten the battery life. To ensure the
battery’s optimal performance, ensure that it is exposed within
the recommended environment temperature.
Your ASUS Tablet
Audio speaker
Light sensor
Front camera
Touch screen panel
IMPORTANT!
• UseonlythebundledpoweradapterandUSBcabletocharge
your ASUS Tablet. Using a dierent power adapter may damage
your ASUS Tablet.
• PeeltheprotectivelmofromthepoweradapterandUSB
cable before charging the ASUS Tablet to prevent risk or injury.
• Ensurethatyouplugthepoweradaptertothecorrectpower
outlet with the correct input rating. The output voltage of this
adapter is DC 5.2 V, 1.35 A.
• WhenusingyourASUSTabletwhileplugged-intoapower
outlet, the grounded power outlet must be near the unit and
easily accessible.
• DonotplaceobjectsontopofyourASUSTablet.
NOTES:
• YourASUSTabletcanbechargedviatheUSBportonthe
computer only when it is in sleep mode (screen o) or turned
o.
• ChargingthroughtheUSBportofacomputermaytakelonger
time to complete.
• Ifyourcomputerdoesnotprovideenoughpowerforcharging
your ASUS Tablet, charge your ASUS Tablet via the grounded
power outlet instead.
• TouseyourZStylus(optional),ensuretoenableitundersystem
settings.
Installing a microSD card*
* The memory card slot supports microSD, microSDHC, and microSDXC card formats.
Memory card slot
Appendices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference.
• Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
thatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentcausesharmfulinterference
to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by doing one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiveris
connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Changes or modications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
15060-5720xxxx
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed
and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specic Absorption Rate, or SAR.
TheSARlimitsetbytheFCCis1.6W/kg.TestsforSARareconductedusingstandardoperatingpositions
accepted by the FCC with the EUT transmitting at the specied power level in dierent channels.
ThehighestSARvalueforthedeviceasreportedtotheFCCis1.14W/kgwhenplacednexttothebody.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this device is on le with the FCC
and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccidaftersearchingonFCCID:
MSQP01MA.
support.asus.com
Model name: P01MA
(Z580CA/Z8050CA)
Manufacturer ASUSTekCOMPUTERINC.
Address, City 4F,No.150,LI-TERD.,PEITOU,
TAIPEI112,TAIWAN
Authorized
Representative
in Europe
ASUS COMPUTER GmbH
Address, City HARKORTSTR.21-23,40880RATINGEN
Country GERMANY
Proper disposal
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
ATTENTION! Danger d’explosion lorsque la batterie est remplacée de façon
incorrecte.
DONOTthrowthebatteryinmunicipalwaste.Thesymbolofthecrossedout
wheeled bin indicates that the battery should not be placed in municipal waste.
DONOTthrowtheASUSTabletinmunicipalwaste.Thisproducthasbeendesigned
to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled
bin indicates that the product (electrical, electronic equipment and mercury-
containing button cell battery) should not be placed in municipal waste. Check local
regulations for disposal of electronic products.
DONOTthrowtheASUSTabletinre.DONOTshortcircuitthecontacts.DONOT
disassemble the ASUS Tablet.
Coating notice
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is
appliedtoinsulatethedeviceexceptontheareaswheretheI/Oportsarelocated.
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power
cords greater than or equal to: H05VV-F, 3G, 0.75 mm2 or H05VV-F, 2G, 0.75 mm2.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protectingourenvironment.Webelieveinprovidingsolutionsforyoutobeabletoresponsiblyrecycle
our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.
com/english/Takeback.htm for detailed recycling information in dierent regions.
Copyright Information
Nopartofthismanual,includingtheproductsandsoftwaredescribedinit,maybereproduced,
transmitted, transcribed, stored in a retrieval system, or translate into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permissionofASUSTeKCOMPUTERINC.(“ASUS”).
ASUSandASUSTabletlogoaretrademarksofASUSTekComputerInc.
Informationinthisdocumentissubjecttochangewithoutnotice.
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
For France, headphones/earphones for this device are compliant with the sound pressure level
requirementlaiddownintheapplicableEN50332-1:2000and/orEN50332-2:2003standardrequiredby
French Article L.5232-1.
CE Mark Warning
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and recognition of
conformity.
ThehighestCESARvalueforthedeviceis0.567W/Kg.
This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general public to
electromagnetic elds by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientic organizations through
regular and thorough evaluations of scientic studies. The unit of measurement for the European Council’s
recommendedlimitformobiledevicesisthe“SpecicAbsorptionRate”(SAR),andtheSARlimitis2.0W/
Kgaveragedover10gramofbodytissue.ItmeetstherequirementsoftheInternationalCommissionon
Non-IonizingRadiationProtection(ICNIRP).
Fornext-to-bodyoperation,thisdevicehasbeentestedandmeetstheICNRPexposureguidelinesand
theEuropeanStandardEN50566andEN62209-2.SARismeasuredwiththedeviceataseparationof0
cm to the body while transmitting at the highest certied output power level in all frequency bands of
the mobile device.
India RoHS
Thisproductcomplieswiththe“IndiaE-waste(ManagementandHandling)Rule2011”andprohibitsuse
of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl
ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by
weightinhomogenousmaterialsforcadmium,exceptfortheexemptionslistedinSchedule-IIoftheRule.
Green ASUS notice
ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’
health while minimizing the impact on the environment. The reduction of the number of the manual
pages complies with the reduction of carbon emission.
For the detailed user manual and related information, refer to the user manual included in the ASUS
Fonepad or visit the ASUS Support Site at http://support.asus.com/.
Regional notice for Singapore
ThisASUSproductcomplieswithIDAStandards.
Complies with
IDA Standards
DB103778
EC Declaration of Conformity
This product is compliant with the regulations of the R&TTE Directive 1999/5/EC. The Declaration of
Conformity can be downloaded from http://support.asus.com.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recoverdamagesfromASUS.Ineachsuchinstance,regardlessofthebasisonwhichyouareentitledto
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resultedfromomissionorfailureofperforminglegaldutiesunderthisWarrantyStatement,uptothe
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringementunderthisWarrantyStatement.
ThislimitalsoappliestoASUS’suppliersanditsreseller.ItisthemaximumforwhichASUS,itssuppliers,
and your reseller are collectively responsible.
UNDERNOCIRCUMSTANCESISASUSLIABLEFORANYOFTHEFOLLOWING:(1)THIRD-PARTYCLAIMS
AGAINSTYOUFORDAMAGES;(2)LOSSOF,ORDAMAGETO,YOURRECORDSORDATA;OR(3)SPECIAL,
INCIDENTAL,ORINDIRECTDAMAGESORFORANYECONOMICCONSEQUENTIALDAMAGES(INCLUDING
LOSTPROFITSORSAVINGS),EVENIFASUS,ITSSUPPLIERSORYOURRESELLERISINFORMEDOFTHEIR
POSSIBILITY.
IC Warning Statement
The device could automatically discontinue transmission in case of absence of information to transmit,
oroperationalfailure.Notethatthisisnotintendedtoprohibittransmissionofcontrolorsignaling
information or the use of repetitive codes where required by the technology.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products
marketed in the US/ Canada.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction
de sélection de l’indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au
Canada.
Canada, Industry Canada (IC) Notices
ThisdevicecomplieswithIndustryCanadalicense-exemptRSSstandard(s).
ThisClassBdigitalapparatuscomplieswithCanadianICES-003andCANICES-3(B)/NMB-3(B).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
thedevice.TheICIDforthisdeviceis3568A-P01MA.
Radio Frequency (RF) Exposure Information
TheradiatedoutputpoweroftheWirelessDeviceisbelowtheIndustryCanada(IC)radiofrequency
exposurelimits.TheWirelessDeviceshouldbeusedinsuchamannersuchthatthepotentialforhuman
contact during normal operation is minimized. This device has been evaluated for and shown compliant
withtheICSpecicAbsorptionRate(“SAR”)limitswheninstalledinspecichostproductsoperatedin
portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Canada, avis d’Industrie Canada (IC)
LeprésentappareilestconformeauxCNRd’IndustrieCanadaapplicablesauxappareilsradioexemptsde
licence.
CetappareilnumériquedeclasseBestconformeauxnormescanadiennesICES-003etCANICES-3(B)/
NMB-3(B).
Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer
d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuventaectersonfonctionnement.L’identiantICdecetappareilest3568A-P01MA.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans l est inférieure à la limite d’exposition aux fréquences
radiod’IndustrieCanada(IC).Utilisezl’appareilsansldefaçonàminimiserlescontactshumainslorsdu
fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specic Absorption Rate – Taux
d’absorptionspécique)d’IClorsqu’ilestinstallédansdesproduitshôtesparticuliersquifonctionnent
dans des conditions d’exposition à des appareils portables.
Ce périphérique est homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant à
l’appareildanslalisted’équipementradio(REL-RadioEquipmentList)d’IndustrieCanadarendez-vous
sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
DFS controls related to radar detection shall not be accessible to the user.
This device is restricted to indoor use only when operating in 5150 MHz to 5350 MHz frequency range.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the
e.i.r.p. limits specied for point-to-point and non point-to-point operation as appropriate.
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or
damagetoLE-LANdevices.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les
restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725
MHz doit se conformer à la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se
conformer à la limite de p.i.r.e. spéciée pour l’exploitation point à point et non point à point, selon le cas.
(iv) les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au
masque d’élévation, et énoncée à la section 6.2.2 3), doivent être clairement indiqués.
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-
5850MHzetquecesradarspourraientcauserdubrouillageet/oudesdommagesauxdispositifsLAN-EL.

Navigation menu