ASUSTeK Computer P022 ASUS Tablet User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2636697
Application ID	MeDrQ4Tg9YIEOX+jfNpQwA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	104.78kB (1309731 bits)
Date Submitted	2015-06-04 00:00:00
Date Available	2015-12-03 00:00:00
Creation Date	2017-09-30 15:14:41
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-30 15:14:41
Document Title	Manual
Document Creator	Adobe InDesign CS6 (Windows)

Charging your device
ASUS Tablet
Your ASUS Tablet
Ensure to fully charge your ASUS Tablet before using it in battery
mode for extended periods. Remember that the power adapter
charges your ASUS Tablet as long as it is plugged into an AC
power source. Be aware that it takes much longer to charge the
ASUS Tablet when it is in use.
Removing the back cover
Micro USB 2.0 port
Speaker/Headset port
Rear camera
Charging your ASUS Tablet
• Use only the bundled power adapter and micro USB cable to
charge your ASUS Tablet. Using a diferent power adapter may
damage your ASUS Tablet.
Locate the groove on the
bottom-right corner and pull the
back cover outwards until it is
removed completely.
• Peel the protective ilm of from the power adapter and micro
USB cable before charging the ASUS Tablet to prevent risk or
injury.
Volume button
IMPORTANT! Do not leave the ASUS Tablet connected to the
power supply once it is fully charged. ASUS Tablet is not designed
to be left connected to the power supply for extended periods of
time.
• Ensure that you plug the power adapter to the correct power
outlet with the correct input rating. The output voltage of this
adapter is DC 5.2 V, 1.35 A.
Power button
Groove
• When using your ASUS Tablet while plugged-in to a power
outlet, the grounded power outlet must be near the unit and
easily accessible.
Microphone
Airplane precautions
User Guide
Contact your airline provider to learn about related in-light
services that can be used and restrictions that must be followed
when using your ASUS Tablet in-light.
E10317
First Edition / June 2015
• Do not use or expose your ASUS Tablet near liquids, rain, or
moisture.
Installing a microSD card
Turn of your ASUS Tablet and remove the back cover before
inserting the microSD card to the slot. Close the back cover
before you turn on the device.
IMPORTANT! You can send your ASUS Tablet through x-ray
machines (used on items placed on conveyor belts), but do not
expose them to magnetic detectors and wands.
• Do not use your ASUS Tablet near heating equipment or in
places where there is likelihood of high temperature.
To charge your ASUS Tablet:
• Keep your ASUS Tablet away from sharp objects.
• Do not place objects on top of your ASUS Tablet.
Connect the micro USB cable to the power adapter.
Safety precautions
Audio speaker
Plug the power adapter into a grounded power outlet.
This ASUS Tablet should only be used in environments with
ambient temperatures between 0°C to 35°C (32°F to 95°F).
Front camera
Plug the micro USB connector into your ASUS Tablet.
Long time exposure to extremely high or low temperature
may quickly deplete and shorten the battery life. To ensure the
battery’s optimal performance, ensure that it is exposed within
the recommended environment temperature.
IMPORTANT!
Touch screen panel
Charge your ASUS Tablet for eight (8) hours before
using it in battery mode for the irst time.
NOTE: The memory card slot supports microSD, microSDHC, and
microSDXC card formats.
Appendices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment causes harmful interference
to radio or television reception, which can be determined by turning the equipment of and on, the user
is encouraged to try to correct the interference by doing one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit diferent from that to which the receiver is
•
Consult the dealer or an experienced radio/TV technician for help.
connected.
Changes or modiications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
NOTES:
• Your ASUS Tablet can be charged via the USB port on the
computer only when it is in sleep mode (screen of) or turned
of.
Label Location Declaration
We state that the label of FCC ID: MSQP022 will be put under the back cover and it is visible to the users as
they install the SD card.
support.asus.com
• Charging through the USB port of a computer may take longer
time to complete.
• If your computer does not provide enough power for charging
your ASUS Tablet, charge your ASUS Tablet via the grounded
power outlet instead.
15060-56800000
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed
and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Speciic Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions
accepted by the FCC with the EUT transmitting at the speciied power level in diferent channels.
The highest SAR value for the device as reported to the FCC is 1.12 W/kg when placed next to the body.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this device is on ile with the FCC
and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
MSQP022.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS standard(s).
This Class B digital apparatus complies with Canadian ICES-003 and CAN ICES-3(B)/NMB-3(B).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device. The IC ID for this device is 3568A-P022.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized. This device has been evaluated for and shown compliant
with the IC Speciic Absorption Rate (“SAR”) limits when installed in speciic host products operated in
portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Canada, avis d’Industrie Canada (IC)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence.
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et CAN ICES-3(B)/
NMB-3(B).
Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer
d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuvent afecter son fonctionnement. L’identiiant IC de cet appareil est 3568A-P022.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans il est inférieure à la limite d’exposition aux fréquences
radio d’Industrie Canada (IC). Utilisez l’appareil sans il de façon à minimiser les contacts humains lors du
fonctionnement normal.
EC Declaration of Conformity
This product is compliant with the regulations of the R&TTE Directive 1999/5/EC. The Declaration of
Conformity can be downloaded from http://support.asus.com.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Speciic Absorption Rate – Taux
d’absorption spéciique) d’IC lorsqu’il est installé dans des produits hôtes particuliers qui fonctionnent
dans des conditions d’exposition à des appareils portables.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers,
and your reseller are collectively responsible.
Ce périphérique est homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant à
l’appareil dans la liste d’équipement radio (REL - Radio Equipment List) d’Industrie Canada rendez-vous
sur:
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
IC Warning Statement
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products
marketed in the US/ Canada.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction
de sélection de l’indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au
Canada.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
For France, headphones/earphones for this device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-1:2000 and/or EN50332-2:2003 standard required by
French Article L.5232-1.
CE Mark Warning
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and protect the environment through
energy eicient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power
management feature is enabled by default. The monitor and computer are automatically set to sleep
within 10 and 30 minutes of user inactivity. Users could wake your computer through click the mouse,
press any key on the keyboard, or press the power button.
Please visit http://www.energy.gov/powermanagement for detail information on power management
and its beneits to the environment. In addition, please visit http://www.energystar.gov for detail
information on the ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on Freedos and Linux-based products.
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/5/EC) on the limitation of exposure of the general public to
electromagnetic ields by way of health protection.
Regional notice for Turkey
AEEE Yönetmeliğine Uygundur.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientiic organizations through
regular and thorough evaluations of scientiic studies. The unit of measurement for the European Council’s
recommended limit for mobile devices is the “Speciic Absorption Rate” (SAR), and the SAR limit is 2.0 W/
Kg averaged over 10 gram of body tissue. It meets the requirements of the International Commission on
Non-Ionizing Radiation Protection (ICNIRP).
Rechargeable Battery Recycling Service in North America
For US and Canada customers, you can call 1-800-822-8837 (toll-free) for recycling
information of your ASUS products’ rechargeable batteries.
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and
the European Standard EN 50566 and EN 62209-2. SAR is measured with the device at a separation of 1.0
cm to the body while transmitting at the highest certiied output power level in all frequency bands of
the mobile device.
Green ASUS notice
ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’
health while minimizing the impact on the environment. The reduction of the number of the manual
pages complies with the reduction of carbon emission.
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use
of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl
ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by
weight in homogenous materials for cadmium, except for the exemptions listed in Schedule-II of the Rule.
For the detailed user manual and related information, refer to the user manual included in the ASUS
Fonepad or visit the ASUS Support Site at http://support.asus.com/.
Copyright Information
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translate into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS and ASUS Tablet logo are trademarks of ASUSTek Computer Inc.
Information in this document is subject to change without notice.
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
declare the following apparatus:
Product name :
ASUS Tablet
Model name :
P022
EN 55022:2010+AC:2011
EN 61000-3-2:2014,ClassA
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
1999/5/EC-R&TTE Directive
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 300 330-1 V1.7.1(2010-02)
EN 300 330-2 V1.5.1(2010-02)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 62479:2010
EN 50385:2002
EN 62311:2008
batteries according to the instructions.
incorrecte.
ASUSTeK COMPUTER INC.
Address:
2004/108/EC-EMC Directive
Proper disposal
ATTENTION! Danger d’explosion lorsque la batterie est remplacée de façon
Manufacturer:
conform with the essential requirements of the following directives:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power
cords greater than or equal to: H05VV-F, 3G, 0.75 mm2 or H05VV-F, 2G, 0.75 mm2.
EC Declaration of Conformity
We, the undersigned,
Model name: P022
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50566:2013
2006/95/EC-LVD Directive
EN 60950-1: 2006 / A12: 2011
EN 60065:2002 / A12: 2011
EN 60950-1: 2006 / A2: 2013
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and recognition of
conformity.
The highest CE SAR value for the device is 0.119 W/Kg.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly recycle
our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.
com/english/Takeback.htm for detailed recycling information in diferent regions.
Coating notice
This equipment may be operated in:
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is
applied to insulate the device except on the areas where the I/O ports are located.
2009/125/EC-ErP Directive
DO NOT throw the battery in municipal waste. The symbol of the crossed out
wheeled bin indicates that the battery should not be placed in municipal waste.
DO NOT throw the ASUS Tablet in municipal waste. This product has been designed
to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled
bin indicates that the product (electrical, electronic equipment and mercurycontaining button cell battery) should not be placed in municipal waste. Check local
regulations for disposal of electronic products.
DK
AT
BE
BG
CH
CY
CZ
DE
EE
ES
FI
FR
GB
GR
HU
IE
IT
IS
LI
LT
LU
LV
MT
NL
NO
PL
PT
RO
SE
SI
SK
TR
Regional notice for California
WARNING! This product may contain chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Wash hands after handling.
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
2011/65/EU-RoHS Directive
DO NOT throw the ASUS Tablet in ire. DO NOT short circuit the contacts. DO NOT
disassemble the ASUS Tablet.
Manufacturer
Address, City
Authorized
Representative
in Europe
Address, City
Country
ASUSTek COMPUTER INC.
4F, No. 150, LI-TE RD., PEITOU,
TAIPEI 112, TAIWAN
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Ver. 150326
CE marking
(EC conformity marking)
Corrected Declaration Date: 10/06/2015
Year to begin affixing CE marking: 2015
Position :
CEO
Name :
Jerry Shen
Signature : __________
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Create Date                     : 2015:06:03 14:17:26+08:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2015:06:03 14:18:00+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:5dbda763-369f-42ec-b377-91b1dfba4417
Original Document ID            : adobe:docid:indd:c000abc0-6409-11e3-b0f5-e6957f81696a
Document ID                     : xmp.id:18ED7F2DB809E511B54E9041D2A229A4
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:17ED7F2DB809E511B54E9041D2A229A4
Derived From Document ID        : xmp.did:077E88975EF5E411AF80C3D9DBBEFDB0
Derived From Original Document ID: adobe:docid:indd:c000abc0-6409-11e3-b0f5-e6957f81696a
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:06:03 14:17:26+08:00
Metadata Date                   : 2015:06:03 14:18+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 2

EXIF Metadata provided by EXIF.tools