ASUSTeK Computer P028 ASUS Tablet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3474448
Application ID	I+0oYZ3Szuc/xqr0X7c1qw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	107.58kB (1344761 bits)
Date Submitted	2017-07-20 00:00:00
Date Available	2018-01-16 00:00:00
Creation Date	2017-07-06 11:14:34
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-07-12 19:30:17
Document Title	User manual
Document Creator	Adobe InDesign CS6 (Windows)

Charging your device
ASUS Tablet
Your ASUS Tablet
Ensure to fully charge your ASUS Tablet before using it in battery
mode for extended periods. Remember that the power adapter
charges your ASUS Tablet as long as it is plugged into an AC
power source. Be aware that it takes much longer to charge the
ASUS Tablet when it is in use.
Installing a MicroSD card
Charging your ASUS Tablet
Power button
Front camera
• Ensure that you plug the power adapter to the correct power
outlet with the correct input rating. The output voltage of this
adapter is DC 5.2V, 1A (Z301M, M1001M, R1001M) or DC 5V, 2A
(Z301MF, M1001MF, R1001MF).
Touch screen panel
Audio speakers
• When using your ASUS Tablet while plugged-in to a power
outlet, the grounded power outlet must be near the unit and
easily accessible.
Airplane precautions
User Guide
Contact your airline provider to learn about related in-flight
services that can be used and restrictions that must be followed
when using your ASUS Tablet in-flight.
• Do not use or expose your ASUS Tablet near liquids, rain, or
moisture.
• Do not use your ASUS Tablet near heating equipment or in
places where there is likelihood of high temperature.
IMPORTANT! You can send your ASUS Tablet through x-ray
machines (used on items placed on conveyor belts), but do not
expose them to magnetic detectors and wands.
Safety precautions
E12880
• Use only the bundled power adapter and USB Type-C cable to
charge your ASUS Tablet. Using a different power adapter may
damage your ASUS Tablet.
• Peel the protective film off from the power adapter and USB
Type-C cable before charging the ASUS Tablet to prevent risk or
injury.
Ambient light sensor
IMPORTANT! Do not leave the ASUS Tablet connected to the
power supply once it is fully charged. ASUS Tablet is not designed
to be left connected to the power supply for extended periods of
time.
IMPORTANT!
• Keep your ASUS Tablet away from sharp objects.
To charge your Tablet:
Rear camera
This ASUS Tablet should only be used in environments with
ambient temperatures between 0°C to 35°C (32°F to 95°F).
Volume button
Long time exposure to extremely high or low temperature
may quickly deplete and shorten the battery life. To ensure the
battery’s optimal performance, ensure that it is exposed within
the recommended environment temperature.
Speaker/Headset port
Microphone
USB Type-C port
MicroSD card slot
NOTE: The memory card slot supports microSD, microSDHC, and
microSDXC card formats.
Connect the USB Type-C cable to the power adapter.
Plug the USB Type-C connector into your ASUS Tablet.
Plug the power adapter into a grounded power outlet.
Charge your ASUS Tablet for eight (8) hours before
using it in battery mode for the first time.
• Do not place objects on top of your ASUS Tablet.
NOTE:
• Your ASUS Tablet can be charged via the USB port on the
computer only when it is in sleep mode (screen off) or turned
off.
• Charging through the USB port of a computer may take longer
time to complete.
• If your computer does not provide enough power for charging
your ASUS Tablet, charge your ASUS Tablet via the grounded
power outlet instead.
Appendices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment causes harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by doing one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
•
Consult the dealer or an experienced radio/TV technician for help.
connected.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The country code selection is for non-US model only and is not available to all US model. Per FCC
regulation, all WiFi product marketed in US must fixed to US operation channels only.
ZenTalk Fans Forum
For FCC and IC e-labelling information, please go to Settings > About > Regulatory information.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed
and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
www.asus.com/zentalk/global_forward.php
www.asus.com/support/
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions
accepted by the FCC with the EUT transmitting at the specified power level in different channels.
The highest SAR value for the device as reported to the FCC is 0.9 W/kg when placed next to the body.
15060-99000000
First Edition / July 2017
E12880_Z301M_MF_UM_16pages.indd 1
2017/7/6 �� 11:14:36
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as
in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC
and can be found at www.fcc.gov/general/fcc-id-search-page after searching on FCC ID: MSQP028.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada license-exempt RSS standard(s).
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter, except tested built-in radios.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device. The IC ID for this device is 3568A-P028.
For FCC and IC e-labelling information, please go to Settings > About > Regulatory information.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized. This device has been evaluated for and shown compliant
with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in
portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d’exposition aux fréquences
radio d’Industrie Canada (IC). Utilisez l’appareil sans fil de façon à minimiser les contacts humains lors
d’un fonctionnement normal. Cet appareil été évalué et démontré conforme aux limites de DAS (Débit
d’absorption spécifique) d’IC lorsqu’il est installé dans des produits hôtes particuliers qui fonctionnent
dans des conditions d’exposition à des appareils portables.
Pour consulter l’entrée correspondant à l’appareil dans la liste d’équipement radio (REL - Radio Equipment
List) d’Industrie Canada, rendez-vous sur http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng.
Pour des informations supplémentaires concernant l’exposition aux ondes radio au Canada, rendez-vous
sur http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.
IC Warning Statement
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
The Country Code Selection feature is disabled for products marketed in the US/Canada. For product
available in the USA/Canada markets, only channel 1-11 can be operated. Selection of other channels is
not possible.
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and
had been tested in accordance with the measurement methods and procedures specified in IEEE 1528.
Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the
e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Le présent appareil est conforme aux normes CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or
damage to LE-LAN devices.
Avertissement
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les
restrictions susmentionnées, notamment:
Pour plus d’informations sur les labels FCC et IC, allez dans Paramètres > À propos > Informations
réglementaires.
E12880_Z301M_MF_UM_16pages.indd 2
(iii) Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
(i) Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement à une utilisation
en intérieur afin de réduire les risques d’interférence préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux;
The Wi-Fi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the
table below:
AT
BE
BG
CZ
DK
EE
FR
(iv) Les pires angles d’inclinaison nécessaires pour rester conforme à la limite de p.i.r.e. applicable au
masque d’élévation, et énoncée à la section 6.2.2 (3), doivent être clairement indiqués.
DE
IS
IE
IT
EL
ES
CY
LV
LI
LT
LU
HU
MT
NL
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance
sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et
5650-5850 MHz et que ces radars pourraient créer des interférences et/ou des dommages aux dispositifs
LAN-EL.
NO
PL
PT
RO
SI
SK
TR
FI
SE
CH
UK
HR
EU Radio Equipment Directive compliance
Simplified EU Declaration of Conformity
Hereby, ASUSTek Computer Inc. declares that the radio equipment type P028 is in compliance with
Directive 2014/53/EU. Full text of EU declaration of conformity is available at
https://www.asus.com/support/. (Search for Z301M, Z301MF, R1001M, R1001MF, M1001M, M1001MF)
RF Output Table
Items
Bluetooth
7.66 (dBm)
Bluetooth 4.0-LE (2400~2483.5 MHz)
GSM
N/A (dBm)
GSM 1800 Burst (1710~1785 ; 1805~1880 MHz)
-0.29 (dBm)
N/A (dBm)
2.4GHz 802.11b (2400~2483.5 MHz)
WCDMA Band I (1920~1980 ; 2110~2170 MHz)
14.65 (dBm)
N/A (dBm)
2.4GHz 802.11g (2400~2483.5 MHz)
WLAN
GSM 900 Burst (880~915 ; 925~960 MHz)
WCDMA
WCDMA Band VIII (880~915 ; 927~960 MHz)
14.73 (dBm)
N/A (dBm)
2.4GHz 802.11n HT20 (2400~2483.5 MHz)
LTE Band I (1920~1980 ; 2110~2170 MHz)
13.56 (dBm)
N/A (dBm)
5GHz 802.11a (5150~5250 ; 5250~5350 ; 5470~5725 MHz)
LTE Band III (1710~1785 ; 1805~1880 MHz)
13.67 (dBm)
5GHz 802.11an HT20 (5150~5250 ; 5250~5350 ; 5470~5725 MHz)
13.67 (dBm)
N/A (dBm)
LTE
LTE Band VII (2500~2570 ; 2620~2690 MHz)
N/A (dBm)
5GHz 802.11an HT40 (5150~5250 ; 5250~5350 ; 5470~5725 MHz)
LTE Band VIII (880~915 ; 927~960 MHz)
13.92 (dBm)
N/A (dBm)
5GHz 802.11ac HT80 (5150~5250 ; 5250~5350 ; 5470~5725 MHz)
LTE Band XX (832~862 ; 791~821 MHz)
N/A (dBm)
N/A (dBm)
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Green ASUS notice
ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’
health while minimizing the impact on the environment. The reduction of the number of the manual
pages complies with the reduction of carbon emission.
For the detailed user manual and related information, refer to the user manual included in the ASUS
Tablet or visit the ASUS Support Site at https://www.asus.com/support/.
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save money and protect the
environment through energy efficient products and practices.
RF Exposure Information
This ASUS product has been tested and meets applicable European SAR limits. The SAR limit is 2.0 W/Kg
in countries that set the limit averaged over 10 grams of tissue. The specific maximum SAR values for this
device are as follows:
All ASUS slate computers with the ENERGY STAR logo comply with the ENERGY
STAR standard, and the power management feature is enabled by default. The
display will be automatically set to sleep within 10 minutes user inactivity. Users
could wake your computer through click the display, or press the power button.
Body: 0.37 W/Kg
When carrying this device or using it while worn on the body, either use an approved accessory such as
a holster or otherwise maintain a distance of 0 cm from the body to ensure compliance with RF exposure
requirements.
Maximum Radio-Frequency Output Power Table
Bluetooth RF (2400~2483.5 MHz)
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall comply with the e.i.r.p. limit; and
Canada, avis d’Industrie Canada (IC)
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Son utilisation est sujette aux deux conditions suivantes: (1) cet appareil ne doit pas créer d’interférences
et (2) cet appareil doit tolérer tout type d’interférences, y compris celles susceptibles de provoquer un
fonctionnement non souhaité de l’appareil. L’identifiant Industrie Canada de cet appareil est 3568A-P028.
(ii) Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 54705725 MHz doit se conformer à la limite de p.i.r.e.;
CE Marking
For France, headphones/earphones for this device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-1:2013 and/or EN50332-2:2013 standard required by
French Article L.5232-1.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers,
and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
Please visit http://www.energystar.gov/powermanagement for detail
information on power management and its benefits to the environment. In addition, please visit
http://www.energystar.gov for detail information on the ENERGY STAR joint program.
Proper disposal
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Risque d’explosion si la batterie n’est pas correctement remplacée. Jetez les
batteries usagées conformément aux instructions du fabricant.
DO NOT throw the battery in municipal waste. The symbol of the crossed out
wheeled bin indicates that the battery should not be placed in municipal waste.
DO NOT throw the ASUS Tablet in municipal waste. This product has been designed
to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled
bin indicates that the product (electrical, electronic equipment and mercurycontaining button cell battery) should not be placed in municipal waste. Check local
regulations for disposal of electronic products.
DO NOT throw the ASUS Tablet in fire. DO NOT short circuit the contacts. DO NOT
disassemble the ASUS Tablet.
Battery safety information
1. Do not disassemble or open, crush, bend, or deform, puncture, or shred.
2.
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse, or
expose to water or other liquids, expose to fire, explosion or other hazard.
3.
Only use the battery with a charging system that has been qualified with the system per CTIA
Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified
Regional notice for California
WARNING
Cancer and Reproductive Harm www.P65Warnings.ca.gov
4.
Promptly dispose of used batteries in accordance with local regulations.
5.
Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard
6.
Improper battery use may result on a fire, explosion, or other hand.
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power
cords greater than or equal to: H05VV-F, 3G, 0.75 mm2 or H05VV-F, 2G, 0.75 mm2.
Copyright Information
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translate into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
7.
For those host devices that utilize a USB port as a charging source, the host device’s user manual shall
ASUS and ASUS Tablet logo are trademarks of ASUSTek Computer Inc.
include a statement that the phone shall only be connected to CTIA-certified adapters, products that
Information in this document is subject to change without notice.
bear the USB-IF logo or products that have completed the USB-IF compliance program.
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
battery or charger may present a risk of fire, explosion, leakage, or other hazard.
surface, and the user suspects damage, take it to a service center for inspection.
Rechargeable Battery Recycling Service in North America
For US and Canada customers, you can call 1-800-822-8837 (toll-free)
for recycling information of your ASUS products’ rechargeable batteries.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly recycle
our products, batteries, other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different
regions.
Coating notice
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is
applied to insulate the device except on the areas where the I/O ports are located.
ASUS ZenPad 10, M Series, R Series tablet is certified by ASUS under the name ASUS Pad P028.
Model name: P028 (Z301M, Z301MF, R1001M, R1001MF,
M1001M, M1001MF)
Manufacturer
Address, City
Authorized
Representative
in Europe
Address, City
Country
ASUSTek COMPUTER INC.
4F, No. 150, LI-TE Rd., PEITOU,
TAIPEI 112, TAIWAN
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
2017/7/6 �� 11:14:36

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Instance ID                     : uuid:dc07c9e6-ac15-470c-b381-02b9a35172c7
Original Document ID            : adobe:docid:indd:c000abc0-6409-11e3-b0f5-e6957f81696a
Document ID                     : xmp.id:F3E6F1FBF861E7119E69BA44D3387819
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F2E6F1FBF861E7119E69BA44D3387819
Derived From Document ID        : xmp.did:851D5149C650E7118B839C1ADA155436
Derived From Original Document ID: adobe:docid:indd:c000abc0-6409-11e3-b0f5-e6957f81696a
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:07:06 11:14:34+08:00
Create Date                     : 2017:07:06 11:14:34+08:00
Modify Date                     : 2017:07:12 19:30:17+08:00
Metadata Date                   : 2017:07:12 19:30:17+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools