ASUSTeK Computer PCEN10 ASUS 150Mbps 802.11 b/g/n Wireless PCI-E card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1411886
Application ID	4Zy7xIQj8fsRXSEmKvox7A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.99kB (462403 bits)
Date Submitted	2011-01-31 00:00:00
Date Available	2011-01-31 00:00:00
Creation Date	2011-01-26 11:09:11
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-01-26 11:09:11
Document Title	untitled

PCE-N10
Wireless Local Area Network Card
(For 802.11 g/b/n Wireless Networks)
User Manual
January 2011
Copyright © 2009 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any
form or by any means, except documentation kept by the purchaser for backup purposes,
without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY
ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
Manufacturer contact information
ASUSTeK Computer Inc. (Asia-Pacific)
Company address:
15 Li-Te Road, Beitou, Taipei 11259
Telephone:
+886-2-2894-3447
Fax:
+886-2-2890-7798
E-mail:
info@asus.com.tw
Web site:
http://www.asus.com.tw
ASUS Computer International (America)
Company address:
800 Corporate Way, Fremont, CA 94539, USA
General (tel):
+1-510-739-3777
General (fax):
+1-510-608-4555
Web site address:
http://usa.asus.com
Technical support
General support:
+1-502-995-0883
Support (fax):
+1-502-933-8713
Online support:
http://vip.asus.com/eservice/techserv.aspx
ASUS Computer GmbH (Germany & Austria)
Company address:
Harkortstr. 21-23, 40880 Ratingen, Germany
General (tel):
+49-02102-95990
General (fax):
+49-02102-959911
Web site address:
http://www.asuscom.de
Online contact:
http://www.asuscom.de/sales
Technical support
Components:
+49-02102-95990
Fax:
+49-02102-959911
Online support:
http://vip.asus.com/eservice/techserv.aspx?SLanguage=de-de
PCE-N10 WLAN Card User Manual
Table of contents
1. Introduction ..........................................................................................1
1.1 Package contents ............................................................................1
1.2 System requirements .......................................................................1
1.3 Hardware .........................................................................................1
2. Installing the PCE-N10 driver and utilities ..........................................2
3. Configuring PCE-N10 using ASUS utility............................................3
3.1 Connecting to a wireless network manually .....................................3
3.2 Connecting to a wireless network using WPS .................................4
3.3 Soft AP mode (Windows® XP/Vista) .................................................5 & 6
4. Software information ......................................................................... 7
4.1 ASUS WLAN Control Center ......................................................... 7
4.2 ASUS WLAN Card Setting Utility ................................................... 7
5. Configuring PCE-N10
using Windows® WZC service ......................13
6. Troubleshooting .................................................................................14
7. Glossary..............................................................................................16
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
Notice
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
CE Mark Warning
This is a Class B product, in a domestic environment, this productuct may cause radio
interference, in which case the user may be required to take adequate measures.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
DGT Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency,
increase the power, or change the characteristics and functions of the original
design of the certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the
navigation safety nor interfere a legal communication, if an interference is found,
the service will be suspended until improvement is made and the interference no
longer exists.
低功率電波輻射性電機管理辦法
(1)「經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能」以及(2)「低功率射頻電機之使用不得影響飛航安全及干擾合法
通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依
電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾」。
IC Warning Statement
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for
use with this device.
Ant.
Antenna Type
Connector
Gain (dBi)
Remark
Dipole Antenna
Reversed-SMA
5.00
TX / RX
Dipole Antenna
Reversed-SMA
3.00
TX / RX
Dipole Antenna
Reversed-SMA
2.00
TX / RX
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is
not possible.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
1. Introduction
1.1
Package contents
Check your PCE-N10 WLAN Card package for the following items.
• ASUS PCE-N10 WLAN Card x1
• External dipole antenna x1
• Quick Start Guide x1
• Support CD x1
• Low profile bracket x1
• Warranty card x1
NOTE: If any of the above items is damaged or missing, contact your retailer
immediately.
1.2
System requirements
Before using the PCE-N10 WLAN Card, check if your system meets the following
requirements:
• Windows 7 / Vista / XP
• An empty PCI express slot
• CD-ROM drive
• At least 200MB of available disk space.
1.3
Hardware
LED Status indicator -
LED Name
Link
Tx/Rx
Light Status
On
Description
Link to a wireless access point
Off
Not linked to any wireless access point
Blinking
Transferring / receiving data
On
Wireless WPS function is enabled.
Off
No wireless activity
Hardware WPS button (only support Windows OS) –
Assembling the WLAN card to your PC, press this button above 3 sec., also press the software or
hardware button if with of the wireless access point you would like associate, then, the connection
will be built.
External dipole antenna The PCE-N10 WLAN Card package includes an external dipole antenna. We
recommend that you straighten up the antenna for the maximum range and best
link quality.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
2. Installing the PCE-N10 driver and utilities
IMPORTANT: Install the ASUS PCE-N10 WLAN Card into your computer before
installing the driver and utilities from the bundled Support CD.
To install the driver and utilities for your ASUS PCE-N10 WLAN Card:
1. Place the bundled Support CD into the optical drive. An Autorun screen appears
if the Autorun function is enabled on your computer.
NOTE: If the Autorun function is not enabled on your computer, double-click
SETUP.EXE from the root directory to run the Support CD.
2. From the Autorun screen, select your
language and click Install Utilities/Driver
Driver.
4. Installation.
3. An InstallShield Wizard screen
appears. Click Next to continue.
5. Select Yes, I want to restart my
computer now. Click Finish to
complete the installation.
6. After your computer reboots, select Use
ASUS WLAN utilities to allow the ASUS
utility to manage your WLAN card. Click OK.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
3. Configuring PCE-N10 using ASUS utility
3.1
Connecting to a wireless network manually
To connect PCE-N10 to a station (Ad Hoc mode) manually:
1. Right-click the ASUS WLAN Card
Setting Utility icon in the
Windows® system tray, then select
Wireless Setting.
2. You may click Survey table, click Search
button for wireless networks, select a network (AP
from the available network list, then, click
Connect button .
3. If Encryption(Security) is enabled on the
network(AP), do the same security settings on your
WLAN card as those on the network(AP).
Click Save button .
Setup is completed. The Status table displays
information such as the association state, current
data rate, and radio state.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
3.2
Connecting to a wireless network using WPS
The ASUS PCE-N10 WLAN Card supports the WPS function that helps you set up
a secure wireless network easily.
IMPORTANT: Ensure that the network(AP) you are trying to connect is to supports the
WPS function.
3.2. To connect PCE-N10 to a WPS-enabled AP using the WPS push button:
2. Select Use the WPS button “, then click Next
button.
1. Click the WPS tab.
3. When scanning for the network(AP), press
the software or hardware if with of the
wireless access point to build the connection.
4. Click Finish button. The page shows that your
WLAN card has connected to the networks
successfully.
5. Or Select Use PIN code button.
6.Key in 8 digital PIN code from network(AP)’s
web user interface Select, click Next button.
7. Click Finish button. The page shows that your
WLAN card has connected to the networks
successfully.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
3.3
Soft AP mode (Windows® XP/Vista/7)
The ASUS PCE-N10 WLAN Card supports the Soft AP mode. In this mode, the
WLAN card acts as a virtual AP.
IMPORTANT: Before configuring the Soft AP mode, connect your computer to a
wired network to provide network access for your wireless clients.
To switch to the Soft AP mode:
1. Click AP button, located on the lower
left corner, switch to the Software AP
mode.
2. Clink General table, then, click ICS
button to enable ICS.
(The General table displays the
wireless clients that are currently
connecting to the Soft AP.)
3.Select a network(station) from the
available networks list, Click Apply.
The picture indicates that your WLAN card
has switched to the Soft AP mode
successfully after you click OK.
• The ASUS WLAN Card Setting
Utility icon
in the system tray
switches to the ASUS Wireless Access Point Utility icon
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
In the Soft AP mode, you can limit the wireless clients that associate with the
WLAN card through the access control policy page. Click Configuration table, click Edit
Config button and then, click ACL button.
1.To disable the access control function,
click Disable button from the Access
Control Policy.
2. To allow a wireless client to associate
with the WLAN card:
a. Select Access button from the
Access Control Policy.
b. Key in its MAC address in the
lower left column.
c. Click Add Mac button.
Only the wireless clients on the Accept list are allowed to associate with the WLAN
card.
3.To prevent a wireless client from associating with the WLAN card:
a. Select Reject button from the Access Control Policy.
b. Key in its MAC address in the lower left column.
c. Click Add Mac button.
The wireless clients on the Reject list are not allowed to associate with the WLAN
card.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
4. Software information
4.1
ASUS WLAN Control Center
ASUS WLAN Control Center includes ASUS WLAN Card Setting Utility (Station
mode) and ASUS Wireless Access Point Utility (Soft AP mode) which help you
manage your WLAN card easily.
4.2
ASUS WLAN Card Setting Utility
ASUS WLAN Card Setting Utility provides you with an easy interface to set up
wireless connections. This section explains the buttons, fields, and configuration
options on the user interface.
To enable your WLAN card, click Start > All programs> ASUS Wireless LAN card. The system
tray icon switches as is shown in the picture.
ASUS WLAN Card Setting Utility system tray icon
Right-click the ASUS WLAN Card Setting Utility system tray
icon to display the following options:
• Wireless Settings - Launches the ASUS WLAN Card
Setting Utility.
• Activate Configuration - Activates a preset profile.
• Help - Launches the help file.
• WPS - Launches the WPS wizard.
• About Control Center - Displays the utility version of
your Control Center
• Exit Control Center - Closes the ASUS WLAN Control Center.
ASUS WLAN Card
PCI-G31 WLAN Card User Manual
Left-click the ASUS WLAN Card Setting Utility system tray icon to display the
following options:
• Wireless Radio On - Turns the wireless radio ON.
• Wireless Radio Off - Turns the wireless radio OFF.
• Search & Connect - Displays the available wireless
networks.
Double-click the icon to launch the ASUS WLAN Card Setting utility.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
Survey Displays the connection status:
SSID - Displays the name of the wireless networks that the WLAN card is going to
connect.
MAC Address - Indicates the hardware address of the WLAN card. A Mac
address is a unique identifier assigned to networking devices. It consists of six
groups of two hexadecimal digits (0 through 9 and A through F) separated by
colons, e.g. 00:E0:18:F0:05:C0.
Channel - Displays the channel of the wireless networks.
Network Type - Displays the WLAN card type like infrastructure.
Security- Displays the encryption of the wireless networks.
Search – List the wireless networks that the WLAN card is going to connect.
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
Config - Basic
Network Type
Infrastructure - Select the Infrastructure
mode to establish a connection with an
wireless access point.
Ad Hoc - Select the Ad Hoc mode to
communicate with a station. An Ad Hoc
network is formed quickly and easily
without pre-planning. For example,
you can share meeting notes among
networked computer in a meeting room.
Action mode name & SSID - Key in or select a network from network list of the wireless access point
you are trying to connect to. An SSID must be valid characters and have a maximum of 32 case
sensitive characters, such as Wireless LAN.
NOTE: Set the SSID to a null string if you want to allow your WLAN card to
connect to any AP it can find. You cannot use a null string in the Ad Hoc mode.
Channel - Select a radio channel for your WLAN card. In the Infrastructure
mode, your WLAN card automatically selects the correct channel required to
communicate with an AP and this field shows Auto. In the Ad Hoc mode, you are
allowed to select a channel for your WLAN Card. WLAN cards in the same network
can communicate with each other if they have the same channel setting.
The radio channels you can use depend on the regulations in your country. In the
United States (FCC) and Canada (IC), channels 1 to 11 are supported. In Europe
(ETSI), channels 1 to 13 are supported. In Japan (MKK), channels 1 to 14 are
supported.
Data Rate - Auto: The WLAN card adjusts to the most suitable transmission rate automatically.
Others
Encryption - Launches the Encryption page.
Advanced - Launches the Advanced page. In most cases, you do not need to
change the default values.
Troubleshooting - Displays the troubleshooting solutions.
10
PCE-N10 WLAN Card User Manual
Config - Encryption
The Encryption page allows you to set up the encryption settings for your WLAN
card. For data confidentiality in a wireless environment, IEEE 802.11 specifies a Wired
Equivalent Privacy (WEP) algorithm to offer transmission privacy similar to wired network.
WEP uses keys to encrypt data packets sent and decrypt data packets received. The
encryption process can scramble frame bits to avoid disclosure to others. Wi-Fi Protected
Access (WPA) is an improved security system for 802.11 that encrypts data sent
over radio waves. WPA is developed to overcome the weakness of the WEP
protocol.
Network Authentication - Set up authentication for your WLAN card. Options are:
Open - Sets the network operating in the Open System mode that disables
authentication protection for the network or use the WEP encryption for the
network.
Shared - Sets the network operating in the Shared Key mode that uses the
WEP encryption for your network.
WPA-PSK and WPA2-PSK – Use the WPA Pre-Shared Key/WPA2 Pre-Shared Key in
the Infrastructure mode for authentication.
11
PCE-N10 WLAN Card User Manual
Data Encryption - In the Open and Shared authentication modes, options are:
Disabled and WEP.
Disabled - Disables the encryption protection for your WLAN card.
WEP - Encrypts the data before it is transmitted over the air. You can
communicate with wireless devices that use the same WEP keys.
In the WPA-PSK and WPA2-PSK authentication modes, options are:
Temporal Key Integrity Protocol (TKIP) and Advanced Encryption Standard (AES).
TKIP - Dynamically generates unique keys to encrypt data packet.
AES - Offers stronger protection and increases the complexity of wireless
encryption. It is a symmetric 128-bit block encryption method that works
simultaneously on multiple network layers.
Wireless Network Key (WEP) - This option becomes configurable when you select WEP in the
Data encryption field. 64-bit WEP key uses 5 ASCII characters (10 hexadecimal digits). 128-bit
WEP key uses 13 ASCII (26 hexadecimal digits).
Key Format - Allows you to select the key format.
Manual Assignment(WPA and WPA2) - Allows you to assign WEP Keys
manually.
Key Length(WEP) - Allows you to select the key length. For 64bits encryption, each
key consists of 10 hexadecimal digits or 5 ASCII characters. For 128bits
encryption, each key consists of 26 hexadecimal digits or 13 ASCII characters.
Select one as your Default Key - Allows you to select one of the four WEP
Keys as the default key.
12
ASUS WLAN Card
PCE-N10 WLAN Card User Manual
Config - Advanced
This Advanced page is intended for
experienced users to set up additional
parameters for the WLAN card. We
recommend that you keep the default
values.
RTS Threshold (0-2347) - The Request to Send/Clear to Send (RTS/CTS)
function is used to minimize collisions among wireless stations. When RTS/CTS is
enabled, the router refrains from sending a data frame until another RTS/CTS
handshake is
completed. Enable RTS/CTS by setting a specific packet size threshold. The
default value (2347) is recommended.
Fragmentation Threshold (256-2346) - Fragmentation is used to divide 802.11
frames into smaller pieces (fragments) that are sent separately to the destination.
Enable fragmentation by setting a specific packet size threshold. If there is
an excessive number of collisions on the WLAN, experiment with different
fragmentation values to increase the reliability of frame transmissions. The default
value (2346) is recommended for normal use.
Preamble Mode - Select the preamble mode. The default value is Auto.
5. Using Windows® Wireless Function
Left-click the ASUS WLAN Control
Center system tray icon, then click Exit
button, then, ASUS WLAN Control Center
will be switched off.
Click Windows Wireless button to use it.
ASUS WLAN Card
13
PCE-N10 WLAN Card User Manual
6. Troubleshooting
This chapter provides solutions to problems which you may encounter when
installing or using the ASUS PCI-G31 WLAN card. Contact a qualified service
technician for assistance if the problem still exists after you have performed the
troubleshooting solutions.
How do I verify that my WLAN card is installed properly?
1. Right-click My Computer from the Start menu, then select Properties.
2. Select the Hardware tab, then click Device Manager.
3. Double-click Network adapters.
4. Double-click Ralink Turbo Wireless LAN Card. A Ralink Turbo Wireless LAN
Card Properties window appears.
5. Check Device status to see if the WLAN Card is working properly.
My WLAN card cannot connect to any Access Points
• Check if Network Type is set to the Infrastructure mode.
• Check if the SSID of your WLAN card is the same as that of the access point
you want to connect to.
• Check if the Encryption settings of your WLAN card are the same as those of
the access point you want to connect to.
ASUS WLAN Card
14
PCI-G31 WLAN Card User Manual
My WLAN card cannot connect to a station or WLAN card.
• Check if Network Type is set to the Ad Hoc mode.
• Check if the SSID of your WLAN card is the same as that of the station or the
WLAN card you want to connect to.
• Check if the Channel of your WLAN card is the same as that of the station or
the WLAN card you want to connect to.
• Check if the Encryption settings of your WLAN card are the same as those of
the station or the WLAN card you want to connect to.
The connection quality is bad and the signal strength is weak.
• Keep your WLAN card away from microwave ovens and large metal objects to
avoid radio interference. Adjust the WLAN card antenna.
• Move your WLAN card closer to the access point, station, or WLAN card you
want to connect to.
The TCP/IP protocol does not bind to the WLAN Card.
This occurs when your PC already has six TCP/IP bindings in Windows® 98 or ten
bindings in Windows® Me. These limits are imposed by the Microsoft® operating
system.
Solution: If your computer already has the maximum number of TCP/IP bindings,
remove one of the network adapters from the Network configuration before
installing the WLAN Card driver.
15
ASUS WLAN Card
PCI-G31 WLAN Card User Manual
7. Glossary
Access Point (AP)
A networking device that seamlessly connects wired and wireless networks. Access
Points combined with a distributed system support the creation of multiple radio
cells that enable roaming throughout a facility.
Ad Hoc
A wireless network composed solely of stations within mutual communication range
of each other (no Access Point).
Basic Rate Set
This option allows you to specify the data transmission rate.
Basic Service Area (BSS)
A set of stations controlled by a single coordination function.
Broadband
A type of data transmission in which a single medium (such as cable) carries
several channels of data at once.
Channel
An instance of medium use for the purpose of passing protocol data units that
may be used simultaneously, in the same volume of space, with other instances
of medium use (on other channels) by other instances of the same physical layer,
with an acceptably low frame error ratio due to mutual interference.
Client
A client is the desktop or mobile PC that is connected to your network.
ASUS WLAN Card
16
PCI-G31 WLAN Card User Manual
COFDM (for 802.11a or 802.11g)
Signal power alone is not enough to maintain 802.11b-like distances in an
802.11a/g environment. To compensate, a new physical-layer encoding technology
was designed that departs from the traditional direct-sequence technology being
deployed today. This technology is called COFDM (coded OFDM). COFDM was
developed specifically for indoor wireless use and offers performance much
superior to that of spread-spectrum solutions. COFDM works by breaking one
high-speed data carrier into several lowerspeed subcarriers, which are then
transmitted in parallel. Each high-speed carrier is 20MHz wide and is broken
up into 52 subchannels, each approximately 300KHz wide. COFDM uses 48 of
these subchannels for data, while the remaining four are used for error correction.
COFDM delivers higher data rates and a high degree of multipath reflection
recovery, thanks to its encoding scheme and error correction.
Each subchannel in the COFDM implementation is about 300KHz wide. At the
low end of the speed gradient, BPSK (binary phase shift keying) is used to
encode 125Kbps of data per channel, resulting in a 6,000Kbps, or 6Mbps, data
rate. Using quadrature phase shift keying, you can double the amount of data
encoded to 250Kbps per channel, yielding a 12Mbps data rate. And by using
16-level quadrature amplitude modulation encoding 4bits per hertz, you can
achieve a data rate of 24Mbps. The 802.11a/g standard specifies that all 802.11a/
g-compliant products must support these basic data rates. The standard also lets
the vendor extend the modulation scheme beyond 24Mbps. Remember, the more
bits per cycle (hertz) that are encoded, the more susceptible the signal will be to
interference and fading, and ultimately, the shorter the range, unless power output
is increased.
Default Key
This option allows you to select the default WEP key. This option allows you to
use WEP keys without having to remember or write them down. The WEP keys
generated using the Pass Phrase is compatible with other WLAN products. The
Pass Phrase option is not as secure as manual assignment.
Device Name
Also known as DHCP client ID or network name. Sometimes provided by an ISP
when using DHCP to assign addresses.
DHCP (Dynamic Host Configuration Protocol)
This protocol allows a computer (or many computers on your network) to be
automatically assigned a single IP address from a DHCP server.
17
ASUS WLAN Card
PCI-G31 WLAN Card User Manual
DNS Server Address (Domain Name System)
DNS allows Internet host computers to have a domain name and one or more IP
addresses. A DNS server keeps a database of host computers and their respective
domain names and IP addresses, so that when a user enters a domain name into
the Internet browser, the user is sent to the proper IP address. The DNS server
address used by the computers on your home network is the location of the DNS
server your ISP has assigned.
DSL Modem (Digital Subscriber Line)
A DSL modem uses your existing phone lines to transmit data at high speeds.
Direct-Sequence Spread Spectrum (for 802.11b)
Spread spectrum (broadband) uses a narrowband signal to spread the transmission
over a segment of the radio frequency band or spectrum. Direct-sequence is a
spread spectrum technique where the transmitted signal is spread over a particular
frequency range.
Direct-sequence systems communicate by continuously transmitting a redundant
pattern of bits called a chipping sequence. Each bit of transmitted data is mapped
into chips and rearranged into a pseudorandom spreading code to form the
chipping sequence. The chipping sequence is combined with a transmitted data
stream to produce the output signal.
Wireless mobile clients receiving a direct-sequence transmission use the spreading
code to map the chips within the chipping sequence back into bits to recreate the
original data transmitted by the wireless device. Intercepting and decoding a directsequence transmission requires a predefined algorithm to associate the spreading
code used by the transmitting wireless device to the receiving wireless mobile
client.
This algorithm is established by IEEE 802.11b specifications. The bit redundancy
within the chipping sequence enables the receiving wireless mobile client to
recreate the original data pattern, even if bits in the chipping sequence are
corrupted by interference. The ratio of chips per bit is called the spreading ratio.
A high spreading ratio increases the resistance of the signal to interference. A
low spreading ratio increases the bandwidth available to the user. The wireless
device uses a constant chip rate of 11Mchips/s for all data rates, but uses different
modulation schemes to encode more bits per chip at the higher data rates. The
wireless device is capable of an 11 Mbps data transmission rate, but the coverage
area is less than a 1 or 2 Mbps wireless device since coverage area decreases as
bandwidth increases.
ASUS WLAN Card
18
PCI-G31 WLAN Card User Manual
Encryption
This provides wireless data transmissions with a level of security. This option
allows you to specify a 64-bit or a 128-bit WEP key. A 64-bit encryption contains
10 hexadecimal digits or 5 ASCII characters. A 128-bit encryption contains 26
hexadecimal digits or 13 ASCII characters.
64-bit and 40-bit WEP keys use the same encryption method and can interoperate
on wireless networks. This lower level of WEP encryption uses a 40-bit (10
hexadecimal digits assigned by the user) secret key and a 24-bit Initialization
Vector assigned by the device. 104-bit and 128-bit WEP keys use the same
encryption method.
All wireless clients in a network must have identical WEP keys with the access
point to establish connection. Keep a record of the WEP encryption keys.
Extended Service Set (ESS)
A set of one or more interconnected basic service set (BSSs) and integrated local
area networks (LANs) can be configured as an Extended Service Set.
ESSID (Extended Service Set Identifier)
You must have the same ESSID entered into the gateway and each of its wireless
clients. The ESSID is a unique identifier for your wireless network.
Ethernet
The most widely used LAN access method, which is defined by the IEEE 802.3
standard. Ethernet is normally a shared media LAN meaning all devices on the
network segment share total bandwidth. Ethernet networks operate at 10Mbps
using CSMA/CD to run over 10-BaseT cables.
Firewall
A firewall determines which information passes in and out of a network. NAT can
create a natural firewall by hiding a local network’s IP addresses from the Internet.
A Firewall prevents anyone outside of your network from accessing your computer
and possibly damaging or viewing your files.
Gateway
A network point that manages all the data traffic of your network, as well as to the
Internet and connects one network to another.
19
ASUS WLAN Card
PCI-G31 WLAN Card User Manual
ICS
ICS is used to share one computer’s Internet connection with the rest of the
computers on your network. When this computer is connected to the Internet, all
the communications to and from the Internet on your network are sent through this
computer which is called the host computer. The rest of the computers can send
and receive e-mail messages and access the web as if it were connected directly
to the Internet.
IEEE
The Institute of Electrical and Electronics Engineers. The IEEE sets standards
for networking, including Ethernet LANs. IEEE standards ensure interoperability
between systems of the same type.
IEEE 802.11
IEEE 802.xx is a set of specifications for LANs from the Institute of Electrical
and Electronic Engineers (IEEE). Most wired networks conform to 802.3, the
specification for CSMA/CD based Ethernet networks or 802.5, the specification for
token ring networks. 802.11 defines the standard for wireless LANs encompassing
three incompatible (non-interoperable) technologies: Frequency Hopping Spread
Spectrum (FHSS), Direct Sequence Spread Spectrum (DSSS), and Infrared. 802.11
specifies a carrier sense media access control and physical layer specifications for
1 and 2 Mbps wireless LANs.
IEEE 802.11a (54Mbits/sec)
Compared with 802.11b: The 802.11b standard was designed to operate in the
2.4GHz ISM (Industrial, Scientific and Medical) band using direct-sequence
spreadspectrum technology. The 802.11a standard, on the other hand, was
designed to operate in the more recently allocated 5-GHz UNII (Unlicensed
National Information Infrastructure) band. And unlike 802.11b, the 802.11a standard
departs from the traditional spread-spectrum technology, instead using a frequency
division multiplexing scheme that’s intended to be friendlier to office environments.
The 802.11a standard, which supports data rates of up to 54 Mbps, is the Fast
Ethernet analog to 802.11b, which supports data rates of up to 11 Mbps. Like
Ethernet and Fast Ethernet, 802.11b and 802.11a use an identical MAC (Media
Access Control). However, while Fast Ethernet uses the same physical-layer
encoding scheme as Ethernet (only faster), 802.11a uses an entirely different
encoding scheme, called OFDM (orthogonal frequency division multiplexing).
The 802.11b spectrum is plagued by saturation from wireless phones, microwave
ovens and other emerging wireless technologies, such as Bluetooth. In contrast,
802.11a spectrum is relatively free of interference.
ASUS WLAN Card
20
PCI-G31 WLAN Card User Manual
The 802.11a standard gains some of its performance from the higher frequencies
at which it operates. The laws of information theory tie frequency, radiated power
and distance together in an inverse relationship. Thus, moving up to the 5GHz
spectrum from 2.4GHz will lead to shorter distances, given the same radiated
power and encoding scheme.
Compared with 802.11g: 802.11a is a standard for access points and radio
NICs that is ahead of 802.11g in the market by about six months. 802.11a operates
in the 5GHz frequency band with twelve separate non-overlapping channels. As
a result, you can have up to twelve access points set to different channels in the
same area without them interfering with each other. This makes access point
channel assignment much easier and significantly increases the throughput the
wireless LAN can deliver within a given area. In addition, RF interference is much
less likely because of the less-crowded 5GHz band.
IEEE 802.11b (11Mbits/sec)
In 1997, the Institute of Electrical and Electronics Engineers (IEEE) adopted the
802.11 standard for wireless devices operating in the 2.4 GHz frequency band.
This standard includes provisions for three radio technologies: direct sequence
spread spectrum, frequency hopping spread spectrum, and infrared. Devices that
comply with the 802.11 standard operate at a data rate of either 1 or 2 Mbps.
In 1999, the IEEE created the 802.11b standard. 802.11b is essentially identical
to the 802.11 standard except 802.11b provides for data rates of up to 11Mbps for
direct sequence spread spectrum devices. Under 802.11b, direct sequence devices
can operate at 11Mbps, 5.5Mbps, 2Mbps, or 1Mbps. This provides interoperability
with existing 802.11 direct sequence devices that operate only at 2Mbps.
Direct sequence spread spectrum devices spread a radio signal over a range of
frequencies. The IEEE 802.11b specification allocates the 2.4GHz frequency band
into 14 overlapping operating Channels. Each Channel corresponds to a different
set of frequencies.
IEEE 802.11g
802.11g is a new extension to 802.11b (used in majority of wireless LANs today)
that broadens 802.11b’s data rates to 54 Mbps within the 2.4 GHz band using
OFDM (orthogonal frequency division multiplexing) technology. 802.11g allows
backward compatibility with 802.11b devices but only at 11 Mbps or lower,
depending on the range and presence of obstructions.
Infrastructure
A wireless network centered about an access point. In this environment, the access
point not only provides communication with the wired network but also mediates
wireless network traffic in the immediate neighborhood.
21
ASUS WLAN Card
PCI-G31 WLAN Card User Manual
IP (Internet Protocol)
The TCP/IP standard protocol that defines the IP datagram as the unit of
information passed across an Internet and provides the basis for connectionless
packet delivery service. IP includes the ICMP control and error message protocol
as an integral part. It provides the functional equivalent of ISO OSI Network
Services.
IP Address
An IP address is a 32-bit number that identifies each sender or receiver of
information that is sent across the Internet. An IP address has two parts: the
identifier of a particular network on the Internet and an identifier of the particular
device (which can be a server or a workstation) within that network.
ISM Bands (Industrial, Scientific, and Medicine Bands)
Radio frequency bands that the Federal Communications Commission (FCC)
authorized for wireless LANs. The ISM bands are located at 902MHz, 2.400GHz,
and 5.7GHz.
ISP (Internet Service Provider)
An organization that provides access to the Internet. Small ISPs provide service
via modem and ISDN while the larger ones also offer private line hookups (T1,
fractional T1, etc.).
LAN (Local Area Network)
A communications network that serves users within a defined geographical area.
The benefits include the sharing of Internet access, files and equipment like
printers and storage devices. Special network cabling (10 Base-T) is often used to
connect the PCs together.
MAC Address (Media Access Control)
A MAC address is the hardware address of a device connected to a network.
NAT (Network Address Translation)
NAT masks a local network’s group of IP addresses from the external network,
allowing a local network of computers to share a single ISP account. This process
allows all of the computers on your home network to use one IP address. This will
enable access to the Internet from any computer on your home network without
having to purchase more IP addresses from your ISP.
ASUS WLAN Card
22
PCI-G31 WLAN Card User Manual
NIC (Network Interface Card)
A network adapter inserted into a computer so that the computer can be connected
to a network. It is responsible for converting data from stored in the computer to
the form transmitted or received.
Packet
A basic message unit for communication across a network. A packet usually
includes routing information, data, and sometimes error detection information.
Pass Phrase
The Wireless Settings utility uses an algorithm to generate four WEP keys based
on the typed combination.
PCMCIA (Personal Computer Memory Card International Association)
The Personal Computer Memory Card International Association (PCMCIA),
develops standards for PC cards, formerly known as PCMCIA cards. These cards
are available in three types, and are about the same length and width as credit
cards. However, the different width of the cards ranges in thickness from 3.3 mm
(Type I) to 5.0 mm (Type II) to 10.5 mm (Type III). These cards can be used for
various functions, including memory storage, land line modems and wireless
modems.
PPP (Point-to-Point Protocol)
PPP is a protocol for communication between computers using a serial interface,
typically a personal computer connected by phone line to a server.
PPPoE (Point-to-Point Protocol over Ethernet)
Point-to-Point Protocol is a method of secure data transmission. PPP using
Ethernet to connect to an ISP.
Preamble
Allows you to set the preamble mode for a network to Long, Short, or Auto. The
default preamble mode is Long.
23
ASUS WLAN Card
PCI-G31 WLAN Card User Manual
Radio Frequency (RF) Terms: GHz, MHz, Hz
The international unit for measuring frequency is Hertz (Hz), equivalent to the
older unit of cycles per second. One megahertz (MHz) is one million Hertz. One
gigahertz (GHz) is one billion Hertz. The standard US electrical power frequency is 60Hz, the AM
broadcast radio frequency band is 0.55-1.6MHz, the FM broadcast
radio frequency band is 88-108MHz, and wireless 802.11 LANs operate at 2.4GHz.
SSID (Service Set Identifier)
SSID is a group name shared by every member of a wireless network. Only client
PCs with the same SSID are allowed to establish a connection. Enabling the
Response to Broadcast SSID requests option allows the device to broadcast
its SSID in a wireless network. This allows other wireless devices to scan and
establish communication with the device. Unchecking this option hides the SSID to
prevent other wireless devices from recognizing and connecting to the device.
Station
Any device containing IEEE 802.11 wireless medium access conformity.
Subnet Mask
A subnet mask is a set of four numbers configured like an IP address. It is used to
create IP address numbers used only within a particular network.
TCP (Transmission Control Protocol)
The standard transport level protocol that provides the full duplex, stream service
on which many application protocols depend. TCP allows a process or one
machine to send a stream of data to a process on another. Software implementing
TCP usually resides in the operating system and uses the IP to transmit information
across the network.
WAN (Wide Area Network)
A system of LANs, connected together. A network that connects computers located
in separate areas, (i.e., different buildings, cities, countries). The Internet is a wide
area network.
WECA (Wireless Ethernet Compatibility Alliance)
An industry group that certifies cross-vender interoperability and compatibility of
IEEE 802.11b wireless networking prod WPA (Wi-Fi Protected Access)
ASUS WLAN Card
24
PCI-G31 WLAN Card User Manual
WPA (Wi-Fi Protected Access)
Wi-Fi Protected Access (WPA) is an improved security system for 802.11. It is part
of the 802.11i draft security standard. WPA encompasses TKIP (Temporal Key
Integrity Protocol) along with MIC (Message Integrity Check) and other fixes to
WEP such as Weak IV (Initialization Vector) filtering and Random IV generation.
TKIP uses 802.1x to deploy and change temporary keys as opposed to static
WEP keys once used in the past. It is a significant improvement over WEP. WPA
is part of a complete security solution. WPA also requires authentication servers in
enterprise security solutions.
Requirements
(1) A WPA compatible Access Point or Wireless router, (2) Operating system
updates that support WPA. In XP, an updated Windows Zero Config service is
needed. Users can download the Windows XP WPA patch here:
http://microsoft.com/downloads/details.aspx?FamilyId=009D8425-CE2B-47A4ABEC-274845DC9E91&displaylang=en
Please note that this patch requires the installation Windows XP Service Pack 1,
which is available here: http://www.microsoft.com/WindowsXP/pro/downloads/
servicepacks/sp1/default.asp
For earlier Windows Operating systems, a WPA capable supplicant is required
such as Funk Software’s Odyssey Client.
WLAN (Wireless Local Area Network)
This is a group of computers and other devices connected wirelessly in a small
area. A wireless network is referred to as LAN or WLAN.
25
ASUS WLAN Card
Manufacturer:
ASUSTeK Computer Inc.
Tel:
+886-2-2894-3447
Address: No. 150, LI-DE RD., PEITOU, TAIPEI 112,
TAIWAN
Authorised representative ASUS Computer GmbH
in Europe:
Address: HARKORT STR. 21-23, 40880 RATINGEN,
GERMANY
BOGAZICI BIL GISAYAR SAN. VE TIC. A.S.
Authorised distributors
in Turkey:
Tel:+90 212 3311000
Address: AYAZAGA MAH. KEMERBURGAZ CAD.
NO.10 AYAZAGA/ISTANBUL
INDEX BILGISAYAR SISTEMLERI MUHENDISLIK
SAN. VE TIC. A.S.
Tel:+90 212 3312121
Address: AYAZAGA MAH: CENDERE YOLU NO:9
AYAZAGA/ISTANBUL

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2011:01:26 11:09:11+08:00
Modify Date                     : 2011:01:26 11:09:11+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:6b91811b-a35f-4b49-92f3-cdb90fdaa735
Instance ID                     : uuid:df881d5b-6305-4606-89c7-94245aefc109
Page Count                      : 32

EXIF Metadata provided by EXIF.tools