ASUSTeK Computer PCEN13 Wireless PCI Express Card PCE-N13 User Manual PCIE N13 1030
ASUSTeK Computer Inc Wireless PCI Express Card PCE-N13 PCIE N13 1030
User Manual
1
Wireless MINI-PCI Products
PCE-N13 Quick Start Guide
Read this guide thoroughly and follow the installation and operation procedures
carefully to prevent any damage to the unit and/or any of the devices it connects to.
2
1. Welcome
Thank you for choosing Pegatron to serve your wireless needs. In no time you will enjoy
wireless home and office. We hope you will have as much fun using your PCE-N13 as we had
designing it.
Rest assured, your Pegatron PCE-N13 is built rock-solid to ensure maximum up-time for you
to stay up-and-running. If for any reason you have a problem, we stand behind our products,
so you can have peace-of-mind with your current and future Pegatron purchases.
We want you to be happy with your purchase, so we have made every effort to ensure product
quality, reliability, and ease-of-use.
Note:
Your order has been carefully packaged and inspected, and we hope you are pleased with the
Pegatron product you purchased. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact the person following.
2. Driver Installation Procedure
Driver Installation Steps
1、 Plug in the PCE-N13,right click my computer icon on the desktop and click the manager , then select the
device manager shown as below
3
2、You will find the network controller in the device manager , right click and select update the driver shown as
below
3、The driver install wizard as below , select install from the list (advanced) , click next to go on
4
4、Select search the most suitable driver from these locations and click brows to locate the driver , then next
5、Choose continue go on anyway
5
6、Click complete
7、Restart the computer
6
8、The last
7
3. Software installation and setup of device (channel/operating
mode/encryption/etc.)
Software Installation Steps
1. Plug in the PCE-N13, then power on the computer ,you will see the “welcome use the new hardware wizard”
when the OS loading complete ,please select “cancel”.
8
2. Open the file manager and select the software to install.
3. Click the “next step”
9
4. Select “install the driver and Ralink wireless configuration program”, and click the “next step”
5. Select “Ralink wireless configuration program”, and click the “next step”
10
6. Click the “install”
7. If pop the message ,Choose “continue go on anyway”
11
8. Wait few minute to complete the install ,and click the “complete”
9. Open the RaUI and click the arrow to show more information.
12
10. Click the re-scan first ,then find your AP and select it ,and click connect button ,the wireless card will be
connect to the AP.
11. If your AP have any encryption ,please input the password and click the OK
13
Federal Communication Commission Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
z Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
IC Statement
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required for successful communication"
14
This device has been designed to operate with an antenna having a maximum gain of 2.5 dBi. Antenna having a higher gain is
strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.