ASUSTeK Computer RT1P00 Wireless-N Router User Manual
ASUSTeK Computer Inc Wireless-N Router
User Manual
RT-N12+ B1
RT-N300 B1
Wireless-N Router
User Manual
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
Set up a Home Network – Router Mode
1. Connect your devices.
2. Launch the web browser and follow the QIS steps.
3. Set up is completed.
Extend your Wired Network – AP Mode
1. Connect your devices.
2. Launch the router GUI and choose AP mode.
Extend Wireless Network – Repeater Mode
1. Connect your devices.
2. Launch the router GUI and choose Repeater mode.
3. Select a wireless network and click to connect.