ASUSTeK Computer TF101 Eee Pad User Manual

ASUSTeK Computer Inc Eee Pad

Contents

User Manual

Eee Pad User ManualTF101E6422Notes for This ManualA few notes and warnings are used throughout this guide, allowing you to complete certain tasks safely and eectively. These notes have dierent degrees of importance as follows:WARNING! Important information that must be followed for safe operation.IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.TIP: Tips for completing tasks.NOTE:  Information for special situations.ASUS is devoted to creating environment-friendly products/packagings to safeguard comsumers’ health while minimizing the impact on the environment. The reduction of the number of the manual pages complies with the reduction of carbon emission.For the detailed user manual and related information, refer to the user manual included in the device or visit the ASUS Support Site at http://support.asus.com/
ASUS Eee Pad2There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands  (hand-held devices used on people or individual items). You can send your Eee Pad through airport X-ray machines. But do not send your Eee Pad through airport magnetic detectors or expose it to magnetic wands.Airplane PrecautionsAsk an airline personnel if you want to use your Eee Pad onboard an aircraft. Most airlines have restrictions for using electronic devices. Most airlines allow electronic use only between and not during takeos and landings.Charging Your BatteriesIf you intend to use battery power, be sure to fully charge your battery pack before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Eee Pad is in use.Remember to fully charge the battery (8 hours or more) before rst use and whenever it is depleted to prolong battery life. The battery reaches its maximum capacity after a few full charging and discharging cycles.
ASUS Eee Pad3Package ContentsIf any of the items is damaged or missing, contact your retailer.Eee Pad and Digitizer Pen Case (Optional)USB charger USB cableUser ManualUser Manual Warranty Card
ASUS Eee Pad4Your Eee Pad1Power buttonThe power button turns your Eee Pad on/o. Press and release the switch to turn on or wake the Eee Pad. Press and release it again to put the Eee Pad into sleep mode. If the system becomes unresponsive, Press and holding the power switch will force the Eee Pad to power o. Note that forcing the system to power o may result in data loss. Please inspect your data to ensure there is no data loss. It is strongly recommended that important data be backed up regularly.9134257810611
ASUS Eee Pad52Volume KeyPress this button to increase or decrease the system volume.3Rotation Lock keyTo lock the screen in the current orientation, slide this switch to the left. To unlock, slide this switch to the right.4SIM Card slot (on selected model)The SIM card compartment allows insertion of a mobile SIM card for 3G functions.5Built-in front CameraUse the built-in camera for picture taking, video recording, video conferencing, and other interactive applications.6Touch Screen PanelThe touch screen panel allows you to operate your Eee Pad using up to two ngers or with the included digitizer pen.7Power (DC) InputInsert the power adapter into this port to supply power to your Eee Pad and charge the internal battery pack. To prevent damage to your Eee Pad and battery pack, always use the bundled power adapter.8Built-in rear CameraUse the built-in camera for picture taking, video recording, video conferencing, and other interactive applications.9Headphone Output/Microphone Input Combo JackThe stereo combo jack (3.5mm) connects the Eee Pad’s audio out signal to amplied speakers or headphones. Using this jack automatically disables the built-in speaker.The jack is also designed to connect the microphone used for Skype, voice narrations, or simple audio recordings.
ASUS Eee Pad610mini HDMI portInsert a mini HDMI cable into this port to connect to a high-denition multimedia interface (HDMI) device.11Micro SD Card SlotInsert Micro SD card into this slot
ASUS Eee Pad7Charging the Eee Pad•   Use only the power adapter that comes with your device. Using a dierent power adapter may damage your device.•   The input voltage range between the wall outlet and this adapter is AC 100V–240V, and the output voltage of this adapter is 15V, 1.2A.To prolong battery life, fully charge the battery for up to 8 hours when using the Eee Pad for the rst time and whenever the battery power is fully depleted.
ASUS Eee Pad8Declarations and Safety StatementsFederal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to the following two conditions:•  This device may not cause harmful interference, and•  This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. •  Consult the dealer or an experienced radio/TV technician for help.The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception.  It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Oce of the Federal Register, National Archives and Records Administration, U.S. Government Printing Oce.)
ASUS Eee Pad9FCC Radio Frequency (RF) Exposure Caution StatementAny changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. “The manufacture declares that this device is limited to Channels 1 through 11 in the 2.4GHz frequency by specied rmware controlled in the USA.”This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specic operating instructions for satisfying RF exposure compliance. IC Radiation Exposure Statement for CanadaThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specic operating instructions for satisfying RF exposure compliance.Operation is subject to the following two conditions: •  This device may not cause interference and •  This device must accept any interference, including interference that  may cause undesired operation of the device.To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.Country Code selection feature to be disabled for products marketed to the US/CANADA.This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada
 FCC Regulations:  This  device complies with part 15 of the  FCC  Rules.  Operation  is  subject to  the following two conditions: (1) This device may not cause harmful interference, and (2) this  device  must  accept  any  interference  received,  including  interference  that  may cause undesired operation.  This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  protection  against  harmful  interference  in  a  residential  installation.  This equipment  generates,  uses  and  can  radiated  radio  frequency  energy  and,  if  not installed and used in accordance with the instructions, may cause harmful interference to  radio communications.  However, there is  no guarantee  that  interference  will  not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment  into an  outlet on a  circuit  different from  that to  which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for compliance could void the user‘s authority to operate the equipment.  The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
 4444RF Exposure Information (SAR)  This device meets the government’s requirements for exposure to radio waves. This  device  is  designed  and  manufactured  not  to  exceed  the  emission  limits  for exposure  to  radio  frequency  (RF)  energy  set  by  the  Federal  Communications Commission of the U.S. Government.      The  exposure  standard  employs  a  unit  of  measurement  known  as  the  Specific Absorption  Rate, or  SAR.    The  SAR  limit set  by the  FCC  is  1.6W/kg.    Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels.    The highest SAR value for the device as reported to the FCC is 0.387 W/kg when placed next to the body.      The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.    SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQTF101.  This device is  compliance with  SAR for  general population  /uncontrolled exposure limits  in  ANSI/IEEE  C95.1-1999  and  had  been  tested  in  accordance  with  the measurement methods and procedures specified in OET Bulletin 65 Supplement C.   IC Regulations:  This device complies with Industry Canada licence-exempt RSS standard(s).   Operation is subject to the following two conditions:   (1) this device may not cause interference, and   (2) this device must accept any interference, including interference that may cause undesired operation of the device.  This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  This  Category  II  radiocommunication  device  complies  with  Industry  Canada  Standard RSS-310.
 Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’Industrie Canada.  IMPORTANT NOTE:  IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified  in  IEEE  1528.  This  equipment  should  be  installed  and  operated  with  minimum distance 0cm between the radiator & your body.  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.  The County Code Selection feature is disabled for products marketed in the US/Canada.  For product available in the USA/ Canada markets, only channel 1~11 can be operated. Selection of other channels is not possible.
ASUS Eee Pad10Power Safety RequirementProducts with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.DO NOT throw the Eee Pad in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in  municipal waste. Check local regulations for disposal of electronic products.SAFE TEMP: This Eee Pad should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F).Risk of Explosion if Battery is Replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.CE Mark WarningCE marking for devices without wireless LAN/BluetoothThe shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.   CE marking for devices with wireless LAN/ BluetoothThis equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
ASUS Eee Pad11Copyright InformationNo part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or tranPadd into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).ASUS and Eee Pad logo are trademarks of ASUSTek Computer Inc. Information in this document is subject to change without notice.Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.Limitation of LiabilityCircumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
ASUS Eee Pad12Manufacturer ASUSTek COMPUTER INC.Address, City No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.CCountry TAIWANAuthorized Representative in EuropeASUS COMPUTER GmbHAddress, City HARKORT STR. 21-23, 40880 RATINGENCountry GERMANY

Navigation menu