ASUSTeK Computer WL138GV2 ASUS WLAN PCI CARD User Manual WL138g p65

ASUSTeK Computer Inc ASUS WLAN PCI CARD WL138g p65

USERS MANUAL

®User’s ManualWireless Local Area Network CardWL-138GV2(For 802.11g and 802.11b Wireless Networks)
2ASUS WLAN CardNo part of this manual, including the products and software described in it,may be reproduced, transmitted, transcribed, stored in a retrieval system, ortranslated into any language in any form or by any means, except documentationkept by the purchaser for backup purposes, without the express writtenpermission of ASUSTeK COMPUTER INC. (“ASUS”).ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OFANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOTLIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. INNO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEESOR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSSOF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA,INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISINGFROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.Product warranty or service will not be extended if: (1) the product is repaired,modified or altered, unless such repair, modification of alteration is authorizedin writing by ASUS; or (2) the serial number of the product is defaced ormissing.Products and corporate names appearing in this manual may or may not beregistered trademarks or copyrights of their respective companies, and are usedonly for identification or explanation and to the owners’ benefit, without intentto infringe.SPECIFICATIONS AND INFORMATION CONTAINED IN THISMANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, ANDARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, ANDSHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUSASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORSOR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Copyright © 2003 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright InformationProduct Name: ASUS WLAN Card (WL-138GV2)Manual Revision: 1 E1498Release Date: December 2003
ASUS WLAN Card 3Copyright InformationASUSTeK COMPUTER INC. (Asia-Pacific)Address 150 Li-Te Road, Peitou, Taipei, Taiwan 112Telephone +886-2-2894-3447Web site www.asus.com.twTechnical SupportTelephone (MB/Component) +886-2-2890-7121 (English)(Notebook) +886-2-2890-7122 (English)(Server/PC) +886-2-2890-7123 (English)(Networking) +886-2-2890-7902 (English)Support fax +886-2-2890-7698ASUS COMPUTER INTERNATIONAL (America)Address 44370 Nobel Drive, Fremont, CA 94538, USAFax +1-510-608-4555E-mail tmd1@asus.comWeb site usa.asus.comTechnical SupportTelephone (General) +1-502-995-0883(Notebook) +1-510-739-3777Support fax +1-502-933-8713Support e-mail tsd@asus.comASUS COMPUTER GmbH (Germany and Austria)Address Harkort Str. 25, D-40880 Ratingen, GermanyTelephone +49-2102-95990Fax +49-2102-959911Online contact www.asuscom.de/salesTechnical SupportTelephone +49-2102-95990Fax +49-2102-959911Online support www.asuscom.de/supportWeb site www.asuscom.de/newsASUS COMPUTER (Middle East and North Africa)Address P.O. Box 64133, Dubai, U.A.E.Telephone +9714-283-1774Fax +9714-283-1775Web site www.ASUSarabia.com
4ASUS WLAN CardTable of Contents1. Introduction ............................................................................. 7Overview .............................................................................................. 7The ASUS Wireless LAN Family..................................................... 8The ASUS WLAN™ Family .................................................................. 8System Requirements ........................................................................ 10The Product Package ......................................................................... 102. Installation ............................................................................. 11Installing the ASUS WLAN Card Driver .............................................. 11Verifying Drivers............................................................................ 12Installing the ASUS WLAN Card Utilities ............................................ 13ASUS WLAN Utility Quick Start .......................................................... 15Reading the ASUS WLAN Status Indicators................................. 16Orientating the Antenna ................................................................ 163. Software Reference .............................................................. 17Chapter Overview............................................................................... 17Windows XP Wireless Options ..................................................... 18Control Center Utility .......................................................................... 19Site Monitor Utility ......................................................................... 22Wireless Settings Utility ...................................................................... 24Status - Status Tab ....................................................................... 25Status - Connection Tab ............................................................... 29Status - IP Config Tab ................................................................... 30Config - Basic Tab......................................................................... 31Config - Encryption Tab ................................................................ 33Survey - Site Survey Tab .............................................................. 36About - Version Info Tab ............................................................... 37Link State ...................................................................................... 38Exit Wireless Settings ................................................................... 38Mobile Manager Utility ........................................................................ 39New Configuration Wizard ............................................................ 43Edit Configuration ......................................................................... 44Troubleshooting Utility ........................................................................ 52Windows XP Wireless Properties ....................................................... 564. Troubleshooting .................................................................... 58
ASUS WLAN Card 5Table of Contents5. Glossary................................................................................. 60IEEE 802.11b (11Mbits/sec) ............................................................... 65Direct-Sequence Spread Spectrum (for 802.11b) .............................. 66IEEE 802.11a (54Mbits/sec) ............................................................... 67COFDM (for 802.11a/g) ...................................................................... 686. Safety Information................................................................. 69Federal Communications Commission............................................... 69FCC Radio Frequency Interference Requirements ...................... 70FCC RF Exposure Guidelines (Access Points) ............................ 70FCC RF Exposure Guidelines (Wireless Cards)........................... 70Canadian Department of Communications ........................................ 71France Restricted Frequency Band.................................................... 72
6ASUS WLAN Card
ASUS WLAN Card 7Chapter 1 - IntroductionChapter 11. IntroductionOverviewThank you for purchasing the ASUS WLAN Card. The ASUS WLAN Card isa PCI compliant “wireless” network interface card (NIC) for any computerequipped with a PCI slot.The ASUS WLAN Card is designed to be fully compliant with both the IEEE802.11g and IEE802.11b wireless local area network (Wireless LAN) standards.As a result of the completion of the standard, the interoperability of WirelessLAN products among multiple manufacturers will be guaranteed. The ASUSWLAN Card product provides high-speed, standards-based Wireless LANsolutions.The ASUS WLAN Card is designed to be fully compliant with IEEE 802.11gwireless local area networks (WLAN). 802.11g is an extension to 802.11b,used in majority of wireless LANs today. 802.11g will broaden 802.11b's datarates to 54 Mbps within the 2.4 GHz band using OFDM (orthogonal frequencydivision multiplexing) technology. 802.11g allows backward compatibility with802.11b devices but only at 11 Mbps or lower depending on the range andpresence of obstructions.The ASUS WLAN Card supports data rates up to 11 Mbps, with automaticfallback to 5.5, 2, and 1 Mbps in 802.11b networks. It operates in the unlicensed2.4 GHz frequencies called the Instrumentation, Science, and Medical (ISM)band. Unlicensed means free of charge to users.The ASUS WLAN Card configuration utility is a user-friendly application thathelps you quickly setup multiple roaming nodes using the ASUS WLAN Card.You can even export the configuration settings to a file and import them toother computers for fast multiple installations using ASUS Mobile Manager.Wireless LANs are complementary extensions to existing wired LANs, offeringcomplete mobility while maintaining continuous network connectivity to bothcorporate and home Intranets. They add a new level of convenience for LANusers. PC users stay connected to the network anywhere throughout a buildingwithout being bound by a LAN wires. This is accomplished through the use ofASUS WLAN Access Points or ASUS WLAN Home Gateways. ASUS WLANHome Gateways with built-in Internet gateway capability, allows your familyto share a broadband Modem and one ISP account simultaneously from differentrooms without wires! ASUS WLAN products can keep you connectedanywhere, any time.Overview
8ASUS WLAN CardChapter 1 - IntroductionChapter 1WLAN FamilyThe ASUS Wireless LAN FamilyThe ASUS Wireless LAN family contains a complete solution for wirelesslocal area networks in the office or at home.For 802.11b Wireless NetworksThe above illustrations are not to scale.The ASUS WLAN802.11b USBClient (WL-140)is an IEEE 802.11bwireless USB LANadapter thatconnects to anycomputer’s USBport with thebenefit of beingable to place the antenna anywhere inorder to maximize signal strength.The ASUS WLAN802.11b CF Card(WL-110) is a IEEE802.11b wireless LANadapter that fits into aCompact Flash Type IIslot in a PortableDigital Assistant(PDA).The ASUS WLAN802.11b Access Point(WL-300) creates awireless network usingthe IEEE 802.11bwireless standard.The ASUSWLAN802.11bGateway(WL-500) creates a wireless networkusing the IEEE 802.11b wirelessstandard and allows sharing a singleInternet connection.The ASUS WLAN802.11b PC Card(WL-103b) is a IEEE802.11b wireless LANadapter that fits into aPCMCIA Type II slot ina Notebook PC. Thisnew version presents abetter looking design toreplace the WL-100.
ASUS WLAN Card 9Chapter 1 - IntroductionChapter 1WLAN FamilyThe above illustrations are not to scale.The ASUS WLAN 802.11b/a Router(WL-600) creates a wireless networkusing the IEEE 802.11b and 802.11awireless standards and allows sharinga single Internet connection.The ASUS WLAN802.11b/a CardbusCard (WL-200) is adual band (IEEE802.11a/b) wirelessLAN adapter that fitsinto a NotebookPC’s PCMCIA TypeII slot with Cardbussupport.The ASUS WLAN802.11b/a PCI Card(WL-230) is a dualband (IEEE 802.11a/b) wireless PCI cardthat also supportsBluetoothconnections.For 802.11b & 802.11a Wireless NetworksThe ASUS WLAN802.11g Access Point(WL-300g) creates awireless network usingthe IEEE 802.11g and802.11b wirelessstandards.For 802.11g & 802.11b Wireless NetworksThe ASUS WLAN802.11g PC Card(WL-103g) is a IEEE802.11g and 802.11bwireless LAN adapterthat fits into aPCMCIA Type II slotin a Notebook PC.This new versionpresents a betterlooking design toreplace the WL-100g.
10 ASUS WLAN CardChapter 1 - IntroductionChapter 1System RequirementsTo begin using the ASUS WLAN Card, you must have the followingminimum requirements:• Windows XP/2000/ME/98SE• Standard 32-bit PCI Slot• 32MB system memory or larger• 300MHz processor or higherThe Product PackageWhen you receive the ASUS WLAN Card package, it should contain thefollowing items:• ASUS WLAN PCI Card• ASUS WLAN Card Quick Start Guide• ASUS WLAN Card User’s Manual• CD-ROM Disc (Drivers, Utilities, Documentation)If any of the above items are not included or damaged, contact yourlocal dealer for instructions.Requirements
ASUS WLAN Card 11Chapter 2 - InstallationChapter 22. InstallationInstalling Driver3. Windows will automatically detect the ASUSWLAN Card once it is inserted into the PCIslot, then the “Add New Hardware Wizard”dialog will appear. Click Next.4. Insert the support CD that came with yourASUS WLAN Card.5. Select “Search for the best driver in”... and“Search removable media...”, then clickNext.Installing the ASUS WLAN Card Driver1. Have an experienced person install the ASUS WLAN Card into a free PCI slot. Replace yourchassis door, panels, screws, and cables when completed.2. Turn ON your computer and enter Windows.6. Wait while Windows XP creates a restorepoint for you system files in case youneed to restore your current system.7. Click Finish when installation hascomplete. Restart your computer ifprompted.
12 ASUS WLAN CardChapter 2 - InstallationChapter 2Installing DriverVerifying DriversYou can verify the ASUS WLAN Card driver in Device Manager. (AccessDevice Manager from Start | Control Panel | System | Hardware). A questionmark means that no driver has been installed. An exclamation mark over acard means that the driver is incorrect. Verify that you are using the correctproduct and driver CD. Try repeating the installation and contact customersupport if necessary.
ASUS WLAN Card 13Chapter 2 - InstallationChapter 2Installing UtilitiesInstalling the ASUS WLAN Card UtilitiesAfter you have installed the ASUS WLAN Card driver, you can install theWLAN Adapter utilities as shown below.3. Click Next on the Welcome screen. 4. Click Next after reading the Information.5. Click Next to use the default DestinationFolder or click Browse to select anotherfolder.6. Click Next to place icons in the defaultprogram folder or type another foldername.1. Insert the ASUS WLAN Card support CDand an autorun menu will appear. If yourautorun is disabled, double clickSETUP.EXE in the root directory of thesupport CD.2. From the autorun menu, select yourlanguage and click Install ASUS WLANCard Utilities.
14 ASUS WLAN CardChapter 2 - InstallationChapter 2Installing Utilities7. When Setup is complete, click Finish to exitthe installation wizard.Several shortcuts will be createdwhich can be accessed through Start.(“Classic Start menu” is shown here.)8. When the program is launched for the firsttime, you will be asked which function touse. Select to use ASUS utilities for morefunctions.By default, the “ASUS WLAN ControlCenter” is set to launch with Windows.If necessary, you can launch it manu-ally from the Windows Start Menu.Installing the ASUS WLAN Card Utilities(Cont.)
ASUS WLAN Card 15Chapter 2 - InstallationChapter 2Quick StartASUS WLAN Utility Quick StartAfter installing the ASUS WLAN driver and utility, you may need to makesome settings before being able to use your wireless connection.1. Right-click the ASUS WLAN icon and se-lect “Wireless Settings” 2. Set the Network Name (SSID) to the samename as the SSID set in your access point.3. Use “Site Survey” if you don’t know thename of your access point(s). 4. Encryption settings must also match thoseset in the access point. Talk with your net-work administrator if necessary.5. You can also see the connection quality onthe “Connection” page. Click OK to exit theutility.6. Click Apply to save your settings and checkthe “Status” page to see the “AssociationState”. It should show “Connected -xx:xx:xx:xx:xx:xx”.
16 ASUS WLAN CardChapter 2 - InstallationChapter 2Quick StartReading the ASUS WLAN Status IndicatorsThe ASUS WLAN card consists of one LED that indicates the status of theASUS WLAN Card.OFF: No wireless activity.Blinking: Transmitting or receiving wireless data.Orientating the AntennaThe ASUS WLAN Card has one external antenna. It is recommended that youadjust the external antenna straight up for maximum range and higher linkquality.
ASUS WLAN Card 17Chapter 3 - ReferenceChapter 3Software Reference•Control Center – Makes it easy to launch applications and activatenetwork location settings.•Live Update – Makes it easy to update your ASUS WLAN drivers orutilities automatically through the Internet.•Mobile Manager – A convenient tool to setup and manage networklocation settings.•Site Monitor – Measures the received signal strength indicator (RSSI)values of all wireless networks. This tool is used for determining thebest placement of Access Points to provide the most efficient coveragein a wireless network.•Troubleshooting - Troubleshooting will test your settings and connec-tion to try to pinpoint your problem and give you a solution.•Wireless Settings – Allows users to control the ASUS WLAN Card.Additional Reference•Windows XP Wireless Properties - Brief overview of the wirelesssettings provided in Windows XP.3. Software ReferenceChapter OverviewThe ASUS WLAN Card software includes six groups of utilitiesWindows Start Menu - Programs
18 ASUS WLAN CardChapter 3 - ReferenceChapter 3Software ReferenceWindows XP Wireless OptionsThe wireless options shown below is only available for Windows XP. Thefirst time you run the Control Center utility, it will automatically show.Select one of the radio buttons to decide which interface to use with yourASUS WLAN Card.Only use XP wireless function – Only use “Windows XP” wireless networksettings to configure the ASUS WLAN Card.Only use ASUS utilities and disable XP wireless function – Only use“ASUS WLAN Card utilities” to configure the ASUS WLAN Card.(recommended)You can return to the Wireless Option setting at any time by left clickingthe control center icon and choosing “Wireless Option”.Taskbar Left-Click Menu
ASUS WLAN Card 19Chapter 3 - ReferenceChapter 3Control CenterControl Center UtilityControl Center is an application that makes it easy to launch applicationsand activate network location settings. Control Center starts automaticallywhen the system boots. Whenever Control Center is running, you will seea Control Center icon displayed on the Windows taskbar.Starting the Control Center manually• Select ASUS WLAN Control Center in Windows Start menu.or• Double click the ASUS WLAN Control Center icon on the desktop.Using the Control Center TaskbarThe Control Center Taskbar menu display the following information:• The link quality of the ASUS WLAN Card (Excellent, Good, Fair,Poor, Not Linked)• Whether the ASUS WLAN Card is connected to the Internet (Blue:Connected, Gray: Not Connected)Taskbar Icon and StatusWindows Start Menu
20 ASUS WLAN CardChapter 3 - ReferenceChapter 3Control CenterWireless Status Icons (on the taskbar)Excellent link quality and connected to Internet (Infrastructure)Good link quality and connected to Internet (Infrastructure)Fair link quality and connected to Internet (Infrastructure)Poor link quality and connected to Internet (Infrastructure)Not linked but connected to Internet (Infrastructure)Excellent link quality but not connected to Internet (Infrastructure)Good link quality but not connected to Internet (Infrastructure)Fair link quality but not connected to Internet (Infrastructure)Poor link quality but not connected to Internet (Infrastructure)Not linked and not connected to Internet (Infrastructure)
ASUS WLAN Card 21Chapter 3 - ReferenceChapter 3Control CenterTaskbar Icon - Left MenuLeft-clicking the taskbar icon showsthe following menu:•Wireless Radio On – Turns thewireless radio ON.•Wireless Radio Off – Turns thewireless radio OFF.•Search & Connect – View theproperties of available AccessPoints within range.•Wireless Option (Windows XP only) – Sets your Windows XP wire-less networking environment.Taskbar Icon - Launch Wireless SettingsDouble-clicking the taskbar icon:• Launches the Wireless Settings application.Taskbar Left-Click MenuTaskbar Icon - Right MenuRight-clicking the taskbar icon showsthe following menu items:•Wireless Settings – LaunchesWireless Settings application.•Activate Configuration – Allowsyou to set which profile to use.•Mobile Manager – LaunchesMobile Manager application.•Preferences – Customizes theway the Control Center programbehaves. You can create a ControlCenter shortcut on the desktop.You can also set whether ControlCenter starts up with Windows.•Exit – Closes the Control Centerprogram.Right-Click Menu
22 ASUS WLAN CardChapter 3 - ReferenceChapter 3Site MonitorSite Monitor UtilitySite Monitor measures the receivedsignal strength indicator (RSSI)values of all available wirelessnetworks. This tool is used fordetermining the best placement ofAccess Points to provide the bestcoverage for a wireless network.Starting Site Monitor• Click the Windows Start button, select Programs | ASUS Utility |WLAN Card | Site Monitor.or• Right-click the Control Center icon on the Windows taskbar and thenclick Site Monitor.Main ScreenMeasures the signal values of all available wireless networks.Some Access Points can disable broadcasting SSID to hide them-selves from “Site Survey” or “Site Monitor” for added securitybut still allow you to join if you know their SSID.Your wireless LAN perfor-mance may be affected whenrunning the site monitor.Windows Start Menu
ASUS WLAN Card 23Chapter 3 - ReferenceChapter 3Site MonitorMonitorDirected link state test with one particular wireless network, including:RSSI: This indicates the value of received signal strength of the last receivedframe. In principle, the higher the RSSI, the better your communicationsquality.Throughput: This sends a specified number of data packets to the remotehost and calculates the average megabytes per second.During the test, the Start button toggles to Stop. You can click Start buttonto begin the link test and click Stop button at any time to terminate the test.
24 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsWireless Settings UtilityWireless Settings is an application that allows you to control your ASUSWLAN Card. Use Wireless Settings to View or Modify the configurationsettings and monitor the operational status of your PC Card. Once WirelessSettings is launched, you can see the tabbed property sheet. This propertysheet is composed of tabbed “pages”, each with its own group of feature-specific settings.Right-Click MenuIf you have more than one ASUS WLAN device, you will be given adevice selection window when you launch the “Wireless Settings”utility. Select the appropriate model if you face this situation.Starting Wireless Settings• Open the Windows Control Panel, and then double-click the ASUSWLAN Card Settings icon.or• Click the Windows Start button, select Programs | ASUS Utility |WLAN Card | Wireless Settings.or• Right-click the Control Center icon on the Windows taskbar, selectWireless Settings.Windows Start Menu
ASUS WLAN Card 25Chapter 3 - ReferenceChapter 3Windows SettingsStatus - Status TabYou can view the information about the ASUS WLAN Card from the generalmenu. These fields are blank if the ASUS WLAN Card does not exist.ConnectedScanningRadio DisabledYou can turn OFF the ASUS WLANCard by clicking the “Disable Radio”button.
26 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsAssociation StateDisplays the connection status as follows:Connected - The station is now associated with one wireless LAN device.When operating in Infrastructure mode, this field shows the MAC address ofthe Access Point with which you are communicating. When operating in AdHoc* mode, this field shows the virtual MAC address used by computersparticipating in the Ad Hoc* network.Scanning... - The station is now attempting to authenticate and associate withthe desired Access Point or Ad Hoc* node.Disconnected - The link is connected, but no beacon received.SSIDDisplays the Service Set Identifier (SSID) that the card is either associated orintending to join.MAC addressIndicates the hardware address of the card. MAC address is a unique identifierfor networking devices (typically written as twelve hexadecimal digits 0 through9 and A through F, six hexadecimal numbers separated by colons, i.e.00:E0:18:F0:05:C0).Current ChannelDisplays the radio channel that the card is currently tuned. This number changesas the radio scans the available channels.Current Data RateDisplays the current transmit data rate in megabits per second (Mbps).* See Chapter 5 - Glossary
ASUS WLAN Card 27Chapter 3 - ReferenceChapter 3Windows SettingsRadio StateShows the wireless radio on or off.Radio On - When the wireless radio is turned off, the following iconappears in the upper left of the Settings property page.Radio Off - When the wireless radio is turned on, the following iconappears in the upper left of the Settings property page.Rescan – Force the radio to rescan all available channels. If your link qualityor signal strength is poor, rescanning can be used to push the radio off aweak Access Point and search for a better link with another Access Point.This function will take some time to complete.Change SSID – Click on this to set the SSID.Search & Connect – Click on this to connect to an available network.Save as ProfileLater, when you make individual settings, you may want to use profiles tosave your settings. Profiles will help you combine all your settings forwork, home, roaming, and other locations so that you do not have to repeatindividual settings. When you travel from work to home, for example,choose a “home” profile that contains all your settings for home use. Whenyou travel back to work, choose an “office” profile.
28 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsActivate ConfigurationAuto roaming is enabled by default and will automatically switch to strongeraccess points. You can uncheck it if you have many access points and donot want to constantly switch to different networks. If you want to use aparticular profile. You can also check it here.Taskbar Right-Click
ASUS WLAN Card 29Chapter 3 - ReferenceChapter 3Windows SettingsStatus - Connection TabYou can view the current link statistics about the ASUS WLAN Card. Thesestatistics are updated once per second and are valid only if the ASUS WLANCard exists.Frame Sent/ReceivedTransmitted - The number of frames that were transmitted.Received - The number of frames that were received.Frame ErrorTransmitted - The number of frames that were not successfully transmitted.Received - The number of frames that were not successfully received.Connection QualitySignal Strength - Reflects the signal level related to the Access Point or AdHoc node the station is currently connected to. Ratings are: Excellent, Good,Fair, and Poor.Overall Connection QualityIt is derived from the current "Signal Strength". A graph displays a connectionquality range between 0 and 100 percent.Scanning Connected
30 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsStatus - IP Config TabIP Config tab shows all the current network configuration information forthe ASUS WLAN Card. Use it to verify your network settings.IP CONFIG will display all the current TCP/IP configuration valuesincluding the IP address, subnet mask, default gateway and WindowsInternet Naming Service (WINS) and DNS configuration.ButtonIP Release - Clicking this button will attempt to release the DHCP IP addressfor the ASUS WLAN Card in case you wish to remove your IP address.IP Renew - Clicking this button will attempt to renew the DHCP IP addressfor the ASUS WLAN Card in case you want to obtain a new IP address.NOTE: The IP Release and IP Renew buttons can only be used onthe ASUS WLAN Card that is configured with DHCP.
ASUS WLAN Card 31Chapter 3 - ReferenceChapter 3Windows SettingsConfig - Basic TabLets you can change the ASUS WLAN Card configurations without rebootingyour computer.Network TypeInfrastructure – Select the Infrastructure mode to establish a connection withan Access Point. Your computer is able to access wireless LAN and wiredLAN (Ethernet), via an associated access point. The Channel field turns to“Auto” when “Infrastructure” is selected.Ad Hoc – Select the “Ad Hoc” mode to communicate directly with each otherwithout using an Access Point. An “Ad Hoc” network is typically formed quicklyand easily without pre-planning. For example, share meeting notes betweennetworked computers in a meeting room.Network Name (SSID)Use the SSID field to configure the SSID for the ASUS WLAN Card. Youcan enter a new SSID or select one from the drop-down list box. SSID standsfor “Service Set Identifier”, which is a string used to identify a wireless LAN.You will only be able to connect Access Points which has the same SSID asthe one you set. Use different SSIDs to segment the wireless LAN and increasesecurity. SSIDs must all be printable characters and having a maximum of32 case sensitive characters, such as “ Wireless LAN”.Set the SSID to a null string, if you wish to allow your station toconnect to any Access Point it can find. But you cannot use nullstring in Ad Hoc mode.
32 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsClick Apply to save and activate the new configurations.ChannelUse the Channel field to select the radio channel for ASUS WLAN Card. In an"infrastructure" network, your ASUS WLAN Card will automatically selectthe correct frequency channel required to communicate with an Access Point,this parameter will be fixed in "Auto" and cannot be changed. In an "Ad Hoc"network, you can decide the channel number for the ASUS WLAN Card. AnyASUS WLAN Card can communicate in the same network if they have thesame frequency channel setting.The radio channels you may use depend on the regulations in your country. ForUnited States (FCC) and Canada (IC), channels 1 to 11 are supported. Data RateSelect the transmit data rate (fix or auto). The data rates supported for theASUS WLAN Cards are:Auto – The adapter will adjust to the most suitable transmission rate.Fix – 11g: Fix data rate to 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps.11b: Fix data rate to 1, 2, 5.5, or 11 megabits per second.OthersWEP – Click on this to show the "Encryption" tab.Advanced – Click on this to show the "Advanced" tab. In most cases, thedefault values do not have to be changed.Troubleshooting – Click on this to show the Troubleshooting utility.
ASUS WLAN Card 33Chapter 3 - ReferenceChapter 3Windows SettingsConfig - Encryption TabLets you configure the ASUS WLAN Card encryption settings. For dataconfidentiality in a wireless environment, IEEE 802.11 specifies a WiredEquivalent Privacy (WEP) algorithm to offer transmission privacy similar towired network. The WEP uses keys to encrypt transmit data packets and decryptreceived data packets. The encryption process can scramble frame bits to avoiddisclosure to others.Pull Down MenusData encryption (WEP enabled)This option allows you to enable or disable the Wired Equivalent Privacy (WEP)function. If this check box is selected, a WEP Key is used to encrypt your databefore it is transmitted over the air.If you enable WEP encryption, you will only be able to communicate withwireless devices that have use the same WEP keys.WEP KeyThis option is enable only if you enable WEP Encryption. The WEP Key is a64 bits (5 byte) or 128 bits (13 byte) Hexadecimal digits that is used to encrypttransmit data packets and decrypt received data packets.Key FormatYou can enter the WEP Key as a Hexadecimal digits (0~9, a~f, and A~F), or asASCII characters, based on the state of the Key Format.
34 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsKey LengthFor 64 bits encryption, each Key contains exactly 10 hex digits, or 5 ASCIIcharacters. For 128 bits encryption, each Key contains exactly 26 hex digits, or13 ASCII characters.Two ways to assign WEP keys1. Manual Assignment - When you click this button, the cursor appearsin the field for Key 1. For 64-bit encryption, you are required to enterfour WEP Keys. Each Key contains exactly 10 hex digits (0~9, a~f, andA~F). For 128-bit encryption, you are required to enter four WEP Keys.Each Key contains exactly 26 hex digits (0~9, a~f, and A~F).2. Automatic Generation - Type a combination of up to 64 letters, num-bers, or symbols in the Passphrase column, then the Wireless SettingsUtility uses an algorithm to generate four WEP Keys for encryption.NOTE: This function ease users from having to remember theirpasswords and is compatible to some existing WLAN utilities, butit is not very secure. "Manual Assignment" is more secure.Default KeyThe Default Key field lets you specify which of the four encryption keys youuse to transmit data on your wireless LAN. You can change the default key byclicking on the down arrow at the right of this field, selecting the number of thekey you want to use and then clicking the Apply button. As long as the AccessPoint or station with which you are communicating has the same key in thesame position, you can use any of the keys as the default.You then click the Apply button to create your encryption keys. After you clickthe Apply button, the Wireless Settings Utility uses asterisks to mask yourkeys.NOTE: Click the Apply or OK button to save the encryption set-tings. The keys you entered will be masked by asterisks.
ASUS WLAN Card 35Chapter 3 - ReferenceChapter 3Windows Settings64/128bits versus 40/104bitsYou may be confused about configuring WEP encryption, especially whenusing multiple wireless LAN products from different vendors. There aretwo levels of WEP Encryption: 64 bits and 128 bits.First, 64 bit WEP and 40 bit WEP are the same encryption method and caninteroperate in the wireless network. This lower level of WEP encryptionuses a 40 bit (10 Hex character) as a “secret key” (set by user), and a 24 bit“Initialization Vector” (not under user control). This together makes 64bits (40 + 24). Some vendors refer to this level of WEP as 40 bits andothers refer to this as 64 bits. ASUS WLAN products use the term 64 bitswhen referring to this lower level of encryption.Second, 104 bit WEP and 128 bit WEP are the same encryption methodand can interoperate in the wireless network. This higher level of WEPencryption uses a 104 bit (26 Hex character) as a “secret key” (set by user),and a 24 bit “Initialization Vector” (not under user control). This togethermakes 128 bits (104 + 24). Some vendors refer to this level of WEP as 104bits and others refer to this as 128 bits. ASUS WLAN products use theterm 128 bits when referring to this higher level of encryption.Click Apply to save and activate the new configurations.
36 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsSurvey - Site Survey TabUse the Site Survey tab to view statistics on the wireless networks availableto the ASUS WLAN Card. The Site Survey tab is read-only with no userconfigurable data fields. Use the Site Survey tab to view the followingnetwork parameters.•BSSID – View the IEEE MAC addresses of the available networks.•SSID – View the SSID (service set identification) within available networks.•CH – View the direct-sequence channel used by each network.•RSSI – Views the Received Signal Strength Indication (RSSI) in dB.•Type – View wireless network status information, the value is eitherAP (infrastructure) or STA (Ad Hoc).•WEP – View wireless network WEP encryption information, the valueis either OFF (disable encryption) or ON (enable encryption).ButtonsSearch – Scan all available wireless networks and show the scan result inthe “Available Network List”.Connect – To associate a network, select it from the “Available NetworkList” and click this button.Some Access Pointscan disable broadcast-ing SSID to hide them-selves from “Site Sur-vey” or “Site Monitor”for added security butstill allow you to join ifyou know their SSID.
ASUS WLAN Card 37Chapter 3 - ReferenceChapter 3Windows SettingsAbout - Version Info TabUses the Version Info tab to view program and ASUS WLAN Card versioninformation. The program version information field includes the Copyrightand utility version. The version information includes the ndis version, drivername, and driver version.This screen is an example only. Your versionnumbers will be different from what are shown here.
38 ASUS WLAN CardChapter 3 - ReferenceChapter 3Windows SettingsLink StateASUS WLAN Card “Link State” icon appears on theleft side of the ASUS WLAN Card Settings. Use theicon to view the current signal status.Exit Wireless SettingsTo exit Wireless Settings, you can click OK or Cancel.This utility may be closed at any time and from any tab.If you did not save the configuration settings, you willbe prompted to do so.Excellent Link Quality (Infrastructure)Good Link Quality (Infrastructure)Fair Link Quality (Infrastructure)Poor Link Quality (Infrastructure)Not linked (Infrastructure)Linked (Ad Hoc)Not Linked (Ad Hoc)
ASUS WLAN Card 39Chapter 3 - ReferenceChapter 3Mobile ManagerMobile Manager UtilityMobile Manager is a convenient tool tosetup and manage network locationsettings. Mobile Manager lets usersconfigure multiple alternativeconfigurations for different locations. Youonly need to set this once, and then easilyswitch configurations when you changeyour location.Starting Mobile Manager• Click the Windows Start button, select Programs | ASUS Utility |WLAN Card | Mobile Manager.or• Right-click the Control Center icon on the Windows taskbar and thenclick Mobile Manager.Using Mobile Manager - Quick Guide1. The first time you launch the Mobile Manager utility, it will automati-cally generate configurations that stores the current settings of all in-stalled network devices in your system.2. Change the name of the configuration to a descriptive name like “Work-Meeting Room” or “Home-ADSL”.3. On the File menu, click New Configuration, the New ConfigurationWizard dialog appears. Follow the on-screen instructions to create yourown location configurations.4. After you have created your configurations, you can see them in themain window.5. Select the configuration you want to use and then click Activate Con-figuration from the Activate pull-down menu. Your system will thenswitch to the network settings configured to your chosen selection.Windows Start Menu
40 ASUS WLAN CardChapter 3 - ReferenceChapter 3Mobile ManagerMain WindowYou can use the Mobile Manager utility main window to create a newconfiguration, edit a configuration or activate a configuration. The main windowincludes a menu bar, tool bar, and a list view for showing existing configurations.Using the pull-down menu and toolbarThe following topics show the commands available from the Mobile Managerpull-down menu and toolbar. If no configuration is selected, some commandswill be grayed out and inaccessible. The toolbar contains buttons for many ofthe most commonly used commands in Mobile Manager. It allows quick accessto some of the most useful features of Mobile Manager. The commands providedby the toolbar buttons are also available from the pull-down menu.File MenuNew Configuration - Select New Configuration in the File menuto open a New Configuration Wizard dialog. Use the New Configu-ration Wizard dialog to create a new configuration. See Using NewConfiguration Wizard for details on this command.Import Configuration - Load a configuration from an INI File.Export Configuration - Save the selected configuration (contain-ing Wireless Settings, TCP/IP Settings, Network Settings, ...) to anINI File. The INI file can be placed on a floppy diskette and thenimported by other computers using Mobile Manager. This can alsobe used as a backup feature for yourself.Exit - Close the Mobile Manager utility.
ASUS WLAN Card 41Chapter 3 - ReferenceChapter 3Mobile ManagerMobilize MenuAuto Roaming – If an association changes, it will automaticallyswitch into a network configuration that you have made. If no asso-ciations have been made, it will automatically connect to a wirelessnetwork based on configurations that you specify.Activate Configuration – Applies the configuration that you haveselected from the list. You may be prompted to restart Windowsdepending on the required changes. Follow the instructions on thescreen. Windows 2000 and XP usually do not require restarting yourcomputer, but Windows 98 and ME usually will require a restart.Edit MenuAll these commands are also available from the context menu that appearswhen you right-click with a configuration in the Mobile Manager window.Edit Configuration - Select Edit Configuration in the Edit menu toopen an Edit Configuration dialog to edit selected configurationitems. See “Using Edit Configuration” for details on this command.Rename - Change the name of the selected configuration.Copy - Duplicate the selected configuration.Delete - Discard the selected configuration.View MenuLarge Icons - Displays large icons for each configuration.Small Icons - Displays small icons for each configuration.List - Shows the configuration names in a list.Details - The Detailed view expands this list to include informationabout the configurations. The information includes configurationname, type, and description.
42 ASUS WLAN CardChapter 3 - ReferenceChapter 3Mobile ManagerHelp MenuContents - Displays the WinHelp contents window (the one youare reading now) for online Help.About Mobile Manager - Displays the version number and copy-right information for Mobile Manager. Click on the logo to connectto ASUS’ website.
ASUS WLAN Card 43Chapter 3 - ReferenceChapter 3Mobile ManagerNew Configuration WizardCreate a new configurationCreate a new configuration if you are in a specific location that does nothave an existing configuration defined. Use the New Configuration Wizardto create a configuration in a few easy steps.1. Do one of the following:• On the File menu, click New Configuration.or• Double-click New Configuration on the Main window.Then the New Configuration Wizard dialog starts.2. Choose the type of configuration that you want to create and click Next.•Wireless Local Area Network Configuration: You must have anASUS WLAN Card installed in your PC.•Wired Local Area Network Configuration: You must have a NIC (LANcard) (other than ASUS WLAN Card) installed in your PC.•Dialup Networking Configuration: You must have a modem in-stalled in your PC.
44 ASUS WLAN CardChapter 3 - ReferenceChapter 3Mobile Manager3. Enter the name and description you want to use for this configurationin the Name and description field. And Click Next.4. Follow the on-screen instructions, it will guide you through the processof specifying the settings in your configuration. The Wizard reads thecurrent system settings (TCP/IP, NT Domain, Proxy, File, and PrinterSharing) and displays it. Depending on the configuration that you havecreated, you can set the following groups of settings:• Wireless settings (for Wireless Configuration)• Network settings (for Wireless/Wired Configuration)• TCP/IP settings (for Wireless/Wired Configuration)• Dialing settings (for Dialup Configuration)• Dialup Networking settings (for Dialup Configuration)• Internet settings (for Wireless/Wired/Dialup Configuration)• Sharing settings (for Wireless/Wired/Dialup Configuration)See “Using Edit Configuration” for detailed information on each.5. Enter the appropriate information in the wizard. After specifying theappropriate information on each page, click Next to continue.6. On the final window of the New Configuration Wizard, you will see aFinish button.• If you do not want to use this new configuration now, click Finishto save the new configuration. It will be shown in the Mobile Man-ager main window.or• If you want to use this new configuration now, click Mobilize.Edit ConfigurationEdit an existing configurationEdit a configuration if you want to view or change dialup or LAN settings.• On the Edit menu, click Edit Configuration.or• Double-click one existing configuration on the Main window.Then the Edit Configuration dialog starts.The Edit Configuration dialog contains various settings, which you select byclicking the buttons at the left of the window. Each setting is described below.
ASUS WLAN Card 45Chapter 3 - ReferenceChapter 3Mobile ManagerGeneral settingsName – This field is mandatory, and used for indicating the locationfrom which you are dialing or connecting to the network. For example,if this is used for a meeting room at work, you can use a name like“Work-Meeting Room”. If it is used for home on your ADSL, you canname like “Home-ADSL”.Description – This field is optional, you can use it to provide moredetails about this configuration.Network settingsNetwork settings include: “Identification” and “Microsoft Networking”.IdentificationComputer name – Give your computer a unique name of up to 15characters. Thecomputer name is the name that others on your net-work will see your computer as. For complete compatibility, do not usespaces or symbols. It’s generally the same as the DNS hostname, forexample, “JohnDoe”.Workgroup – Type an existing workgroup name or create a newworkgroup by typing a new name that contains up to 15 characters. Useit to identify your computer group that you belong to.Computer Description – This information is displayed as a commentnext to the computer name when the computer is seen in “Details” view(select from the Windows pull-down menu). Use it to describe yourcomputer, for example, your name, or location.Microsoft NetworkingLogon validation – Specify how Windows 9x clients connect to a Win-dows NT Server Domain at this location.Check Log on to Windows NTdomain box if you are using a Windows NT Server in domain control-ler mode. And then enter the Window NT server domain name in Win-dow NT domain field.Network logon options – Specify how Windows 9x clients try to logon.Select Quick logon to wait until the shared network drives is actuallyused to attempt the login. Select Logon and restore network connectionsto logon to all shared network drives when the user logs into Windows.
46 ASUS WLAN CardChapter 3 - ReferenceChapter 3Mobile ManagerWireless settingsNetwork TypeInfrastructure – Select the Infrastructure mode to establish a connec-tion with an Access Point.Ad Hoc – Select the Ad Hoc mode to communicate directly with eachother without using an Access Point.SSIDUsing the SSID filed to configure the SSID setting for the ASUS WLANCard. SSID stands for Service Set Identifier, which is a string used to identifya wireless LAN. You will only be able to connect with an Access Point,which has the same SSID. Use different SSIDs to segment the wirelessLAN and add security.Note that the SSID must be all printable character string (case sensitivity)and up to 32 characters long, such as “ WIRELESS LAN”. Set the SSID toa null string, if you wish to allow your station to connect to any AccessPoint it can find. But you cannot use null string in Ad Hoc mode.ChannelThe radio channel used for transmit/receive data. In infrastructure network,your PC Card will automatically select the correct frequency channel requiredto communicate with an Access Point, this parameter will be fixed in “Auto”and can’t change it. In an Ad Hoc Network, you can decide channel number forthe PC Card to operate. PC Cards can communicate in the network if each hasthe same frequency channel setting.The radio channels you may use depend on the regulations in your country. ForUnited States (FCC) and Canada (IC), channels 1 to 11 are supported. WEPSelect enable or disable WEP encryption. Note that if you enable WEPencryption, you will only connect with wireless devices that have the sameWEP keys.
ASUS WLAN Card 47Chapter 3 - ReferenceChapter 3Mobile ManagerWEP KeyThis option is enable only if you enable WEP Encryption. The WEP Key is a64 bit (5 byte) or 128 bit (13 byte) Hexadecimal digit that is used to encrypttransmit data packets and decrypt received data packets. You have two ways toassign WEP keys:Automatic Generation - Type a combination of up to 127 letters,numbers, or symbols in the Magic Word column, then it will auto-matically generate WEP Keys.Manual Assignment - Manual type WEP keys which valid valuesinclude numbers, a~f, and A~F.Default KeyDetermines which entry in the default key table to use for transmitted packets.
48 ASUS WLAN CardChapter 3 - ReferenceChapter 3Mobile ManagerGatewaySpecify the gateways. There can be more than one specified.Set up theprimary gateway first.Add a gateway - Type the IP address of the gateway in the New Gate-way field and then click Add. The gateway you specified appears in theInstalled Gateways list. Repeat to specify another gateways. The valuein each field must be a number between 0 and 255. You can have up toeight IP addresses for gateways.Remove a gateway - Select the gateway from the Installed Gatewayslist and click Remove.DNSSelect Enable or Disable DNS. If you enable DNS, fill the followingparameters.Host – Enter the name of your computer. That is used to identifier thecomputer on the Internet. The hostname is generally the same as theMicrosoft networking computer name, for example, “S82000W”.Domain – Enter the TCP/IP domain name for your network.The fulldomain name consists of one or more names that are separated by dots,for example, “asus.com”.DNS Server Search Order – Specify the DNS Servers in the desiredorder to search for DNS information.Domain Suffix Search Order – Add any domain suffixes that may bevalid attached to the end of Internet domain name.WINSSpecify the WINS server. There can be more than one specified.Set up theprimary WINS server first.Disable WINS Resolution – Do not use WINS resolution.Enable WINS Resolution – Use WINS resolution. Specify the IP ad-dresses of the WINS servers in the desired search order. Scope ID isused when NetBIOS over TCP/IP is enabling on the workstations. Ifthis protocol has been enabled, then every workstation group must havethe same Scope ID for those computers to communicate within the group.The Scope ID is usually left blank.Use DHCP for WINS Resolution – If a DHCP server is available thatis configured to provide information on available WINS servers.
ASUS WLAN Card 49Chapter 3 - ReferenceChapter 3Mobile ManagerDialing settingsSpecify how the call will be dialed. This is useful if you want to change thecall to a calling card, use your computer from different locations, or add adial prefix, country code, or area code automatically.Dialup Networking settingsDialup Networking settings include four tabs: Device, Phone Number,Server Type, and TCP/IP.DeviceChoose the modem you want to use by Dial-Up Networking to connect toanother computer for this connection.Phone NumberSpecify area code, telephone number, and country code for this connection.Clear the Use area code and Dialing Properties checkbox, if you want toignore area code and dialing settings.Server TypeType of Dial-Up Server – Select the server type for this connection.Advanced optionsSelect Log on to network checkbox to specify that Dial-Up Networkingwill attempt to log on to the network you are connecting to, using the username and password you typed when you logged on to Windows.Select Enable software compression checkbox to specify whetherincoming or outgoing information is compressed before it is sent. This isuseful to speed up the transfer of information. Compression occurs only ifboth computers are using compatible compression.
50 ASUS WLAN CardChapter 3 - ReferenceChapter 3Mobile ManagerSelect Require encrypted password checkbox to specify that onlyencrypted passwords can be sent to or accepted by your computer. This isuseful if you need additional security for this connection. When type yourpassword while dialing out, this setting will encrypt your password but thetarget computer must support encrypted passwords for your password tobe understood.Allowed network protocols – Specifies the network protocols that yourcomputer can use.Select NetBEUI protocol to connect to Windows NT, Windows forWorkgroups, or LAN Manager servers.Select IPX/SPX Compatible protocol to connect to Netware and Win-dows NT servers and Windows 98 computers.Select TCP/IP protocol to connect to Internet and wide-area networks.TCP/IPServer assigned IP address – Specifies whether Dialup Networkingaccepts an IP address from a ppp server. If the ppp server does not offeran IP address, the IP address specified for TCP/IP Dial-Up Adapter inthe Network dialog box is used.Specify an IP address – Provides a space for you to type the preferredIP address for this connection. Dial-Up Networking tries to use thisaddress first.Server assigned name server addresses – Specifies whether Dial-UpNetworking accepts a DNS and WINS server addresses from a pppserver. If the ppp server does not offer DNS and WINS addresses, DNSand WINS server addresses specified for TCP/IP Dial-Up Adapter inthe Network dialog box are used.Specify name server addresses – Provides a space for you to type oneor two DNS and WINS server addresses for this connection only. Dial-Up Networking tries to use these addresses first.Use IP header compression – Specifies whether Dial-Up Networkinguses IP header compression for this connection. IP header compressionoptimizes data transfer between computers.Use default gateway on remote network – Specifies whether IP traf-fic is routed to the WAN connection by default.
ASUS WLAN Card 51Chapter 3 - ReferenceChapter 3Mobile ManagerInternet settingsA proxy server acts as a security barrier between your internal network(Intranet) and the Internet, keeping other people on the Internet from gainingaccess to confidential information on your internal network or yourcomputer.Disable Proxy Server – Do not use proxy server.Enable Proxy Server – Use the Proxy server to gain access to the Internet.Use the same proxy server for all protocols – Specifies whether youwant to use the same proxy server to gain access to the Internet usingall protocols.Servers – Provides spaces for you to type the address and port numberof the proxy server you want to use to gain access to the Internet overHTTP, Secure, FTP, Gopher, and Socks protocol.ExceptionsDo not use proxy server for address beginning with – Provides a spacefor you to type the Web addresses that do not need to be accessed throughthe proxy server. If you want to connect to a computer on your Intranet,make sure you type its address in this box. You can use wild cards to matchdomain and host names or addresses, for example, “*.company.com”,“192.72.111.*”.Bypass proxy server for local addresses – Specifies whether you want to usethe proxy server for all local (Intranet) addresses. You might be able to gainaccess to local addresses easier and faster if you do not use the proxy server.Sharing settingsI want to be able to give others access to my files – Turn file sharing ONor OFF. File sharing enables people using other computers to read or modifyfiles you share on your computer.I want to be able to allow others to print to my printer(s) – Turn printersharing ON or OFF. Printer sharing enables people using other computersto printer their files on your printers.Click Save button to save all the changes you have made without clos-ing the Edit Configuration dialog box.Click Cancel button to close the Edit Configuration dialog box withoutsaving any changes you have made.Click Close button to close the Edit Configuration dialog box and saveany changes that you have made.
52 ASUS WLAN CardChapter 3 - ReferenceChapter 3TroubleShootingTroubleshooting UtilityIf you have problems connecting to anaccess point, try the “TroubleShooting”utility.1. The first instruction is to “Check all the avail-able wireless networks”. For example you canrun “Site Survey”, “Site Monitor”, or ask yournetwork administrator for correct settings.Click the first box to scan all available wire-less networks.2. If you still cannot connect after completing thefirst instruction, click the first box to reveal asecond step.Depending on the utility’s detection of SSIDbroadcasts, you will have two possible sec-ond instruction.SSID broadcasts detected:“Check the SSID and WEP settings for your card.”SSID broadcasts not detected:“Configure your AP to allow Broadcast SSID toassociate.” or “Change your location by a fewfeet and try again.”The main point here is that your ASUSWLAN Card’s SSID and WEP securitysettings must match that of a nearbyaccess point. Move closer to the accesspoint if necessary.Windows Start Menu
ASUS WLAN Card 53Chapter 3 - ReferenceChapter 3TroubleShootingASUS WLAN CardNetwork Name (SSID) SettingASUS WLAN CardEncryption (security) SettingsASUS WLAN Access PointEncryption (security) SettingsMake sure these are set the same asthe access point.ASUS WLAN Access PointNetwork Name (SSID) SettingMake sure that the SSID are the same.SSID Broadcasting on the AccessPoint is not necessary and may bedisabled for increased security. Youmay enable SSID Broadcasting duringtroubleshooting if necessary.
54 ASUS WLAN CardChapter 3 - ReferenceChapter 3TroubleShooting3. If you still cannot connect after completing thesecond instruction, click the second box to re-veal a second step.Depending on the utility’s detection of SSIDbroadcasts, you will have two possible secondinstruction.SSID broadcasts detected:“Consult your LAN administrator whether theMAC address of your Card is added in the APsAuthorization table.”SSID broadcasts not detected:“Change your settings and try again.”The main point here is that your ASUS WLAN Card’s MAC address must beallowed and not prohibited from joining the access point. Clicking the last boxwill send you to the Wireless Settings utility.ASUS WLAN CardAuthorization (MAC Address) SettingsASUS WLAN Access PointAuthorization (MAC Address) SettingsYour MAC address is shown here.Make sure it is included in the accesspoint Authorization Table if it isenabled. Some Authorization Tablehas an option to “exclude” or“prohibit” certain MAC address fromjoining. In this case, make sure yourMAC address is not among them.
ASUS WLAN Card 55Chapter 3 - ReferenceChapter 3TroubleShooting4. After configuration is successful, you will geta current status of: “You have a connectionwith an Access Point.” You can close theTroubleShooting utility and begin using yourwireless network.
56 ASUS WLAN CardChapter 3 - ReferenceChapter 3Wireless PropertiesWindows XP Wireless Properties2. Double-click ASUS WLAN ...1. Double-click System icon in the Control Panel.3. The “General” page will show status, dura-tion, speed, and signal strength. Signalstrength is represented by green bars with5 bars meaning excellent signal and 1 barmeaning poor signal.4. The “Wireless Networks” page will showAvailable networks and Preferred networks.Use the Add button to add the “SSID” ofavailable networks and set the connectionpreference order with the Move up andMove down buttons. The radio tower witha signal icon identifies the currently con-nected access point.
ASUS WLAN Card 57Chapter 3 - ReferenceChapter 3Wireless Properties5. The “Authentication” page allows you to addsecurity settings. Read Windows help formore information.6. The “Advanced” page allows you to set fire-wall and sharing. Read Windows help formore information.Windows XP Wireless Properties (Cont.)
58 ASUS WLAN CardChapter 4 - TroubleshootingChapter 4Troubleshooting4. TroubleshootingThe following troubleshooting guides provide answers to some of the morecommon problems, which you may encounter while installing or usingASUS WLAN Card products. If you encounter difficulties that are notmentioned in this section, please contact ASUS Wireless LAN TechnicalSupport.Verify if the ASUS WLAN Card is installed correctly.When the ASUS WLAN Card setup is complete, you can verify if the driverhas been setup properly. Right click My Computer, select Properties, andclick the Device Manager tab. Then double-click the Network adaptersicon; you should see “ASUS 802.11g Network Adapter” with an icon ofan expansion card. There should not be a “!” or “?” (problem) or “x”(disabled) symbol over this icon.There is a yellow exclamation mark or a yellow question markin Device Manager in front of my ASUS WLAN Card.To resolve the problem, you should update/reinstall the ASUS WLAN Carddriver. In “Device Manager”, right click ASUS 802.11g Network Adapter,select Properties, and select Driver tab. Click on Update Driver button,then follow the “Update Device Driver Wizard” to complete the driverinstallation.In addition, you may be able to resolve this issue by reinstalling the driver.Choose ASUS 802.11g Network Adapter, click Remove button in “DeviceManager”, and then run the Add New Hardware Wizard from the ControlPanel.Cannot connect to any Access PointsFollow the procedure below to configure your ASUS WLAN Card.a. Verify that the “Network Type” is in “Infrastructure” mode.b. Verify that the “SSID” of your ASUS WLAN Card is set to the same“SSID” of an Access Point.c. Verify that the “Encryption” type is the same as that of an Access Point.If you enabled “WEP” encryption, you must also set the same WEPKeys on both sides.
ASUS WLAN Card 59Chapter 4 - TroubleshootingChapter 4TroubleshootingCannot connect to a Station (ASUS WLAN Card)Follow the procedure below to configure your ASUS WLAN Card.a. Verify that the “Network Type” is in “Ad Hoc” mode.b. Verify that the “SSID” of your ASUS WLAN Card is set to the same“SSID” of the other station (or another ASUS WLAN Card).c. Verify that the “channel” of the ASUS WLAN Card is “Auto” or set tothe same “channel” of the other station (or another ASUS WLAN Card).d. Verify that the “Encryption” type is the same as the other station (oranother ASUS WLAN Card). If “WEP” encryption is enabled, youmust set the same “WEP” Keys on both stations.Bad link quality or bad signal strengthThere are two possible reasons. First is radio interference, keep the environmentaround the ASUS WLAN Card away from microwave ovens and large metalobjects. Then try to reorient the ASUS WLAN Card antenna. Second is thedistance, decrease the distance between your ASUS WLAN Card and the AccessPoint or station (or another ASUS WLAN Card).The TCP/IP protocol did not bind to the ASUS WLAN PC Card.This will occur when the computer already has six TCP/IP bindings in Windows98 or ten bindings in Windows Me. These limits are imposed by the Microsoftoperating system.Solution: If your computer already has the maximum number of TCP/IPbindings, remove one of the network adapters from the Network configurationbefore installing the ASUS WLAN Card driver.
60 ASUS WLAN CardChapter 5Chapter 5 - GlossaryGlossary5. GlossaryAccess Point (AP)An networking device that seamlessly connects wired and wireless networks.Access Points combined with a distributed system support the creation ofmultiple radio cells that enable roaming throughout a facility.Ad HocA wireless network composed solely of stations within mutual communicationrange of each other (no Access Point).Basic Service Area (BSS)A set of stations controlled by a single coordination function.ChannelAn instance of medium use for the purpose of passing protocol data units thatmay be used simultaneously, in the same volume of space, with other instancesof medium use (on other channels) by other instances of the same physicallayer, with an acceptably low frame error ratio due to mutual interference.COFDMSee next few pages for detailed explanation.DNS Server Address (Domain Name System)DNS allows Internet host computers to have a domain name and one or moreIP addresses. A DNS server keeps a database of host computers and theirrespective domain names and IP addresses, so that when a user enters a domainname into the Internet browser, the user is sent to the proper IP address. TheDNS server address used by the computers on your home network is the locationof the DNS server your ISP has assigned.DSL Modem (Digital Subscriber Line)A DSL modem uses your existing phone lines to transmit data at high speeds.Direct-Sequence Spread SpectrumSee next few pages for detailed explanation.EncryptionThis provides wireless data transmissions with a level of security.
ASUS WLAN Card 61Chapter 5Chapter 5 - GlossaryGlossaryDirect-Sequence Spread SpectrumSee next few pages for detailed explanation.Extended Service Set (ESS)A set of one or more interconnected basic service set (BSSs) and integratedlocal area networks (LANs) can be configured as an Extended Service Set.EthernetThe most widely used LAN access method, which is defined by the IEEE802.3 standard. Ethernet is normally a shared media LAN meaning all deviceson the network segment share total bandwidth. Ethernet networks operate at10Mbps using CSMA/CD to run over 10-BaseT cables.GatewayA network component that acts as an entrance to another network.IEEE 802.11IEEE 802.xx is a set of specifications for LANs from the Institute of Electricaland Electronic Engineers (IEEE). Most wired networks conform to 802.3, thespecification for CSMA/CD based Ethernet networks or 802.5, the specificationfor token ring networks. 802.11 defines the standard for wireless LANsencompassing three incompatible (non-interoperable) technologies: FrequencyHopping Spread Spectrum (FHSS), Direct Sequence Spread Spectrum (DSSS),and Infrared. 802.11 specifies a carrier sense media access control and physicallayer specifications for 1 and 2 Mbps wireless LANs.IEEE 802.11b802.11b specifies a carrier sense media access control and physical layerspecifications for 5.5 and 11 Mbps wireless LANs.IEEE 802.11g802.11g is an extension to 802.11b, used in majority of wireless LANs today.802.11g will broaden 802.11b's data rates to 54 Mbps within the 2.4 GHz bandusing OFDM (orthogonal frequency division multiplexing) technology. 802.11gallows backward compatibility with 802.11b devices but only at 11 Mbps orlower depending on the range and presence of obstructions.InfrastructureA wireless network centered about an access point. In this environment, theaccess point not only provides communication with the wired network but alsomediates wireless network traffic in the immediate neighborhood.
62 ASUS WLAN CardChapter 5Chapter 5 - GlossaryGlossaryIP (Internet Protocol)The TCP/IP standard protocol that defines the IP datagram as the unit ofinformation passed across an Internet and provides the basis for connectionlesspacket delivery service. IP includes the ICMP control and error message protocolas an integral part. It provides the functional equivalent of ISO OSI NetworkServices.IP AddressAn IP address is a 32-bit number that identifies each sender or receiver ofinformation that is sent across the Internet. An IP address has two parts: theidentifier of a particular network on the Internet and an identifier of the particulardevice (which can be a server or a workstation) within that network.ISM Bands (Industrial, Scientific, and Medicine Bands)Radio frequency bands that the Federal Communications Commission (FCC)authorized for wireless LANs. The ISM bands are located at 902 MHz, 2.400GHz, and 5.7 GHz.ISP (Internet Service Provider)An organization that provides access to the Internet. Small ISPs provide servicevia modem and ISDN while the larger ones also offer private line hookups(T1, fractional T1, etc.).LAN (Local Area Network)A communications network that serves users within a defined geographicalarea. The benefits include the sharing of Internet access, files and equipmentlike printers and storage devices. Special network cabling (10 Base-T) is oftenused to connect the PCs together.NIC (Network Interface Card)A network adapter inserted into a computer so that the computer can beconnected to a network. It is responsible for converting data from stored in thecomputer to the form transmitted or received.PacketA basic message unit for communication across a network. A packet usuallyincludes routing information, data, and sometimes error detection information.PCI (Personal Computer Memory Card International Association)The Personal Computer Memory Card International Association (PCI), develops
ASUS WLAN Card 63Chapter 5Chapter 5 - GlossaryGlossarystandards for PC cards, formerly known as PCI cards. These cards are availablein three types, and are about the same length and width as credit cards. However,the different width of the cards ranges in thickness from 3.3 mm (Type I) to 5.0mm (Type II) to 10.5 mm (Type III). These cards can be used for variousfunctions, including memory storage, landline modems and wireless modems.PPP (Point-to-Point Protocol)PPP is a protocol for communication between computers using a serial interface,typically a personal computer connected by phone line to a server.PPPoE (Point-to-Point Protocol over Ethernet)Point-to-Point Protocol is a method of secure data transmission. PPP usingEthernet to connect to an ISP.Radio Frequency (RF) Terms: GHz, MHz, HzThe international unit for measuring frequency is Hertz (Hz), equivalent to theolder unit of cycles per second. One megahertz (MHz) is one million Hertz.One gigahertz (GHz) is one billion Hertz. The standard US electrical powerfrequency is 60 Hz, the AM broadcast radio frequency band is 0.55-1.6 MHz,the FM broadcast radio frequency band is 88-108 MHz, and wireless 802.11LANs operate at 2.4 GHz.SSID (Service Set ID)SSID is a group name shared by every member of a wireless network. Onlyclient PCs with the same SSID are allowed to establish a connection.StationAny device containing IEEE 802.11 wireless medium access conformity.Subnet MaskA subnet mask is a set of four numbers configured like an IP address. It is usedto create IP address numbers used only within a particular network.TCP (Transmission Control Protocol)The standard transport level protocol that provides the full duplex, stream serviceon which many application protocols depend. TCP allows a process or onemachine to send a stream of data to a process on another. Software implementingTCP usually resides in the operating system and uses the IP to transmitinformation across the network.
64 ASUS WLAN CardChapter 5Chapter 5 - GlossaryGlossaryWAN (Wide Area Network)A system of LANs, connected together. A network that connects computerslocated in separate areas, (i.e., different buildings, cities, countries). The Internetis a wide area network.WECA (Wireless Ethernet Compatibility Alliance)An industry group that certifies cross-vender interoperability and compatibilityof IEEE 802.11b wireless networking products and to promote that standardfor enterprise, small business, and home environments.WLAN (Wireless Local Area Network)This is a group of computers and other devices connected wirelessly in a smallarea. A wireless network is referred to as LAN or WLAN.
ASUS WLAN Card 65Chapter 5Chapter 5 - GlossaryGlossaryIEEE 802.11b (11Mbits/sec)In 1997, the Institute of Electrical and Electronics Engineers (IEEE) adoptedthe 802.11 standard for wireless devices operating in the 2.4 GHz frequencyband. This standard includes provisions for three radio technologies: directsequence spread spectrum, frequency hopping spread spectrum, and infrared.Devices that comply with the 802.11 standard operate at a data rate of either 1or 2 Mbps.In 1999, the IEEE created the 802.11b standard. 802.11b is essentially identicalto the 802.11 standard except 802.11b provides for data rates of up to 11 Mbpsfor direct sequence spread spectrum devices. Under 802.11b, direct sequencedevices can operate at 11 Mbps, 5.5 Mbps, 2 Mbps, or 1 Mbps. This providesinteroperability with existing 802.11 direct sequence devices that operate onlyat 2 Mbps.Direct sequence spread spectrum devices spread a radio signal over a range offrequencies. The IEEE 802.11b specification allocates the 2.4 GHz frequencyband into 14 overlapping operating Channels. Each Channel corresponds to adifferent set of frequencies. See the Appendix to determine the center frequencyused by each Channel.If operating multiple 802.11b Wireless ASUS WLAN Cards in the same vicinity,the distance between the center frequencies must be at least 25 MHz to avoidinterference. Note that the Channels available to an 802.11b Wireless ASUSWLAN Card will vary from country to country. In the United States, the 802.11bstandard allocates 11 operating Channels for direct sequence devices. Channels1, 6, and 11 are independent and do not overlap with each other. To avoidinterference between 802.11b Wireless ASUS WLAN Cards, It is recommendedthat you configure the Wireless ASUS WLAN Cards using only Channels 1, 6,and 11.
66 ASUS WLAN CardChapter 5Chapter 5 - GlossaryGlossaryDirect-Sequence Spread Spectrum (for 802.11b)Spread spectrum (broadband) uses a narrowband signal to spread thetransmission over a segment of the radio frequency band or spectrum. Direct-sequence is a spread spectrum technique where the transmitted signal is spreadover a particular frequency range. The Space Link Wireless ASUS WLANCard uses Direct-Sequence Spread Spectrum (DSSS) for radio communication.Direct-sequence systems communicate by continuously transmitting a redundantpattern of bits called a chipping sequence. Each bit of transmitted data is mappedinto chips by the Wireless ASUS WLAN Card and rearranged into apseudorandom spreading code to form the chipping sequence. The chippingsequence is combined with a transmitted data stream to produce the WirelessASUS WLAN Card output signal.Wireless mobile clients receiving a direct-sequence transmission use thespreading code to map the chips within the chipping sequence back into bits torecreate the original data transmitted by the Wireless ASUS WLAN Card.Intercepting and decoding a direct-sequence transmission requires a predefinedalgorithm to associate the spreading code used by the transmitting WirelessASUS WLAN Card to the receiving wireless mobile client.This algorithm is established by IEEE 802.11b specifications. The bitredundancy within the chipping sequence enables the receiving wireless mobileclient to recreate the original data pattern, even if bits in the chipping sequenceare corrupted by interference. The ratio of chips per bit is called the spreadingratio. A high spreading ratio increases the resistance of the signal to interference.A low spreading ratio increases the bandwidth available to the user. The WirelessASUS WLAN Card uses a constant chip rate of 11Mchips/s for all data rates,but uses different modulation schemes to encode more bits per chip at thehigher data rates. The Wireless ASUS WLAN Card is capable of an 11 Mbpsdata transmission rate, but the coverage area is less than a 1 or 2 Mbps WirelessASUS WLAN Card since coverage area decreases as bandwidth increases.
ASUS WLAN Card 67Chapter 5Chapter 5 - GlossaryGlossaryIEEE 802.11a (54Mbits/sec)The 802.11b standard was designed to operate in the 2.4-GHz ISM (Industrial,Scientific and Medical) band using direct-sequence spread-spectrum technology.The 802.11a standard, on the other hand, was designed to operate in the morerecently allocated 5-GHz UNII (Unlicensed National Information Infrastructure)band. And unlike 802.11b, the 802.11a standard departs from the traditionalspread-spectrum technology, instead using a frequency division multiplexingscheme that's intended to be friendlier to office environments.The 802.11a standard, which supports data rates of up to 54 Mbps, is the FastEthernet analog to 802.11b, which supports data rates of up to 11 Mbps. LikeEthernet and Fast Ethernet, 802.11b and 802.11a use an identical MAC (MediaAccess Control). However, while Fast Ethernet uses the same physical-layerencoding scheme as Ethernet (only faster), 802.11a uses an entirely differentencoding scheme, called OFDM (orthogonal frequency division multiplexing).The 802.11b spectrum is plagued by saturation from wireless phones, microwaveovens and other emerging wireless technologies, such as Bluetooth. In contrast,802.11a spectrum is relatively free of interference.The 802.11a standard gains some of its performance from the higher frequenciesat which it operates. The laws of information theory tie frequency, radiatedpower and distance together in an inverse relationship. Thus, moving up to the5-GHz spectrum from 2.4 GHz will lead to shorter distances, given the sameradiated power and encoding scheme.
68 ASUS WLAN CardChapter 5Chapter 5 - GlossaryGlossaryCOFDM (for 802.11a/g)Signal power alone is not enough to maintain 802.11b-like distances in an802.11a/g environment. To compensate, a new physical-layer encodingtechnology was designed that departs from the traditional direct-sequencetechnology being deployed today. This technology is called COFDM (codedOFDM). COFDM was developed specifically for indoor wireless use and offersperformance much superior to that of spread-spectrum solutions. COFDMworks by breaking one high-speed data carrier into several lower-speedsubcarriers, which are then transmitted in parallel. Each high-speed carrier is20 MHz wide and is broken up into 52 subchannels, each approximately 300KHz wide. COFDM uses 48 of these subchannels for data, while the remainingfour are used for error correction. COFDM delivers higher data rates and ahigh degree of multipath reflection recovery, thanks to its encoding schemeand error correction.Each subchannel in the COFDM implementation is about 300 KHz wide. Atthe low end of the speed gradient, BPSK (binary phase shift keying) is used toencode 125 Kbps of data per channel, resulting in a 6,000-Kbps, or 6 Mbps,data rate. Using quadrature phase shift keying, you can double the amount ofdata encoded to 250 Kbps per channel, yielding a 12-Mbps data rate. And byusing 16-level quadrature amplitude modulation encoding 4 bits per hertz, youcan achieve a data rate of 24 Mbps. The 802.11a/g standard specifies that all802.11a/g-compliant products must support these basic data rates. The standardalso lets the vendor extend the modulation scheme beyond 24 Mbps. Remember,the more bits per cycle (hertz) that are encoded, the more susceptible the signalwill be to interference and fading, and ultimately, the shorter the range, unlesspower output is increased.Note: This ASUS WLAN device only supports 802.11g and 802.11b.802.11a is supported in other ASUS WLAN products.
ASUS WLAN Card 69Chapter 6 - AppendixChapter 6Appendix6. Safety InformationFederal Communications CommissionThis device complies with FCC Rules Part 15. Operation is subject to thefollowing two conditions:• This device may not cause harmful interference, and• This device must accept any interference received, including interfer-ence that may cause undesired operation.This equipment has been tested and found to comply with the limits for a classB digital device, pursuant to Part 15 of the Federal CommunicationsCommission (FCC) rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.WARNING! The use of a shielded-type power cord is required inorder to meet FCC emission limits and to prevent interference tothe nearby radio and television reception. It is essential that onlythe supplied power cord be used. Use only shielded cables to con-nect I/O devices to this equipment. You are cautioned that changesor modifications not expressly approved by the party responsiblefor compliance could void your authority to operate the equipment.Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.Washington DC: Office of the Federal Register, National Archives and RecordsAdministration, U.S. Government Printing Office.
70 ASUS WLAN CardChapter 6 - AppendixChapter 6AppendixFCC RF Exposure Guidelines (Access Points)This Wireless LAN radio device has been evaluated under FCC Bulletin OET65C and found compliant to the requirements as set forth in CFR 47 Sections2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequencydevices. The radiation output power of this Wireless LAN device is far belowthe FCC radio frequency exposure limits. Nevertheless, this device shall beused in such a manner that the potential for human contact during normaloperation – as a mobile or portable device but use in a body-worn way isstrictly prohibit. When using this device, a certain separation distance betweenantenna and nearby persons has to be kept to ensure RF exposure compliance.In order to comply with the RF exposure limits established in the ANSI C95.1standards, Access Point equipment should be installed and operated withminimum distance [20cm] between the radiator and your body. Use only withsupplied antenna. Unauthorized antenna, modification, or attachments coulddamage the transmitter and may violate FCC regulations.CAUTION: Any changes or modifications not expressly approvedin this manual could void your authorization to use this device.
ASUS WLAN Card 71Chapter 6 - AppendixChapter 6AppendixCanadian Department of CommunicationsThis digital apparatus does not exceed the Class B limits for radio noise emissionsfrom digital apparatus set out in the Radio Interference Regulations of the CanadianDepartment of Communications.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la normeNMB-003 du Canada.
72 ASUS WLAN CardChapter 6 - AppendixChapter 6AppendixFrance Restricted Frequency BandSome areas of France have a restricted frequency band. The worst casemaximum authorized power indoors is:• 100mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)In the departments listed below, for the entire 2.4 GHz band:• Maximum authorized power indoors is 100mWDepartments in which the use of the 2400–2483.5 MHz band is permitted withan EIRP of less than 100mW indoors .01 Ain Orientales 36 Indre 66 Pyrénées02 Aisne 37 Indre et Loire 67 Bas Rhin03 Allier 41 Loir et Cher 68 Haut Rhin05 Hautes Alpes 42 Loire 70 Haute Saône08 Ardennes 45 Loiret 71 Saône et Loire09 Ariège 50 Manche 75 Paris11 Aude 55 Meuse 82 Tarn et Garonne12 Aveyron 58 Nièvre 84 Vaucluse16 Charente 59 Nord 88 Vosges24 Dordogne 60 Oise 89 Yonne25 Doubs 61 Orne 90 Territoire de Belfort26 Drôme 63 Puy du Dôme 94 Val de Marne32 Gers 64 Pyrénées AtlantiqueThis requirement is likely to change over time, allowing you to use your wirelessLAN card in more areas within France. Please check with ART for the latestinformation (www.art-telecom.fr)NOTE: Your ASUS WLAN Card transmits less than 100mW, but morethan 10mW.

Navigation menu