ASUSTeK Computer WL159G USB2.0 WLAN SLIM MODULE User Manual USERS MANUAL

ASUSTeK Computer Inc USB2.0 WLAN SLIM MODULE USERS MANUAL

USERS MANUAL

1 User’s Manual ASUS WL-159G USB2.0 WLAN Slim Module Version1.1 2004/11/04
2Contents Notice ............................................................................................… 3 Safety statements .........................................................................… 4 Network setup ..................................................................………….. 6 Ad-hoc network ...................................................... 6 Infrastructure network ............................................ 6 System requirements……………………………………………………..7 Installing the device drivers. ...........…………………………….... ……7 WL-159g specification summary....…….......................................….11
3Notices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION! You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
4Safety statements Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. CAUTION! To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance [20cm] between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. Safety Information In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance [20cm] between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. CAUTION! Any changes or modifications not expressly approved in this manual could void your authorization to use this device. MPE Statement Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal.
5FCC Radio Frequency Exposure This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency devices. The radiation output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation – as a mobile or portable device but use in a body-worn way is strictly prohibit. When using this device, a certain separation distance between antenna and nearby persons has to be kept to ensure RF exposure compliance. In order to comply with the RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than [20cm]. RF Exposure The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. About this guide This user guide contains the information you your ASUS USB Wireless LAN Module.
6Network setup The ASUS USB Wireless LAN Adapter may be used in both Ad-hoc and Infrastructure network types. The following sections describe the device functions in these network types. Ad-hoc network In an Ad-hoc network type, the device connects to another wireless LAN adapter in a wireless network. No access point (AP) is present in this wireless environment. Determine your network settings before installing the device to avail all its features. The following network settings are recommended. Infrastructure network In an Infrastructure network, the wireless network is centered on an access point (AP) that provides a central link for wireless clients to communicate with each other or with a wired network.
7System requirements Before installing the ASUS USB Wireless LAN Adapter, make sure that your system meets the following requirements: • Intel® Pentium® 4 or AMD K7/K8 system • Minimum 64MB system memory • Windows® 98SE/ME/2000/XP operating system • Optical drive (for software installation) • An available USB port (USB 2.0 recommended because USB 1.1 cannot achieve maximum wireless performance) Installing the device drivers To install the device driver in your computer: Insert the support CD to the optical drive and follow the following procedure.
8
9
10
11WL-159g specification summary Network Standard IEEE 802.11g, backward compatible with 802.11b device Size 71.4mm L* 13.3 mm W* 8 mm H(± 0.2) Host interface dimension USB 2.0 like 7 pin connector Antenna There are 2 manufacture options: a. One onboard chip antenna & one U.FL to connect external antenna b. 2 U.FL connectors to 2 external antennas Note: This option must be define before place order Data Rate 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11b:1, 2, 5.5, 11Mbps Modulation OFDM, CCK (11Mbps, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps) Technology OFDM and DSSS Network Architecture Types Infrastructure and ad-hoc Operating Frequency 2.412-2.462 GHz (N. America); 2.412-2.484 GHz (Japan); 2.412-2.472 GHz (Europe ETSI) Operating Channels N. America: CH1~CH11 Worldwide: CH1~CH13 Japan: CH1~CH14 (802.11b) and CH1~CH13 (802.11g) RF Output Power 15dBm@54Mbps;16dBm@48Mbps;20dBm@11Mbps Receiver Sensitivity PER< 8% @ length=1024 octets (at nominal temp. range) 11Mbps: -86~--87 dBm; 54 Mbps: -68 ~ -70 dBm; Power Consumption TX power consumption:300mA@54Mbps; 400mA@11Mbps RX power consumption :200mA WEP 40/128-bit WEP; each includes 4 user-defined keys Support WPA (under WinXP SP1 later) Integrate hardware security engine: WEP64, WEP128, WEP256, AES-CCM, TKIP Windows XP Compatibility Native support for all built-in WLAN functions, like Zeroconfig, Media Sense and 802.1x Support OS Windows 98SE , ME, 2000, XP Storage Temperature -40~ 70℃
12Humidity (non-condensing) 5~95% Emissions ETS 300 328 and ETS 300 826; CE Mark; FCC Part 15C, Section 15.247Weight 4 g Warranty Two-year limited warranty Trade Name Model No. Antenna Description Antenna Type Antenna Gain Final test SmartAnt SAA04-05032E Portable Panel Directional Antenna Connector (Panel Directional) 6dBi 9 YAGEO CAN4313374012521B CAN4313374022521B Dual Band Antenna Connector 1.3dBi 9 MAG LAYERS LTA-5824-2G4H2-A1 SMD Antenna Soldered on PCB 2dBi 9 YAGEO CAN4313382012501B Multi Band Antenna Connector 0.37dBi

Navigation menu