ASUSTeK Computer X00HD ASUS Phone (Mobile Phone) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3541864
Application ID	O0uzrFf+eXfyZMybzdGwcQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.39kB (729858 bits)
Date Submitted	2017-09-01 00:00:00
Date Available	2018-03-04 00:00:00
Creation Date	2017-08-25 16:38:58
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-08-29 14:26:45
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

User Guide
E12770
15060-97610000
ASUS Phone (Mobile Phone)
First Edition / August 2017
Model: ZC520KL (ASUS_ X00HD)
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Receiver
LED indicator
Front camera
Proximity
sensor and
light sensor
Camera flash
Touch screen
display
Touch keys
Fingerprint sensor
Side features
Audio jack
Microphone
Nano SIM /
MicroSD card
slot
Volume key
Power Key
Micro USB port
Speaker
Speaker
Rear features
Rear camera
Camera flash
Rear cover
Charging your ASUS Phone
To charge your ASUS Phone:
1.
2.
3.
Connect the USB connector into the power
adapter’s USB port.
Connect the other end of the micro USB cable
to your ASUS Phone.
Plug the power adapter into a wall socket.
IMPORTANT!
•
When using your ASUS Phone while it is
plugged to a power outlet, the grounded
power outlet must be near to the unit and
easily accessible.
•
When charging your ASUS Phone through
your computer, ensure that you plug the micro
USB cable to your computer’s USB port.
•
Avoid charging your ASUS Phone in an
environment with ambient temperature of
above 35 °C (95 °F).
NOTES:
•
For safety purposes, use ONLY the bundled
power adapter and cable to avoid damaging
your device and prevent the risk of injury.
•
For safety purposes, use ONLY the bundled
power adapter and cable to charge your
ASUS Phone.
•
The input voltage range between the wall
outlet and this adapter is AC 100V - 240V.
The output voltage of the micro USB cable is
+5V 2A, 10W.
Charging other devices
Use your ASUS Phone to power-charge other
mobile devices.
To charge other devices with ASUS Phone:
1.
2.
Connect one end of the USB cable to the
device that you want to charge and the other
end to the OTG cable.
Connect the other end of the OTG cable to
your ASUS Phone.
OTG cable
USB cable
Charging modes
Choose either of the following modes:
OTG mode: Charges attached devices a up to 0.5A
standard current.
Reverse charging mode (optional): When
this mode is selected, your ASUS Phone turns
off to provide rapid reverse charging that can
output a high speed, high charging current up to
1.5A - depending on the device being charged.
In this mode, your ASUS Phone can still monitor
the charge levels. When battery power on your
ASUS Phone is below 20%, your ASUS Phone
automatically turns on and changes to OTG
charging mode.
Installing a Nano SIM / MicroSD card
To install a Nano SIM / MicroSD card:
1.
Push a pin into the hole on the Nano SIM /
MicroSD card slot to eject the tray out. Insert
the Nano SIM or MicroSD card(s) into the card
slots.
2.
Push the tray to close it.
NOTES:
•
•
The Nano SIM card slots support LTE,
WCDMA and GSM/GPRS/EDGE network
bands.
The MicroSD card slot supports MicroSD,
MicroSDHC and MicroSDXC card formats.
IMPORTANT: When two SIM cards are inserted,
only one SIM card slot supports 4G/3G/2G service.
The other SIM card slot only supports 2G/3G
service.
CAUTION:
•
•
Do not use sharp tools or solvent on your
device to avoid scratches on it.
Use only standard Nano SIM cards on your
ASUS Phone. A trimmed SIM card may not
properly fit into and may not be detected by
your ASUS Phone.
Using GPS (Global Positioning System)
on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
•
•
•
Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
For first-time use of a GPS-enabled app on
your device, ensure that you are outdoors to
get the best positioning data.
When using a GPS-enabled app on
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
Federal Communications
Commission Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user‘s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
The antenna(s) used for this transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
The country code selection is for non-US models
only and is not available to all US models. Per FCC
regulation, all WiFi products that are marketed in US
must be fixed to US-operated channels only.
RF Exposure Information (SAR)
This device has been tested and meets applicable
limits for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at
which the body absorbs RF energy. SAR limits are
1.6 Watts per kilogram (over a volume containing
a mass of 1 gram of tissue) in countries that follow
the United States FCC limit and 2.0 W/kg (averaged
over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR
are conducted using standard operating positions
with the device transmitting at its highest certified
power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device
at least 10 mm away from your body to ensure
exposure levels remain at or below the as-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
with RF exposure guidelines, in a manner that
has not been tested or certified, and use such
accessories should be avoided.
The highest FCC SAR values for the device are as
follows:
•
1.19 W/Kg @1g(Head)
•
0.96 W/Kg @1g(Body)
The FCC has granted an Equipment Authorization
for this device with all reported SAR levels evaluated
as in compliance with the FCC RF exposure
guidelines. SAR information on this device is on file
with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: MSQX00HD.
Canada, Industry Canada (IC)
Notices
This device complies with Industry Canada’s
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux normes CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. Son utilisation est sujette aux
deux conditions suivantes :
(1) Cet appareil ne doit pas créer d’interférences
nuisibles, et
(2) Cet appareil doit tolérer tout type
d’interférences, y compris celles susceptibles
de provoquer un fonctionnement non souhaité
de l’appareil.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device
is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be
used in such a manner such that the potential
for human contact during normal operation is
minimized. This device has been evaluated for and
shown compliant with the IC Specific Absorption
Rate (“SAR”) limits when installed in specific host
products operated in portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found
at the following web address: http://www.ic.gc.ca/
app/sitt/reltel/srch/nwRdSrch.do?lang=eng.
Additional Canadian information on RF exposure
also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html.
Informations concernant l’exposition aux
fréquences radio (RF)
La puissance de sortie émise par cet appareil
sans fil est inférieure à la limite d’exposition aux
fréquences radio d’Industrie Canada (IC). Utilisez
l’appareil sans fil de façon à minimiser les contacts
humains lors d’un fonctionnement normal.
Cet appareil été évalué et démontré conforme
aux limites de DAS (Débit d’absorption spécifique)
d’IC lorsqu’il est installé dans des produits hôtes
particuliers qui fonctionnent dans des conditions
d’exposition à des appareils portables.
Ce périphérique est homologué pour l’utilisation
au Canada. Pour consulter l’entrée correspondant
à l’appareil dans la liste d’équipement radio (REL
- Radio Equipment List) d’Industrie Canada rendezvous sur :
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.
do?lang=eng.
Pour des informations supplémentaires concernant
l’exposition aux ondes radio au Canada, rendezvous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html.
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
This device and its antenna(s) must not be colocated or operated in conjunction with any other
antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for
products that are marketed in the US/ Canada.
Cet appareil et son ou ses antenne(s) ne doivent
pas être situés près de ou utilisés conjointement
avec une autre antenne ou un autre émetteur,
exception faite des radios intégrées qui ont été
testées.
La fonction de sélection de l’indicatif du pays est
désactivée pour les produits commercialisés aux
États-Unis et au Canada.
The IC ID for this device is 3568A-X00HD.
L’identifiant Industrie Canada de cet appareil est:
3568A-X00HD.
Additional statements for phones:
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device
at least 10 mm away from your body to ensure
exposure levels remain at or below the as-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
with RF exposure guidelines, in a manner that
has not been tested or certified, and use such
accessories should be avoided.
Déclaration supplémentaire pour les téléphones :
Pour réduire les risques d’exposition aux fréquences
radio, utilisez un dispositif mains libres ou toute
solution similaire pour maintenir cet appareil à
distance de votre tête et de votre corps. Maintenez
cet appareil à une distance d’au moins 10 mm de
votre corps pour que le niveau d’exposition ne
dépasse pas les niveaux testés. Utilisez seulement
des pinces-ceintures, étuis ou accessoires ne
comportant pas d’éléments métalliques. L’utilisation
d’autres accessoires contenant des substances
métalliques peut ne pas assurer la conformité aux
recommandations d’exposition.
EU Radio Equipment Directive
Compliance
Simplified EU Declaration of Conformity
Hereby, ASUSTek Computer Inc. declares that the
radio equipment ASUS_X00HD is in compliance
with Directive 2014/53/EU. Full text of EU
declaration of conformity is available at https://www.
asus.com/support/. (Search for ZC520KL)
RF Output Table
Items
Bluetooth
WLAN
GSM
WCDMA
LTE
Maximum Radio-Frequency Output Power Table
Bluetooth BR/EDR (2402~2480 MHz)
9.5 dBm
Bluetooth 4.2-LE (2402~2480 MHz)
-1.4 dBm
2.4GHz 802.11b (2412~2472 MHz)
15.6 dBm
2.4GHz 802.11g (2412~2472 MHz)
13 dBm
2.4GHz 802.11n HT20 (2412~2472
MHz)
12 dBm
2.4GHz 802.11n HT40 (2422~2462
MHz)
12.1 dBm
GSM 900 Burst (880~915; 925~960
MHz)
32.95 dBm
GSM 1800 Burst (1710~1785;
1805~1880 MHz)
29.79 dBm
WCDMA Band I (1920~1980;
2110~2170 MHz)
23.03 dBm
WCDMA Band VIII (880~915; 925~960 22.94 dBm
MHz)
LTE Band I (1920~1980; 2110~2170
MHz)
22.44 dBm
LTE Band III (1710~1785; 1805~1880
MHz)
23.27 dBm
LTE Band VII (2500~2570; 2620~2690 22.26 dBm
MHz)
LTE Band VIII (880~915; 925~960
MHz)
22.35 dBm
LTE Band XX (832~862; 791~821
MHz)
22.3 dBm
LTE Band XL (2300~2400 MHz)
22.1 dBm
NOTE: This RF output power table is for EU
member states, the EEA States, the EFTA States
and Turkey only. The frequency range and the
RF output power may differ from other non-EU
countries.
RF Exposure Information
This ASUS product has been tested and meets
applicable European SAR limits. The SAR limit is
2.0 W/kg in countries that set the limit averaged
over 10 grams of tissue. The specific maximum SAR
values for this device are as follows:
•
Head: 0.681 W/Kg
•
Body: 1.490 W/Kg
When carrying this device or using it while worn on
the body, either use an approved accessory such
as a holster or otherwise maintain a distance of 0.5
cm from the body to ensure compliance with RF
exposure requirements.  
CE Marking
Safety information
CAUTION! Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
ASUS Phone care
•
Use your ASUS Phone in an environment with
ambient temperatures between 0 °C (32 °F)
and 35 °C (95 °F).
The battery
WARNING: Disassembling the battery by yourself
will void its warranty and may cause serious harm.
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
•
•
•
•
•
•
•
•
•
•
•
Do not remove the non-detachable li-polymer
battery as this will void the warranty.
Avoid charging in extremely high or low
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
Do not remove and replace the battery with a
non-approved battery.
Use only ASUS battery. Using a different
battery may cause physical harm/injury and
may damage your device.
Do not remove and soak the battery in water or
any other liquid.
Never try to open the battery as it contains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
Do not remove and short-circuit the battery, as
it may overheat and cause a fire. Keep it away
from jewelry or metal objects.
Do not remove and dispose of the battery
in fire. It could explode and release harmful
substances into the environment.
Do not remove and dispose of the battery with
your regular household waste. Take it to a
hazardous material collection point.
Do not touch the battery terminals.
To avoid fire or burns, do not disassemble,
bend, crush, or puncture the battery.
NOTES:
•
•
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
The charger
•
•
Use only the charger supplied with your ASUS
Phone.
Never pull the charger cord to disconnect it
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
•
•
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C (32 °F) and 35 °C (95 °F).
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shock or fire may result.
Do not short-circuit the battery terminals with
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
General Usage (typical body-worn)
This device (front & rear side) should be operated
under a seperation distance of 5 mm from the
human body.
* The other four sides are not in close proximity to
the human body at the general use as described
above.
India E-waste (Management) Rules
2016
This product complies with the “India E-Waste
(Management) Rules, 2016” and prohibits
use of lead, mercury, hexavalent chromium,
polybrominated biphenyls (PBBs) and
polybrominated diphenyl ethers (PBDEs) in
concentrations exceeding 0.1% by weight in
homogenous materials and 0.01 % by weight in
homogenous materials for cadmium, except for the
exemptions listed in Schedule II of the Rule.
Regional notice for Singapore
This ASUS Phone complies
with IMDA Standards.
Complies with
IMDA Standards
DB103778
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
DO NOT throw this product in municipal
waste. This product has been designed to
enable proper reuse of parts and recycling.
The symbol of the crossed out wheeled
bin indicates that the product (electrical,
electronic equipment and mercurycontaining button cell battery) should not
be placed in municipal waste. Check
local regulations for disposal of electronic
products.
DO NOT throw this product in fire. DO
NOT short circuit the contacts. DO NOT
disassemble this product.
WARNING
Cancer and Reproductive Harmwww.P65Warnings.ca.gov
NOTE: For more legal and e-labelling information,
check on your device from Settings > About >
Legal information.
ASUS
Address: 4F, 150 Li-Te Road, Peitou, Taipei,
Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
Copyright © 2017 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website,  and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2017:08:25 16:38:58+08:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2017:08:29 14:26:45+08:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Metadata Date                   : 2017:08:25 16:39:02+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:652d3d48-8314-45d9-b940-de7ed5386d64
Original Document ID            : adobe:docid:indd:6e7de199-93df-11e3-993e-ee19c20c8249
Document ID                     : xmp.id:61268EC67089E7118BA2F97F3DA0770E
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:60268EC67089E7118BA2F97F3DA0770E
Derived From Document ID        : xmp.did:AB166DEFF22AE71191E6D994F18E7DA5
Derived From Original Document ID: adobe:docid:indd:6e7de199-93df-11e3-993e-ee19c20c8249
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:08:25 16:38:58+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 20

EXIF Metadata provided by EXIF.tools