ASUSTeK Computer X018D ASUS Phone (Mobile Phone) User Manual

ASUSTeK Computer Inc ASUS Phone (Mobile Phone)

User manual

E13750User Guide15060-0HP00000
First Edition/ Nov. 2017ASUS Phone (Mobile Phone)Model: ASUS_X018D (ZB570TL)Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus.com/support/.Front featuresTouch screen displayReceiverFront cameraLED indicatorSensor
Side featuresPower KeyAudio jackMicro USB portVolume KeyNano SIM1, Nano SIM2, MicroSD card slotSpeakerMicrophone
Rear featuresRear cameraCamera flashRear coverFingerprint sensor
Charging your ASUS PhoneTo charge your ASUS Phone:1. Connect the USB connector into the power adapter’s USB port.2. Connect the other end of the micro USB cable to your ASUS Phone. 3. Plug the power adapter into a wall socket.NOTES:• Forsafetypurposes,useONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.• Forsafetypurposes,useONLY the bundled power adapter and cable to charge your ASUS Phone.• Theinputvoltagerangebetweenthewalloutlet and this adapter is AC 100V - 240V. The output voltage of the micro USB cable is 5V, 2A 10W. IMPORTANT!• WhenusingyourASUSPhonewhileitisplugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.• WhenchargingyourASUSPhonethroughyour computer, ensure that you plug the micro USB cable to your computer’s USB 2.0 / USB 3.0 port.• AvoidchargingyourASUSPhoneinanenvironment with ambient temperature of above 35oC (95oF). 312
1. Push the bundled eject pin into the hole on the card slot to eject the tray out.Installing a Nano SIM / MicroSD cardTo install a Nano SIM / MicroSD card:2. Insert the Nano SIM or MicroSD card into the appropriate slot.3. Push the tray to close it.
NOTES:• TheNanoSIMcardslotssupportLTE,WCDMA and GSM/EDGE network bands.• TheMicroSDcardslotsupportsMicroSDandMicroSDHC card formats.CAUTION!• Donotusesharptoolsorsolventonyourdevice to avoid scratches on it. • UseonlyastandardNanoSIMcardonyourASUS Phone.IMPORTANT: When two SIM cards are inserted, only one SIM card slot supports 4G/3G service. The other SIM card slot only supports 3G service.Charging other devicesUse your ASUS Phone to power-charge other mobile devices.
Federal Communications Commission StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changesormodicationsnotexpresslyapprovedbythe party responsible for compliance could void the user‘s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consultthedealeroranexperiencedradio/TVtechnician for help.The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US mustbexedtoUS-operatedchannelsonly.The responsible party within the USA per 47 CFR Part 2.1077(a)(3):ASUS COMPUTER INTERNATIONAL (America)Address: Corporate Way, Fremont, CA 94539, USATelephone: +1-510-739-3777RF Exposure Information (SAR)This device has been tested and meets applicable limitsforRadioFrequency(RF)exposure.SpecicAbsorptionRate(SAR)referstotherateatwhich the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions withthedevicetransmittingatitshighestcertiedpower level in all tested frequency bands. ToreduceexposuretoRFenergy,useahands-freeaccessory or other similar option to keep this device away from your head and body. Carry this device at least 10 mm away from your body to ensure exposurelevelsremainatorbelowtheas-testedlevels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance withRFexposureguidelines,inamannerthathasnotbeentestedorcertied,andusesuchaccessories should be avoided.
The highest FCC SAR values for the device (ASUS_X018D) are as follows:• 0.41W/Kg@1g(Head)• 1.20W/Kg@1g(Body)The FCC has granted an Equipment Authorization for this device (ASUS_X018D) with all reported SAR levels evaluated as in compliance with the FCC RF exposureguidelines.SARinformationonthisdeviceisonlewiththeFCCandcanbefoundundertheDisplay Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQX018D.FCC Statement (HAC)This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questionsaboutreturnorexchangepolicies,consultyour service provider or phone retailer.The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19-2011. There are two sets of ANSI standards with ratings from one to four (four being the best rating): an “M” rating for reduced interference making it easier to hear conversationson the phone when using the hearing aid microphone, and a “T” rating that enables the phone
to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise.The Hearing Aid Compatibility rating is displayed on thewirelessphonebox.A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an “M3” or “M4” rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a “T3” or “T4” rating.The tested M-Rating and T-Rating for this device (ASUS_X018D) are M4 and T3.You’ll want to try a number of wireless phones so that you can decide which works the best with your hearing aids. You may also want to talk with your hearingaidprofessionalabouttheextenttowhichyour hearing aids are immune to interference, if they have wireless phone shielding, and whether your hearing aid has a HAC rating.Canada, Industry Canada (IC) NoticesThis device complies with Industry Canada’s licence-exemptRSSstandard(s).Operationissubject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.LeprésentappareilestconformeauxnormesCNRd’IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.Sonutilisationestsujetteauxdeuxconditionssuivantes:(1) Cet appareil ne doit pas créer d’interférences nuisibles, et (2) Cet appareil doit tolérer tout type d’interférences, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil.
Radio Frequency (RF) Exposure InformationThe radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposurelimits.TheWirelessDeviceshouldbeused in such a manner such that the potential for human contact during normal operation is minimized. This device (ASUS_X018D) has been evaluated for and shown compliant with the IC SpecicAbsorptionRate(“SAR”)limitswheninstalledinspecichostproductsoperatedinportableexposureconditions.Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng.AdditionalCanadianinformationonRFexposurealso can be found at the following web address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.This equipment should be installed and operated with minimum distance 1.0 cm between the radiator and your body.Cet appareil doit être installé et utilisé avec une distance minimale de 1.0 cm entre l’ émetteur et votre corps.Informations concernant l’exposition aux fréquences radio (RF)La puissance de sortie émise par cet appareil sanslestinférieureàlalimited’expositionauxfréquences radio d’Industrie Canada (IC). Utilisez l’appareilsansldefaçonàminimiserlescontactshumains lors d’un fonctionnement normal.Cet appareil été évalué et démontré conforme auxlimitesdeDAS(Débitd’absorptionspécique)d’IC lorsqu’il est installé dans des produits hôtes particuliers qui fonctionnent dans des conditions d’expositionàdesappareilsportables.Ce périphérique est homologué pour l’utilisation
au Canada. Pour consulter l’entrée correspondant àl’appareildanslalisted’équipementradio(REL- Radio Equipment List) d’Industrie Canada rendez-vous sur :http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng.Pour des informations supplémentaires concernant l’expositionauxondesradioauCanada,rendez-vous sur :http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.CAN ICES-3(B)/NMB-3(B)This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme àlanormeNMB-003duCanada.This device and its antenna(s) must not be co-located or operated in conjunction with any other antennaortransmitter,excepttestedbuilt-inradios.The County Code Selection feature is disabled for products that are marketed in the US/ Canada.Cet appareil et son ou ses antenne(s) ne doivent pas être situés près de ou utilisés conjointement avec une autre antenne ou un autre émetteur, exceptionfaitedesradiosintégréesquiontététestées. La fonction de sélection de l’indicatif du pays est désactivéepourlesproduitscommercialisésauxÉtats-Unis et au Canada.The IC ID for this device (ASUS_X018D) is 3568A-X018D.L’identiantIndustrieCanadadecetappareil(ASUS_X018D) est: 3568A-X018D.
EU Radio Equipment Directive ComplianceSimplified EU Declaration of ConformityHereby, ASUSTek Computer Inc. declares that the radio equipment type ASUS_X018D is in compliancewithDirective2014/53/EU.FulltextofEU declaration of conformity is available at https://www.asus.com/support/. (search for ZB570TL)RF Output TableItems Maximum Radio-Frequency Output Power TableBluetooth Bluetooth BR/EDR (2402~2480 MHz) 7.72(dBm)Bluetooth 4.0-LE (2402~2480 MHz) -0.02(dBm)WLAN2.4GHz 802.11b (2412~2472 MHz) 16.02(dBm)2.4GHz 802.11g (2412~2472 MHz) 14.11(dBm)2.4GHz 802.11n HT20 (2412~2472 MHz) 12.09(dBm)2.4GHz 802.11n HT40 (2422~2462 MHz) 12.04(dBm)GSMGSM 900 Burst (880~915; 925~960 MHz) 32.81(dBm)GSM 1800 Burst (1710~1785 ; 1805~1880 MHz)29.66(dBm)WCDMAWCDMA Band I (1920~1980 ; 2110~2170 MHz)23.62(dBm)WCDMA Band VIII (880~915 ; 925~960 MHz)23.33(dBm)LTELTE Band I (1920~1980; 2110~2170 MHz)23.26(dBm)LTE Band III (1710~1785; 1805~1880 MHz)23.29(dBm)LTE Band V (824~849; 869~894 MHz) 23.6(dBm)LTE Band VII (2500~2570; 2620~2690 MHz)23.36(dBm)LTE Band VIII (880~915; 925~960 MHz) 23.36(dBm)LTE Band XX (832~862; 791~821 MHz) 23.24(dBm)LTE Band XL (2300~2400 MHz) 23.61(dBm)
RF Exposure and SAR ComplianceThis ASUS product has been tested and meets applicable European SAR limits. The SAR limit is 2.0 W/kg in countries that set the limit averaged over10gramsoftissue.ThespecicmaximumSARvalues for this device are as follows:Head:0.282W/KgBody:0.746W/KgWhen carrying this device or using it while worn on the body, either use an approved accessory such as a holster or otherwise maintain a distance of 0.5 cm from the body to ensure compliance with RF exposurerequirements.CE MarkingUsing GPS (Global Positioning System) on your ASUS PhoneTo use the GPS positioning feature on your ASUS Phone:• Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps.• Forrst-timeuseofaGPS-enabledapponyour device, ensure that you are outdoors to get the best positioning data.NOTE: This RF output power table is for EU member states, the EEA States, the EFTA States and Turkey only. The frequency range and the RF output power may differ from other non-EU countries.
• When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.Prevention of Hearing LossTo prevent possible hearing damage, do not listen at high volume levels for long periods.Safety informationCAUTION! Use of controls or adjustments or performance of procedures other than those speciedhereinmayresultinhazardousradiationexposure.ASUS Phone care• UseyourASUSPhoneinanenvironmentwithambient temperatures between 0 °C (32 °F) and 35 °C (95 °F). For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1.
The batteryWARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm.Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.• Donotremovethenon-detachableLi-polymerbattery as this will void the warranty.• Avoidcharginginextremelyhighorlowtemperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C.• Donotremoveandreplacethebatterywithanon-approved battery.• UseonlyASUSbattery.Usingadifferentbattery may cause physical harm/injury and may damage your device.• Donotremoveandsoakthebatteryinwaterorany other liquid.• Nevertrytoopenthebatteryasitcontainssubstances that might be harmful if swallowed or allowed to come into contact with unprotected skin.• Donotremoveandshort-circuitthebattery,asitmayoverheatandcauseare.Keepitawayfrom jewelry or metal objects.• Donotremoveanddisposeofthebatteryinre.Itcouldexplodeandreleaseharmfulsubstances into the environment.• Donotremoveanddisposeofthebatterywithyour regular household waste. Take it to a hazardous material collection point.• Donottouchthebatteryterminals.• Toavoidreorburns,donotdisassemble,bend, crush, or puncture the battery.
NOTES:• Riskofexplosionifbatteryisreplacedbyanincorrect type.• Disposeofusedbatteryaccordingtotheinstructions.The charger• UseonlythechargersuppliedwithyourASUSPhone.• Neverpullthechargercordtodisconnectitfrom the power socket. Pull the charger itself.CautionYour ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.• DonotusetheASUSPhoneinanextremeenvironment where high temperature or high humidityexists.TheASUSPhoneperformsoptimally in an ambient temperature between 0 °C (32 °F) and 35 °C (95 °F).• DonotdisassembletheASUSPhoneoritsaccessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shockorremayresult.• Donotshort-circuitthebatteryterminalswithmetal items.Operator access with a toolIf a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.
General Usage (typical body-worn)This device (front & rear side) should be operated under a seperation distance of 5 mm from the human body.*Theotherfoursidesarenotincloseproximitytothe human body at the general use as described above.ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.India E-waste (Management) Rules 2016This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits useoflead,mercury,hexavalentchromium,polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrationsexceeding0.1%byweightinhomogenousmaterialsand0.01%byweightinhomogenousmaterialsforcadmium,exceptfortheexemptionslistedinScheduleIIoftheRule.Regional notice for SingaporeThis ASUS Phone complies with IMDA Standards.
Proper disposalRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.DONOTthrowthisproductinre.DONOT short circuit the contacts. DO NOT disassemble this product.WARNINGCancer and Reproductive Harm- www.P65Warnings.ca.govNOTE: For more legal and e-labelling information, check on your device from Settings > About > Legal information.
Copyright©2017ASUSTeKCOMPUTERINC.All Rights Reserved.You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website,andshallremaintheexclusivepropertyofASUSand/oritslicensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OFANYKIND.SPECIFICATIONSANDINFORMATIONCONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.ASUSAddress: 4F, 150 Li-Te Road, Peitou, Taipei, TaiwanTel: 886228943447Fax: 886228907698DeclarationWe declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressedintheGSMstandards.Should you have any questions or comments regarding this matter, please contact us.Sincerely yours,ASUSTeK COMPUTER INC.Tel: 886228943447Fax:886228907698Support: https://www.asus.com/support/ZenTalk Fans Forum (http://www.asus.com/zentalk/global_forward.php)

Navigation menu