ASUSTeK Computer Z01FD ASUS Phone User Manual
ASUSTeK Computer Inc ASUS Phone Users Manual
Users Manual
E11690
User Guide
First Edition/ May 2016
Model:ASUS_Z01FD
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Touch screen
display
Receiver
LED indicator
Touch keys
Front camera
Proximity sensor and light sensor
Side features
Power key
Audio jack
USB Type C port
Microphone
Volume key
Speaker
Microphone
Micro SIM,
Nano SIM/
microSD
combo card
slot
NOTE: The USB Type-C port supports USB2.0
transfer rate.
Charging your ASUS Phone
To charge your ASUS Phone:
1. Connect the USB connector into the power
adapter’s USB port.
2. Connect the other end of the USB Type C
cable to your ASUS Phone.
3. Plug the power adapter into a wall socket.
Rear features
Rear camera
RGB sensor /
Camera ash
Rear cover
Laser focus
Fingerprint
sensor
NFC detaction aera
NOTES:
• Useonlythepoweradapterthatcamewithyour
device. Using a different power adapter may
damage your device.
• UsingthebundledpoweradapterandASUS
Phone signal cable to connect your ASUS Phone
to a power outlet is the best way to charge your
ASUS Phone.
• UsetheASUS18WpoweradapterandASUS
USB Type C cable to get the best fast-charge
experience when your ASUS Phone is in sleep
mode.
• Theinputvoltagerangebetweenthewalloutlet
and this adapter is AC 100V - 240V. The output
voltage of the USB Type C cable is +5V 2A,
10W/+9V 2A,18W.
IMPORTANT!
• WhenusingyourASUSPhonewhileitisplugged
to a power outlet, the grounded power outlet must
be near to the unit and easily accessible.
• WhenchargingyourASUSPhonethroughyour
computer, ensure that you plug the USB Type C
cable to your computer’s USB 2.0 / USB 3.0 port.
• AvoidchargingyourASUSPhoneinan
environment with ambient temperature of above
35 °C(95°F).
3
1
2
Installing a Micro SIM / Nano SIM /
MicroSD card
To install a Micro SIM / Nano SIM / MicroSD card:
1. Push a pin into the hole
on the Micro SIM / Nano
SIM / MicroSD card tray
to eject it.
2. Insert the Micro SIM / Nano SIM or MicroSD
card(s) into the card slot(s).
Micro-SIM1
Nano-SIM2
Micro-SIM1
Micro SD
IMPORTANT: You can only use the Nano SIM
card or the MicroSD card at a time.
CAUTION!
• Donotusesharptoolsorsolventonyour
device to avoid scratches on it.
• UseonlyastandardmicroSIMcardonyour
ASUS Phone. A nano to micro SIM adapter
oratrimmedSIMcardmaynotproperlyt
into and may not be detected by your ASUS
Phone.
• DO NOT install an empty nano to micro
SIM adapter into the micro SIM card slot to
avoid irreversible damage.
3. Push the tray to close it
IMPORTANT: Both Micro SIM and Nano SIM card
slotssupport2GGSM/EDGE,3GWCDMAand
4G LTE network bands. But only one SIM card can
connectto3GWCDMA/4GLTEnetworkservice
at a time.
NOTES:
• TheMicroSIM/NanoSIMcardslotsLTE,
WCDMAandGSM/EDGEnetworkbands.
• ThemicroSDcardslotsupportsmicroSDand
microSDHC card formats.
FCC Regulations
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changesormodicationsnotexpresslyapprovedby
the party responsible for compliance could void the
user‘s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweenthe
equipment and receiver.
• Connecttheequipmentintoanoutletona
circuit different from that to which the receiver
is connected.
• Consultthedealeroranexperiencedradio/TV
technician for help.
5GHz product for indoor use only.
Hearing Aid Compatibility Information
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies it
uses. However, there may be some newer wireless
technologies used in this phone that have not been
tested yet for use with hearing aids. It is important
to try the different features of this phone thoroughly
and in different locations, using your hearing aid
or cochlear implant, to determine if you hear any
interfering noise. Consult your service provider or
the manufacturer of this phone for information on
hearing aid compatibility. If you have questions
about return or exchange policies, consult your
service provider or phone retailer.
Hearing Aid Compatibility Rating
This model handset is designed to comply with
therequirementssetforthinSection20.19ofthe
Federal Communication Commission’s (FCC) rules
governing hearing aid compatibility (HAC), for the
reduction of RF interference and magnetic coupling
(T-coil) to hearing aids. The Microphone (M) rating
andT-coil(T)ratingaredenedandlabeledonthe
handset box. Devices meeting HAC compliance
must have a minimum M3 and/or T3rating or above
asdenedbytheFCCinaccordancewiththelatest
ANSIStandardC63.19.The(M)ratingrefersto
lower RF emission levels of the handset. The (T)
rating refers to the magnetic coupling between the
handset and the T-coil compatible hearing aid.
Some hearing aids also provide an (M) rating, and
are more immune than others to interference. To
determine the (M) rating of your hearing aid, please
contact your hearing health professional.
CAUTION!Changesormodicationsnotexpressly
approved by the part responsible for compliance could
void the user’s authority to operate the equipment.
Industry Canada Statement
This device complies with RSS-247 of Industry
Canada. Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
Avis d’industrie Canada
Le present appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence.L’exploitation est autorisee aux
deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage,
et, and
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioelectrique subi, meme si le
brouillage est susceptible d’en compromettre le
fonctionnement.
Industry Canada Class B Emission Compliance
Statement
This Class B digital apparatus complies with
Canadian ICES-003.
Avis de conformite a la reglementation
d’Industrie Canada
Cet appareil numerique de la classe B est conforme
a la norme NMB-003 du Canada.
WhenusingIEEE802.11awirelessLAN,this
product is restricted to indoor use, due to its
operation in the 5.15- to 5.25-GHz frequency range.
Industry Canada requires this product to be used
indoors for the frequency range of 5.15 GHz to 5.25
GHz to reduce the potential for harmful interference
to co-channel mobile satellite systems. High-power
radar is allocated as the primary user of the 5.25- to
5.35-GHzand5.65-to5.85-GHzbands.These
radar stations can cause interference with and/or
damage to this device.
RF Radiation Exposure Statement
For body worn operation, this phone has been
tested and meets RF exposure guidelines when
used with an accessory that contains no metal and
that positions the handset a minimum of 1.0 cm from
the body. Use of other accessories may not ensure
compliance with RF exposure guidelines.
Déclaration de l’exposition aux radiations RF
Pour le fonctionnement du corps, ce téléphone
a été testé et répond aux directives d’exposition
RF lorsqu’il est utilisé avec un accessoire qui ne
contient pas de métal et qui place le combiné d’un
minimum de 1,0 cm du corps. Utilisation d’autres
accessoires peut ne pas assurer le respect des
directives d’exposition RF.
TheICIDforthisdeviceis3568A-Z01FD.
L’identiantIndustrieCanadadecetappareilest:
3568A-Z01FD.
RF Exposure Information (SAR)
This device has been tested and meets applicable
limits for Radio Frequency (RF) exposure.
SpecicAbsorptionRate(SAR)referstotherateat
which the body absorbs RF energy. SAR limits are
1.6Wattsperkilogram(overavolumecontaining
a mass of 1 gram of tissue) in countries that follow
theUnitedStatesFCClimitand2.0W/kg(averaged
over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR
are conducted using standard operating positions
withthedevicetransmittingatitshighestcertied
power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device
at least 10 mm away from your body to ensure
exposure levels remain at or below the as-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
with RF exposure guidelines, in a manner that
hasnotbeentestedorcertied,andusesuch
accessories should be avoided.
The highest FCC SAR values for the device are as
follows:
• 1.110W/Kg(Head)
• 1.184W/Kg(Body)
The FCC has granted an Equipment Authorization
for this device with all reported SAR levels evaluated
as in compliance with the FCC RF exposure
guidelines.SARinformationonthisdeviceisonle
with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: MSQZ01FD.
NOTES: For more Regulatory information and
compliance marks (E-labels) about FCC/IC/
MIC/VCCI, please refer to your device via the
following steps: Settings
>
About
>
Regulatory
Information.
CE RF Exposure Compliance
ThisdevicemeetstheEUrequirements(1999/519/
EC) on the limitation of exposure of the general
publictoelectromagneticeldsbywayofhealth
protection.
For body-worn operation, this device has been
tested and meets the ICNIRP guidelines and the
CLASS 1 LASER PRODUCT
EuropeanStandardEN62209-2,forusewith
dedicated accessories. SAR is measured with
this device at a separation of 0.5 cm to the body,
whiletransmittingatthehighestcertiedoutput
power level in all frequency bands of this device.
Use of other accessories which contain metals
may not ensure compliance with ICNIRP exposure
guidelines.
CE Mark Warning
CE marking for devices with wireless
LAN/ Bluetooth
This equipment complies with the requirements of
Directive1999/5/ECoftheEuropeanParliament
andCommissionfrom9March,1999governing
Radio and Telecommunications Equipment and
mutual recognition of conformity.The highest CE
SAR values for the device are as follows:
• 0.363W/kg@10g(Head)
• 1.350W/kg@10g(Body)
This device is restricted for indoor use only
when operating under 5150 MHz to 5350 MHz of
frequency range.
For 5GHz WLAN: This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
Laser safety information
Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
• Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
• Forrst-timeuseofaGPS-enabledappon
your device, ensure that you are outdoors to
get the best positioning data.
• WhenusingaGPS-enabledappon
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
Safety information
ASUS Phone care
• UseyourASUSPhoneinanenvironmentwith
ambient temperatures between 0 °C (32 °F)
and35°C(95°F).
The battery
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
• Donotremovethenon-detachableLi-polymer
battery as this will void the warranty.
• Avoidcharginginextremelyhighorlow
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
• Donotremoveandreplacethebatterywitha
non-approved battery.
• Donotremoveandsoakthebatteryinwateror
any other liquid.
• Nevertrytoopenthebatteryasitcontains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
• Donotremoveandshort-circuitthebattery,as
itmayoverheatandcauseare.Keepitaway
from jewelry or metal objects.
• Donotremoveanddisposeofthebattery
inre.Itcouldexplodeandreleaseharmful
substances into the environment.
• Donotremoveanddisposeofthebatterywith
your regular household waste. Take it to a
hazardous material collection point.
• Donottouchthebatteryterminals.
NOTES:
• Riskofexplosionifbatteryisreplacedbyan
incorrect type.
• Disposeofusedbatteryaccordingtothe
instructions.
The charger
• UseonlythechargersuppliedwithyourASUS
Phone.
• Neverpullthechargercordtodisconnectit
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
• DonotusetheASUSPhoneinanextreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C(32°F)and35°C(95°F).
• DonotdisassembletheASUSPhoneorits
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shockorremayresult.
• Donotshort-circuitthebatteryterminalswith
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
ASUS Recycling/Takeback
Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protectingourenvironment.Webelieveinproviding
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Regional notice for Singapore
This ASUS Phone complies with IDA Standards.
Proper disposal
Risk of explosion if battery is
replaced by an incorrect type.
Dispose of used batteries
according to the instructions.
DO NOT throw the battery in
municipal waste. The symbol of the
crossed out wheeled bin indicates
that the battery should not be placed
in municipal waste.
DO NOT throw this product in
municipal waste. This product has
been designed to enable proper
reuse of parts and recycling. The
symbol of the crossed out wheeled
bin indicates that the product
(electrical, electronic equipment
and mercury-containing button
cell battery) should not be placed
in municipal waste. Check local
regulations for disposal of electronic
products.
DONOTthrowthisproductinre.
DO NOT short circuit the contacts.
DO NOT disassemble this product.
WARNING! This product may contain chemicals
known to the State of California to cause cancer,
birthdefects,orotherreproductiveharm.Wash
hands after handling.
Copyright©2016ASUSTeKCOMPUTERINC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website, and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUSPROVIDESTHISMANUAL“ASIS”WITHOUTWARRANTY
OFANYKIND.SPECIFICATIONSANDINFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
ATANYTIMEWITHOUTNOTICE,ANDSHOULDNOTBE
CONSTRUED AS A COMMITMENT BY ASUS.
ASUS
Address: 4F, 150 LI-TE RD., PEITOU, TAIPEI,
TAIWAN
Tel: 886228943447
Fax: 886228907698
Declaration
WedeclarethattheIMEIcodesforthisproduct,ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel:886228943447
Fax:886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)
15060-82210000