ASUSTeK Computer Z01KDA ASUS Phone User Manual
ASUSTeK Computer Inc ASUS Phone
User Manual
E13419
User Guide
15060-96420100
ASUS Phone (Mobile Phone)
Second Edition / September 2017
Model: ASUS_Z01KD (ZE554KL)
ASUS_Z01KDA (ZE554KL)
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Touch screen
display
NFC detection
area
Receiver
Fingerprint sensor
Front
camera
Touch keys
Proximity sensor and light sensor
LED indicator
Side features
Power Key
Microphone
Audio jack
USB Type-C port
Microphone
Volume Key
Nano SIM /
MicroSD combo
card slot
Speaker
NOTE: The USB Type-C port supports USB2.0
transfer rate.
Rear features
Rear cameras
Camera ash
Rear cover
Charging your ASUS Phone
To charge your ASUS Phone:
1. Connect the USB connector into the power
adapter’s USB port.
2. Connect the other end of the USB Type C
cable to your ASUS Phone.
3. Plug the power adapter into a wall socket.
NOTES:
• Forsafetypurposes,useONLY the bundled
power adapter and cable to avoid damaging
your device and prevent the risk of injury.
• Forsafetypurposes,useONLY the bundled
power adapter and cable to charge your
ASUS Phone.
• Theinputvoltagerangebetweenthewall
outlet and this adapter is AC 100V - 240V.
The output voltage of the Type C cable is
+5V 2A, 10W or +9V 2A, 18W.
IMPORTANT!
• WhenusingyourASUSPhonewhileitis
plugged to a power outlet, the grounded
power outlet must be near to the unit and
easily accessible.
• WhenchargingyourASUSPhonethrough
your computer, ensure that you plug the USB
Type C cable to your computer’s USB port.
• AvoidchargingyourASUSPhoneinan
environment with ambient temperature of
above 35 °C (95 °F).
2
3
1
Installing a Nano SIM /MicroSD card
To install a Nano SIM / MicroSD card:
IMPORTANT: When two SIM cards are inserted,
only one SIM card slot supports 4G/3G/2G service.
The other SIM card slot only supports 2G/3G
service.
IMPORTANT: You can only use the Nano SIM 2
card or the MicroSD card at a time.
1. Push a pin into the hole on the Nano SIM /
MicroSD card slot to eject the tray out. Insert
the Nano SIM or MicroSD card(s) into the card
slots.
2. Push the tray to close it.
Micro SD
Nano-SIM1
Nano-SIM2
Nano-SIM1
NOTES:
• TheNanoSIMcardslotssupportLTE,
WCDMA and GSM/EDGE network bands.
• TheMicroSDcardslotsupportsMicroSDand
MicroSDHC card formats.
CAUTION!
• Donotusesharptoolsorsolventonyour
device to avoid scratches on it.
• UseonlyastandardNanoSIMcardonyour
ASUS Phone. A trimmed SIM card may not
properlytintoandmaynotbedetectedby
your ASUS Phone.
Using NFC
NOTE: NFC is only available in selected regions/
countries.
You can use NFC in the following three scenarios:
Reader mode: Your phone reads information from a
contactless card, NFC tag, or other NFC devices.
Place the NFC area of your phone on the
contactless card, NFC tag, or NFC device.
Peer-to-Peer mode: Transfers photos, contacts,
or other data between your phone and an NFC-
enabled smartphone.
Bring the NFC areas of both smartphones together,
without any space between them.
Card Emulation mode: Your phone can be used
like a contactless card.
Place the NFC area of your phone on the NFC area
of the NFC reader.
Federal Communication Commission
Interference Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This device has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweenthe
equipment and receiver.
• Connecttheequipmentintoanoutletona
circuit different from that to which the receiver
is connected.
• Consultthedealeroranexperiencedradio/TV
technician for help.
FCC Caution:
• AnyChangesormodicationsnotexpressly
approved by the party responsible for
compliance could void the user‘s authority to
operate the equipment.
• Theantenna(s)usedforthistransmittermust
not be co-located or operating in conjunction
with any other antenna or transmitter.
• Thecountrycodeselectionisfornon-USmodel
only and is not available to all US model. Per
FCC regulation, all WiFi product marketed in
USmustxedtoUSoperationchannelsonly.
RF Exposure Information (SAR)
This device meets the government’s requirements
forexposuretoradiowaves.
This device is designed and manufactured not
toexceedtheemissionlimitsforexposureto
radio frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government.
Theexposurestandardforwirelessdeviceemploys
aunitofmeasurementknownastheSpecic
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6W/kg. *Tests for SAR are conducted
using standard operating positions accepted by
the FCC with the device transmitting at its highest
certiedpowerlevelinalltestedfrequencybands.
Although the SAR is determined at the highest
certiedpowerlevel,theactualSARlevelofthe
device while operating can be well below the
maximumvalue.Thisisbecausethedeviceis
designed to operate at multiple power levels so as
to use only the poser required to reach the network.
In general, the closer you are to a wireless base
station antenna, the lower the power output.
For MSQZ01KD: The highest SAR value for the
model device as reported to the FCC when tested
for use at the ear is 1.18 W/kg and when worn on
the body, as described in this user guide, is 0.79 W/
kg (Body-worn measurements differ among device
models, depending upon available accessories and
FCC requirements.)
For MSQZ01KDA: The highest SAR value for the
model device as reported to the FCC when tested
for use at the ear is 1.13 W/kg and when worn on
the body is 0.73 W/kg.
While there may be differences between the SAR
levels of various devices and at various positions,
they all meet the government requirement.
The FCC has granted an Equipment Authorization
for this model device with all reported SAR levels
evaluated as in compliance with the FCC RF
exposureguidelines.SARinformationonthismodel
deviceisonlewiththeFCCandcanbefound
under the Display Grant section of www.fcc.gov/oet/
ea/fccid after searching on FCC ID:
• MSQZ01KD(forASUS_Z01KD [ZE554KL])
• MSQZ01KDA(forASUS_Z01KDA [ZE554KL])
For body worn operation, this device has
beentestedandmeetstheFCCRFexposure
guidelines for use with an accessory that contains
no metal and be positioned a minimum of
1cm(MSQZ01KD)/1.5cm(MSQZ01KDA) from the
body. Use of other accessories may not ensure
compliancewithFCCRFexposureguidelines.If
you do not use a body-worn accessory and are not
holding the device at the ear, position the handset a
minimum of 1cm(MSQZ01KD)/1.5cm(MSQZ01KDA)
from your body when the device is switched on.
FCC Statement (HAC)
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies
that it uses. However, there may be some newer
wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is
important to try the different features of this phone
thoroughly and in different locations, using your
hearing aid or cochlear implant, to determine if you
hear any interfering noise. Consult your service
provider or the manufacturer of this phone for
information on hearing aid compatibility. If you have
questionsaboutreturnorexchangepolicies,consult
your service provider or phone retailer.
The Federal Communications Commission has
implemented rules and a rating system designed
to enable people who wear hearing aids to more
effectively use these wireless telecommunications
devices. The standard for compatibility of digital
wireless phones with hearing aids is set forth
in American National Standard Institute (ANSI)
standard C63.19. There are two sets of ANSI
standards with ratings from one to four (four
being the best rating): an “M” rating for reduced
interference making it easier to hear conversations
on the phone when using the hearing aid
microphone, and a “T” rating that enables the phone
to be used with hearing aids operating in the telecoil
mode thus reducing unwanted background noise.
The Hearing Aid Compatibility rating is displayed on
thewirelessphonebox.
A phone is considered Hearing Aid Compatible
for acoustic coupling (microphone mode) if it has
an “M3” or “M4” rating. A digital wireless phone is
considered Hearing Aid Compatible for inductive
coupling (telecoil mode) if it has a “T3” or “T4” rating.
The tested M-Rating and T-Rating for this device
(FCC ID: MSQZ01KD) are M3 and T3.
You’ll want to try a number of wireless phones so
that you can decide which works the best with your
hearing aids. You may also want to talk with your
hearingaidprofessionalabouttheextenttowhich
your hearing aids are immune to interference, if they
have wireless phone shielding, and whether your
hearing aid has a HAC rating.
Industry Canada statement
A. This device complies with Industry Canada
license-exemptRSSstandard(s).Operationis
subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
A. Leprésentappareilestconformeauxnormes
CNRd’IndustrieCanadaapplicablesaux
appareilsradioexemptsdelicence.Son
utilisationestsujetteauxdeuxconditions
suivantes :
1) Cet appareil ne doit pas créer
d’interférences, et
2) Cet appareil doit tolérer tout type
d’interférences, y compris celles
susceptibles de provoquer un
fonctionnement non souhaité de l’appareil.
B. This Class B digital apparatus complies with
Canadian ICES-003.
B. Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
C. This device and its antenna(s) must not be
co-located or operating in conjunction with any
otherantennaortransmitter,excepttested
built-in radios.
C. Cet appareil et son ou ses antenne(s) ne
doivent pas être situés près de ou utilisés
conjointement avec une autre antenne ou
unautreémetteur,exceptionfaitedesradios
intégrées qui ont été testées.
D. The County Code Selection feature is disabled
for products marketed in the US/ Canada.
D. La fonction de sélection de l’indicatif du
pays est désactivée pour les produits
commercialisésauxÉtats-UnisetauCanada.
The IC ID for this device is 3568A-Z01KD.
L’identiantIndustrieCanadadecetappareilest
3568A-Z01KD.
Radiation Exposure Statement:
The product comply with the Canada portable
RFexposurelimitsetforthforanuncontrolled
environment and are safe for intended operation as
describedinthismanual.ThefurtherRFexposure
reduction can be achieved if the product can be
kept as far as possible from the user body or set
the device to lower output power if such function is
available.
Additional statement for phones:
This device has been tested for compliance with IC
SAR values at a typical operating near the body.
ToensurethatRFexposurelevelsbelowthelevels
tested, use accessories with this equipment to
maintain a minimum separation distance of 1cm
between the body of the user and the device.
These accessories should not contain metallic
components. It is possible that the accessories
used close to the body that do not meet these
requirements are not consistent with the SAR limits
and it is advisable to avoid using them.
Déclaration relative à l’exposition aux
radiations :
Leproduitestconformeauxlimitesd’exposition
auxfréquencesradiopourlesappareilsportables
du Canada établies pour un environnement non
contrôlé. Le produit est sûr pour un fonctionnement
tel que décrit dans ce manuel. Une réduction
supplémentairedel’expositionauxfréquencesradio
peut être réalisée lorsque le produit est maintenu
aussi loin que possible du corps de l’utilisateur ou
réglé sur une puissance de sortie plus faible si une
telle fonction est disponible.
Déclaration supplémentaire pour les téléphones :
Cet appareil a été testé en matière de conformité
auxlimitesdeDAS(Débitd’absorptionspécique)
d’IClorsd’uneutilisationnormaleàproximitédu
corps. Une distance de séparation minimale de 1cm
doit être maintenue entre le corps de l’utilisateur
et l’appareil lors de l’utilisation d’accessoires pour
queleniveaud’expositionauxfréquencesradione
dépassepaslesniveauxtestés.Cesaccessoires
ne doivent pas contenir de composants métalliques.
Il est possible que les accessoires utilisés près du
corpsetquinerépondentpasàcesexigencesne
soient pas compatibles avec les limites de DAS, il
est conseillé d’éviter de les utiliser.
FOR WLAN 5GHZ DEVICE:
Caution:
1) the device for operation in the band 5150-5250
MHz is only for indoor use to reduce the
potential for harmful interference to co-channel
mobile satellite systems;
2) themaximumantennagainpermittedfor
devices in the bands 5250-5350 MHz and
5470-5725 MHz shall comply with the e.i.r.p.
limit; and
3) themaximumantennagainpermittedfor
devices in the band 5725-5825 MHz shall
complywiththee.i.r.p.limitsspeciedforpoint-
to-point and non point-to-point operation as
appropriate.
4) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask
requirement set forth in Section 6.2.2(3) shall
be clearly indicated.
5) Users should also be advised that high-power
radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz
and 5650-5850 MHz and that these radars
could cause interference and/or damage to
LE-LAN devices.
Avertissement:
1) Les dispositifs fonctionnant dans la bande
5150-5250 MHz sont réservés uniquement
àuneutilisationenintérieuranderéduire
lesrisquesd’interférencepréjudiciablesaux
systèmes de satellites mobiles utilisant les
mêmescanaux;
2) Legainmaximald’antennepermispourles
dispositifs utilisant les bandes 5250-5350 MHz
et 5470-5725 MHz doit se conformer à la limite
de PIRE ; et
3) Legainmaximald’antennepermis(pourles
dispositifs utilisant la bande 5725-5825 MHz)
doitseconformeràlalimitedePIREspéciée
pourl’exploitationpointàpointetnonpointà
point, selon le cas.
4) Les pires angles d’inclinaison nécessaires pour
rester conforme à la limite de PIRE applicable
au masque d’élévation, et énoncée à la section
6.2.2 (3), doivent être clairement indiqués.
5) De plus, les utilisateurs devraient aussi être
avisés que les utilisateurs de radars de haute
EU Radio Equipment Directive
Compliance
Simplied EU Declaration of Conformity
Hereby, ASUSTek Computer Inc. declares that the
radio equipment ASUS_Z01KD/ ASUS_Z01KDA is
incompliancewithDirective2014/53/EU.Fulltextof
EU declaration of conformity is available at https://
www.asus.com/support/. (Search for ZE554KL)
RF Output Table
For ASUS_Z01KDA (ZE554KL), TW-3CA SKU
Items Maximum Radio-Frequency Output Power Table
Bluetooth Bluetooth RF (2400~2483.5 MHz) 8 dBm
Bluetooth 4.0-LE (2400~2483.5 MHz) 1 dBm
WLAN
2.4GHz 802.11b (2400~2483.5 MHz) 18.5 dBm
2.4GHz 802.11g (2400~2483.5 MHz) 19.0 dBm
2.4GHz 802.11n HT20 (2400~2483.5
MHz)
19.0 dBm
5GHz 802.11an HT20 (5150~5250;
5250~5350; 5470~5725 MHz)
19.5 dBm
5GHz 802.11an HT40 (5150~5250;
5250~5350; 5470~5725 MHz)
19.5 dBm
5GHz 802.11ac HT80 (5150~5250;
5250~5350; 5470~5725 MHz)
18.5 dBm
GSM
GSM 900 Burst (880~915; 925~960
MHz)
33 dBm
GSM 1800 Burst (1710~1785;
1805~1880 MHz)
30 dBm
WCDMA
WCDMA Band I (1920~1980; 2110~2170
MHz)
22 dBm
WCDMA Band III (1710~1785;
1805~1880 MHz)
24 dBm
WCDMA Band VIII (880~915; 925~960
MHz)
24 dBm
puissancesontdésignésutilisateursprincipaux
(c.-à-d., qu’ils ont la priorité) pour les bandes
5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient créer des interférences et/ou
desdommagesauxdispositifsLAN-EL.
RF Output Table (continued)
For ASUS_Z01KDA (ZE554KL), TW-3CA SKU
Items Maximum Radio-Frequency Output Power Table
LTE
LTE Band I (1920~1980; 2110~2170
MHz)
23 dBm
LTE Band III (1710~1785; 1805~1880
MHz)
21 dBm
LTE Band VII (2500~2570; 2620~2690
MHz)
21 dBm
LTE Band VIII (880~915; 925~960 MHz) 23 dBm
LTE Band XVIII (815~830; 860~875
MHz)
23 dBm
LTE Band XIX (830~845; 875~890 MHz) 23 dBm
LTE Band XXVIII (703~748; 758~803
MHz)
23 dBm
LTE Band XXXVIII (2570~2620 MHz) 23 dBm
LTE Band XL (2300~2400 MHz) 23 dBm
NFC Near Field Communication RF (13.56
MHz)
-14.30
dBµA/m
RF Output Table
For ASUS_Z01KD (ZE554KL), TW-2CA SKU
Items Maximum Radio-Frequency Output Power Table
Bluetooth Bluetooth RF (2400~2483.5 MHz) 8 dBm
Bluetooth 4.0-LE (2400~2483.5 MHz) 1 dBm
WLAN
2.4GHz 802.11b (2400~2483.5 MHz) 18.5 dBm
2.4GHz 802.11g (2400~2483.5 MHz) 19.0 dBm
2.4GHz 802.11n HT20 (2400~2483.5
MHz)
19.0 dBm
5GHz 802.11an HT20 (5150~5250;
5250~5350; 5470~5725 MHz)
19.5 dBm
5GHz 802.11an HT40 (5150~5250;
5250~5350; 5470~5725 MHz)
19.5 dBm
5GHz 802.11ac HT80 (5150~5250;
5250~5350; 5470~5725 MHz)
18.5 dBm
RF Output Table
For ASUS_Z01KD (ZE554KL), WW-2CA SKU
Items Maximum Radio-Frequency Output Power Table
Bluetooth Bluetooth RF (2400~2483.5 MHz) 8 dBm
Bluetooth 4.0-LE (2400~2483.5 MHz) 1 dBm
WLAN
2.4GHz 802.11b (2400~2483.5 MHz) 18.5 dBm
2.4GHz 802.11g (2400~2483.5 MHz) 19.0 dBm
2.4GHz 802.11n HT20 (2400~2483.5
MHz)
19.0 dBm
5GHz 802.11an HT20 (5150~5250;
5250~5350; 5470~5725 MHz)
19.5 dBm
5GHz 802.11an HT40 (5150~5250;
5250~5350; 5470~5725 MHz)
19.5 dBm
5GHz 802.11ac HT80 (5150~5250;
5250~5350; 5470~5725 MHz)
18.5 dBm
Items Maximum Radio-Frequency Output Power Table
GSM
GSM 900 Burst (880~915; 925~960 MHz) 33 dBm
GSM 1800 Burst (1710~1785; 1805~1880
MHz)
30 dBm
WCDMA
WCDMA Band I (1920~1980; 2110~2170
MHz)
22 dBm
WCDMA Band III ( 1710~1785; 1805~1880
MHz)
24 dBm
WCDMA Band VIII (880~915; 925~960
MHz)
24 dBm
LTE
LTE Band I (1920~1980; 2110~2170 MHz) 23 dBm
LTE Band III (1710~1785; 1805~1880 MHz) 21 dBm
LTE Band VII (2500~2570; 2620~2690
MHz)
21 dBm
LTE Band VIII (880~915; 925~960 MHz) 23 dBm
LTE Band XL (2300~2400 MHz) 23 dBm
NFC Near Field Communication RF (13.56 MHz) -14.30
dBµA/m
RF Output Table (continued)
For ASUS_Z01KD (ZE554KL), TW-2CA SKU
Items Maximum Radio-Frequency Output Power Table
GSM
GSM 900 Burst (880~915; 925~960
MHz)
33 dBm
GSM 1800 Burst (1710~1785;
1805~1880 MHz)
29 dBm
WCDMA
WCDMA Band I (1920~1980;
2110~2170 MHz)
23 dBm
WCDMA Band VIII (880~915; 925~960
MHz)
23 dBm
LTE
LTE Band I (1920~1980; 2110~2170
MHz)
22 dBm
LTE Band III (1710~1785; 1805~1880
MHz)
24 dBm
LTE Band V(824~849; 869~894 MHz) 23 dBm
LTE Band VII (2500~2570; 2620~2690
MHz)
22.5 dBm
LTE Band VIII (880~915; 925~960 MHz) 23 dBm
LTE Band XX (832~862; 791~821 MHz) 23 dBm
LTE Band XL (2300~2400 MHz) 23 dBm
RF Output Table (continued)
For ASUS_Z01KD (ZE554KL), WW-2CA SKU
RF Output Table
For ASUS_Z01KDA (ZE554KL), Operator SKU
Items Maximum Radio-Frequency Output Power Table
Bluetooth Bluetooth RF (2400~2483.5 MHz) 8 dBm
Bluetooth 4.0-LE (2400~2483.5 MHz) 1 dBm
WLAN
2.4GHz 802.11b (2400~2483.5 MHz) 17.5 dBm
2.4GHz 802.11g (2400~2483.5 MHz) 17.5 dBm
2.4GHz 802.11n HT20 (2400~2483.5
MHz)
17.5 dBm
5GHz 802.11an HT20 (5150~5250;
5250~5350; 5470~5725 MHz)
17.5 dBm
5GHz 802.11an HT40 (5150~5250;
5250~5350; 5470~5725 MHz)
17.5 dBm
5GHz 802.11ac HT80 (5150~5250;
5250~5350; 5470~5725 MHz)
16.5 dBm
The Wi-Fi operating in the band 5150-5350MHz
shall be restricted to indoor use for countries listed
in the table below:
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
RF Output Table (continued)
For ASUS_Z01KDA (ZE554KL), Operator SKU
Items Maximum Radio-Frequency Output Power Table
GSM
GSM 900 Burst (880~915; 925~960
MHz)
33 dBm
GSM 1800 Burst (1710~1785;
1805~1880 MHz)
30 dBm
WCDMA
WCDMA Band I (1920~1980;
2110~2170 MHz)
24 dBm
WCDMA Band VIII (880~915; 925~960
MHz)
24 dBm
LTE
LTE Band I (1920~1980; 2110~2170
MHz)
23 dBm
LTE Band III (1710~1785; 1805~1880
MHz)
23 dBm
LTE Band VII (2500~2570; 2620~2690
MHz)
22.5 dBm
LTE Band VIII (880~915; 925~960 MHz) 23 dBm
LTE Band XX (832~862; 791~821 MHz) 23 dBm
LTE Band 28 (703~748 ;758~803 MHz) 23 dBm
LTE Band 38 (2570~2620 MHz) 23 dBm
LTE Band XL (2300~2400 MHz) 23 dBm
NOTE: This RF output power table is for EU
member states, the EEA States, the EFTA States
and Turkey only. The frequency range and the
RF output power may differ from other non-EU
countries.
RF Exposure Information
This ASUS product has been tested and meets
applicable European SAR limits. The SAR limit is
2.0 W/kg in countries that set the limit averaged
over10gramsoftissue.ThespecicmaximumSAR
values for this device are as follows:
For ASUS_Z01KD (ZE554KL) & ASUS_Z01KDA
(ZE554KL), TW-2CA & TW-3CA SKU:
• Head:0.96W/Kg
• Body:1.53W/Kg
For ASUS_Z01KD (ZE554KL), WW-2CA SKU:
• Head:0.51W/Kg
• Body:1.58W/Kg
For ASUS_Z01KDA (ZE554KL), Operator SKU:
• Head:1.42W/Kg
• Body:1.48W/Kg
When carrying this device or using it while worn on
the body, either use an approved accessory such
as a holster or otherwise maintain a distance of 0.5
cm from the body to ensure compliance with RF
exposurerequirements.
CE Marking
Using GPS (Global Positioning System)
on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
• Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
• Forrst-timeuseofaGPS-enabledappon
your device, ensure that you are outdoors to
get the best positioning data.
• When using a GPS-enabled app on
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen
at high volume levels for long periods.
For France, headphones/earphones for this
device are compliant with the sound pressure level
requirement laid down in the applicable EN 50332-
1:2013 and/or EN50332-2:2013 standard required
by French Article L.5232-1.
Safety information
CAUTION! Use of controls or adjustments or
performance of procedures other than those
speciedhereinmayresultinhazardousradiation
exposure.
ASUS Phone care
• UseyourASUSPhoneinanenvironmentwith
ambient temperatures between 0 °C (32 °F)
and 35 °C (95 °F).
The battery
WARNING: Disassembling the battery by yourself
will void its warranty and may cause serious harm.
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
• Donotremovethenon-detachableLi-polymer
battery as this will void the warranty.
• Avoidcharginginextremelyhighorlow
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
• Donotremoveandreplacethebatterywitha
non-approved battery.
• UseonlyASUSbattery.Usingadifferent
battery may cause physical harm/injury and
may damage your device.
• Donotremoveandsoakthebatteryinwateror
any other liquid.
• Nevertrytoopenthebatteryasitcontains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
• Donotremoveandshort-circuitthebattery,as
itmayoverheatandcauseare.Keepitaway
from jewelry or metal objects.
• Donotremoveanddisposeofthebattery
inre.Itcouldexplodeandreleaseharmful
substances into the environment.
• Donotremoveanddisposeofthebatterywith
your regular household waste. Take it to a
hazardous material collection point.
• Donottouchthebatteryterminals.
• Toavoidreorburns,donotdisassemble,
bend, crush, or puncture the battery.
NOTES:
• Riskofexplosionifbatteryisreplacedbyan
incorrect type.
• Disposeofusedbatteryaccordingtothe
instructions.
The charger
• UseonlythechargersuppliedwithyourASUS
Phone.
• Neverpullthechargercordtodisconnectit
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
• DonotusetheASUSPhoneinanextreme
environment where high temperature or high
humidityexists.TheASUSPhoneperforms
optimally in an ambient temperature between 0
°C (32 °F) and 35 °C (95 °F).
• DonotdisassembletheASUSPhoneorits
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shockorremayresult.
• Donotshort-circuitthebatteryterminalswith
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
General Usage (typical body-worn)
This device (front & rear side) should be operated
under a seperation distance of 5 mm from the
human body.
*Theotherfoursidesarenotincloseproximityto
the human body at the general use as described
above.
India E-waste (Management) Rules
2016
This product complies with the “India E-Waste
(Management) Rules, 2016” and prohibits
useoflead,mercury,hexavalentchromium,
polybrominated biphenyls (PBBs) and
polybrominated diphenyl ethers (PBDEs) in
concentrationsexceeding0.1%byweightin
homogenousmaterialsand0.01%byweightin
homogenousmaterialsforcadmium,exceptforthe
exemptionslistedinScheduleIIoftheRule.
Regional notice for Singapore
This ASUS Phone complies
with IMDA Standards.
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
DO NOT throw this product in municipal
waste. This product has been designed to
enable proper reuse of parts and recycling.
The symbol of the crossed out wheeled
bin indicates that the product (electrical,
electronic equipment and mercury-
containing button cell battery) should not
be placed in municipal waste. Check
local regulations for disposal of electronic
products.
DONOTthrowthisproductinre.DO
NOT short circuit the contacts. DO NOT
disassemble this product.
WARNING
Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
NOTE: For more legal and e-labelling information,
check on your device from Settings > About >
Legal information.
Copyright © 2017 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website,andshallremaintheexclusivepropertyofASUSand/orits
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
ASUS
Address: 4F, 150 Li-Te Rd., Peitou, Taipei,
Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressedintheGSMstandards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax:886228907698
Support:http://vip.asus.com/eservice/techserv.aspx
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)