ATBS Technology SC-BT1200I OBD2 mini Interpreter Dongle User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1890549
Application ID	CQpAQ0NnqRVdoKCgq8S1vQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.17kB (139600 bits)
Date Submitted	2013-01-30 00:00:00
Date Available	2013-01-30 00:00:00
Creation Date	2012-12-22 17:44:24
Producing Software	Microsoft® Word 2010
Document Lastmod	2012-12-22 17:44:24
Document Title	Manual
Document Creator	Microsoft® Word 2010
Document Author:	Patrick Peng

BT1200i User Guide
1 Introduction:
seconds. If the learning connection is
The BT1200i OBD2 dongle is a multi- protocol
unsuccessful, please disconnect then plug it and
decoder, providing with Bluetooth interface. iPod and
press RESET to clear the memory to re-learn.
iPhone with a Bluetooth can connect the device to
read car information. Once your iPod, iPhone runs
4. Compatible APPs and Features:
the OBD2 APP, it will provide the fuel system status,
The BT1200i is a OBD2 interpreter. What features
engine load, engine temperature, fuel pressure,
you can have depended on what APPs you install
intake manifold pressure, engine speed, vehicle
on iPod touch, iPhone and iPad. There are a lot of
speed, intake air temperature, air flow, throttle
commercial or free software are available to enable
position, battery voltage, fault code, and other
BT1200i, such as Saving Fuel, Safe Start, OBD2
information sent to your phone via Bluetooth. More
Black Box. The features of the software differ from
information and clear fault codes can be read by
one another. User should choose his own software
using professional diagnostic software.
by his preference. For more details about the
software, please consult the software vendors. The
2. Appearance:
BT1200i Bluetooth ID is "ATBS OBD2".
5. Electrical specifications
Wiring
OBD2 connector
Voltage
Operation 10 ~16V
Current
Operation 50 mA，
RESET: Clear protocol button.
OBD:
Communicate with car ECU, red LED.
BT:
Bluetooth working, blue LED.
Sleeping < 3 mA
Temperature
Operation -30~ 85 ℃
Bluetooth
Class 2
6. Troubleshooting
3. Procedure:
6.1 When the BT1200i goes to sleep, it only can be
3.1 Stop and turn off the engine.
Vehicle moving not allowed to operate.
waked up by starting generator once you start the
engine. If the red light does not light , please
disconnect then plug it again,
and check the
OBD2 connector whether is loose.
6.2 To use this device on other vehicles, you have to
OBD2
re-learn new protocol. Please press RESET key to
clear its memory first.
3.2 The OBD socket of vehicle was usually located
6.3 The first time BT1200i learns protocol, do not start
under dashboard. Please find it out and plug
BT1200i.
3.3 The BT1200i offers more than 25 protocols and
the engine (just ACC ON). If the dashboard has
supports hundreds of vehicle models. It is
necessary to learn your vehicle's protocol
successfully before it works normally. Once you
plug BT1200i into OBD2 connector, it will try to
communicate with car ECU. The red light starts
strange display during learning period, it will return
to normal after restarting engine.
6.4 When the blue led flash 15 seconds to put out,
please start engine again, and press RESET switch
on your iPhone. This time the BT1200i will learn
next protocol, the user can see the process on your
iPhone.
flashing after the learning success. The blue light
starts flashing and the learned protocol will be
saved. The user can run into APP, Saving Fuel, to
setting page, see the process of learning. When
the protocol No. is stop, the device learn right
protocol.
3.4
Note: the longest time of trying to connect is 300
Copyright (C) 2010 ATBS Technology Co. All rights reserved. R2.1
7.NOTE and CAUTION：
7.1 The information of BT1200i is for reference only.
Do not operate it when you are driving.
7.2 Do not directly use water or chemical to clean it.
7.3 Do not place the unit at the dusty place. It could
cause malfunction.
7.4 Do not remove cover, or modify the product.
correctly use the product. Other damages caused
Contact your local dealer to perform servicing such
by natural and man-made disasters, drops, soak
as inspection, adjustment, or repair work.
water, smolder, and non-normal power supply are
7.5 The product warranty for one year. Please
excluded from the warranty.
FCC Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.(Example – use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limit set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This devise must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Copyright (C) 2010 ATBS Technology Co. All rights reserved. R2.1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : zh-TW
Tagged PDF                      : Yes
Author                          : Patrick Peng
Creator                         : Microsoft® Word 2010
Create Date                     : 2012:12:22 17:44:24+08:00
Modify Date                     : 2012:12:22 17:44:24+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools